source: BMXNET_RPMS_dotNET_UTILITIES-BMX/branch/IHS BMX Framework/IndianHealthService.BMXNet.Doc/buildhelp/assembler/Comments/BMXWIN40.xml@ 1146

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>BMXWIN40</name>
    </assembly>
    <members>
        <member name="F:IndianHealthService.BMXNet.WinForm.Forms.ExceptionMessageDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.ExceptionMessageDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.ExceptionMessageDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.AttemptingLoginEventArgs">
            <summary>
            The LoginProcess provides the AttemptingLoginEvent to allow changes in workflow with
            this Cancelable event args class
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.AttemptingLoginEventArgs.Process">
            <summary>
            The LoginProcess can be modified (e.g. ConnectionSpec) after the user has OK'd the dialog
            but before the login attempt is made. 
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.AttemptingLoginEventArgs.Handled">
            <summary>
            The receiver of the event can perform the login differently or not allow
            the login.  If Handled is set the True the LoginProcess assumes the login was attempted.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.AttemptingLoginEventArgs.HandledSucccessfully">
            <summary>
            Set HandledSucccessfully is the Handled logging was successful.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings">
            <summary>
            Container for all persistent and available connection spec
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.AddConnectionSpec(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec)">
            <summary>
            Add aSpec to the receiver.  Not persisted
            </summary>
            <param name="aSpec"></param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.RemoveConnectionSpec(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec)">
            <summary>
            Remove aSpec from the receiver.  Not persisted.
            </summary>
            <param name="aSpec"></param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.MoveConnectionSpecUp(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec)">
            <summary>
            
            </summary>
            <param name="aSpec"></param>
            <returns>True if there was any movement</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.MoveConnectionSpecDown(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec)">
            <summary>
            
            </summary>
            <param name="aSpec"></param>
            <returns>True if there was any movement</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.Revert">
            <summary>
            Refresh the receiver from the current state of the persistent store
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.ManagedConnectionSpecs">
            <summary>
            Answer all connection specs in user defined order
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.ConnectionSpecs">
            <summary>
            Answer all available connection specs, including command-line spec
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSettings.DefaultConnectionSpec">
            <summary>
            Answer the default connection spec. If there is not
            user defined default, answer the first connection spec
            </summary>
        </member>
        <member name="F:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConnectionPropertiesDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConnectionPropertiesDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConnectionPropertiesDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="F:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConfigurationManagementDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConfigurationManagementDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Forms.RpmsServerConfigurationManagementDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="F:IndianHealthService.BMXNet.Forms.ChangeDivisionDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.Forms.ChangeDivisionDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.Forms.ChangeDivisionDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Configuration.PersistentStore">
            <summary>
            The persistent store interface is to save local setting configuration data.  The
            settings are written and read based on a string a keys, like a path.
            
            The keys are application specific.  Some example could be: "Product","Version"
            
            The location of the PersistentStore is based on the implementation.  The LocalPersistentStore
            provides the settings to be stored in special OS forlders like Environment.SpecialFolder.LocalApplicationData
            so that the settings would be based both on the logged in user and keys.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.PersistentStore.Write``1(``0,System.String[])">
            <summary>
            The implementor must serialize the object anObject given the keys.
            </summary>
            <typeparam name="T">The type of the object to be serialized to the store</typeparam>
            <param name="anObject">The objects to be stored</param>
            <param name="keys">The key used to locate the settings</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.PersistentStore.Read``1(System.String[])">
            <summary>
            The implementor must deserialize an object of type T from the given location based
            on the keys
            </summary>
            <typeparam name="T">The type of the object to be deserialized from the store</typeparam>
            <param name="keys">The keys used to locate the object</param>
            <returns>An deserialized object, or null if no valid objects exists at the keys</returns>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.LoginAttemptedEventArgs">
            <summary>
            The LoginProcess provides feedback after every LoginAttempt, even if the login
            attempt was performer using the AttemptingLoginEvent.  If a custom dialog box or action can
            take place and Handled set to True, the LoginProcess will not display the standard dialog.
            The LoginProcess is available so examine or modify.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.AboutDialog">
            <summary>
            Stardardized "About" dialog that displays information from the executable's (RootAssembly) AssemblyInfo:
            <list>
            AssemblyTitle
            AssemblyProduct
            AssemblyVersion
            AssemblyCopyright
            AssemblyCompany
            AssemblyDescription
            </list>
            <para>
            Additionally, a list box showing all non-system .NET assemblies is displayed.  Set IncludeRoot=True
            if the RootAssembly should be included in the list.
            </para>
            <example>
            Usage of dialog:
            <code>
            AboutDialog dialog=new AboutDialog();
            dialog.RootAssembly = Assembly.GetExecutingAssembly();
            dialog.IncludeRoot = true;
            dialog.Show(this.Parent);    
            </code>
            By default, the RootAssebmly is the Assembly.GetExecutingAssembly();
            </example>
            </summary>
        </member>
        <member name="F:IndianHealthService.BMXNet.WinForm.AboutDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.AboutDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.AboutDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.AboutDialog.IncludeRoot">
            <summary>
            Set to True if the RootAssembly should be included in the list of displayed assemblies.  False by default.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.AboutDialog.RootAssembly">
            <summary>
            The assembly that all references are followed from.  The EntryAssembly by default.
            </summary>
        </member>
        <member name="F:IndianHealthService.BMXNet.Forms.RpmsLoginDialog.components">
            <summary>
            Required designer variable.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.Forms.RpmsLoginDialog.Dispose(System.Boolean)">
            <summary>
            Clean up any resources being used.
            </summary>
            <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.Forms.RpmsLoginDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Model.WinPatient">
            <summary>
            Implementation of Patient.  Attempt to stay within CSS_Patient capabilties
            
            this.CssPatient.Age
            this.CssPatient.DOB
            this.CssPatient.Detail
            this.CssPatient.DOD
            this.CssPatient.HRN
            this.CssPatient.ICN
            this.CssPatient.Location
            this.CssPatient.LocationName
            this.CssPatient.PrimaryProvider
            this.CssPatient.PrimaryTeam
            this.CssPatient.RoomBed
            this.CssPatient.Sex
            this.CssPatient.SSN*/
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Configuration.Settings">
            <summary>
            Provides settings interface and implementation for settings from command-line,
            stored in PersistentStore, or hardcoded in application.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Set(System.String,System.Boolean)">
            <summary>
            Update the Setting value aName to aBool
            </summary>
            <param name="aName">Name of the Setting</param>
            <param name="aBool">Boolean value to set</param>
            <returns>True if the setting was changed, False if the setting was the same value</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Set(System.String,System.Int32)">
            <summary>
            Update the Setting value aName to anInt
            </summary>
            <param name="aName">Name of the Setting</param>
            <param name="aBool">Integer value to set</param>
            <returns>True if the setting was changed, False if the setting was the same value</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Set(System.String,System.String)">
            <summary>
            Update the Setting value aName to a string
            </summary>
            <param name="aName">Name of the Setting</param>
            <param name="aBool">String value to set</param>
            <returns>True if the setting was changed, False if the setting was the same value</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Get(System.String,System.String)">
            <summary>
            Get the string Setting named aString.  Answer the defaultValue if the Setting named
            aString does not exist in the receiver or it's Backup chain.
            </summary>
            <param name="aString">Name of the setting</param>
            <param name="defaultValue">Default value</param>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Get(System.String,System.Boolean)">
            <summary>
            Get the boolean Setting named aString.  Answer the defaultValue if the Setting named
            aString does not exist in the receiver or it's Backup chain.
            </summary>
            <param name="aString">Name of the setting</param>
            <param name="defaultValue">Default value</param>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Get(System.String,System.Int32)">
            <summary>
            Get the Integer Setting named aString.  Answer the defaultValue if the Setting named
            aString does not exist in the receiver or it's Backup chain.
            </summary>
            <param name="aString">Name of the setting</param>
            <param name="defaultValue">Default value</param>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.MergeSettings(IndianHealthService.BMXNet.WinForm.Configuration.Settings)">
            <summary>
            Merge the settings from someSettings into the receiver
            </summary>
            <param name="someSettings">Settings to copy</param>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Load">
            <summary>
            Load the receiver's settings from the PersistentStore
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.Settings.Save">
            <summary>
            Save the receiver's settings to the PersistentStore
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.Settings.WillPersistFutureSets">
            <summary>
            After set to true, every setting update will be flushed the PersistentStore if
            the Settings is configured with one
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.Settings.IsPersistent">
            <summary>
            Answer true if the current Settings IsPersistent.  It is possible that the Backup
            Settings IsPersistennt
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Configuration.LocalPersistentStore">
            <summary>
            LocalPersistentStore is the core BMX implementation for the most common
            local setting store patterns:
            
            1) In a special folder
            2) In any specified path
            3) In IsolatedStorage
            
            Use the object factory static class methods to create the different storage 
            mechanisms.
            </summary>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.LocalPersistentStore.TranslateToValidFileName(System.String[])">
            <summary>
            Remove on non-letters, digits, to _ and add Bmx_ to the front.
            </summary>
            <param name="aKey"></param>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.LocalPersistentStore.ReadFromIsolatedStorage``1(System.String[])">
            <summary>
            Isolated storage is scoped on user/application isolated storage
            </summary>
            <param name="aKey"></param>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.Configuration.LocalPersistentStore.WriteToIsolatedStorage``1(``0,System.String[])">
            <summary>
            Isolated storage is scoped on user/application isolated storage
            </summary>
            <param name="aKey"></param>
            <param name="someContent"></param>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec">
            <summary>
            Specification for BMX RPMS Connection.  Instances of this class are serialized as XML
            to a PersisentStore and are used is picklists for users to select from.  
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.Name">
            <summary>
            The required display name of a connection used in pick lists
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.Server">
            <summary>
            The required Name/IP Address of the RPMS Host
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.ReceiveTimeout">
            <summary>
            The optional time in millseconds to wait for a response from RPMS
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.SendTimeout">
            <summary>
            The optional time in millseconds to wait when sending a request to RPMS
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.Port">
            <summary>
            The required TCP/IP port number of the RPMS BMX Broker 
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.NameSpace">
            <summary>
            The optional Namespace to use in RPMS.  Will default to BMX Brokers namespace.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.IsDefault">
            <summary>
            The optional flag to specify this connection as the users default.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.UseWindowsAuthentication">
            <summary>
            The optional flag to specify that WindowsAuthenication should be attempted.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec.UseDefaultNamespace">
            <summary>
            The optional flag to specify that the BMX Broker default namespace should be used.
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.LoginProcess">
             <summary>
             This class models the workflow of the LoginProcess.  It correographs UI and non-UI
             login methods, login cancelling, management dialogs, and provides hooks (events) to 
             customize the login workflow.
             </summary>
             <example>
             See the SDK for other examples.
             <code>
             this.Framework = WinFramework.CreateWithNetworkBroker(true);
             this.Framework.LoadSettings(LocalPersistentStore.CreateIn(Environment.SpecialFolder.LocalApplicationData, EntryAssemblyInfo.AssemblyCompany + "/" + EntryAssemblyInfo.AssemblyProduct, false), "settings");
             this.Framework.LoadConnectionSpecs(LocalPersistentStore.CreateIn(Environment.SpecialFolder.LocalApplicationData, EntryAssemblyInfo.AssemblyCompany + "/" + EntryAssemblyInfo.AssemblyProduct, false), "connectiosn");
             LoginProcess login = this.Framework.CreateLoginProcess();
             
             //Attempt a non-UI WindowsAuth if and only if there is a default connection with WindowsAuth
             //Of course, an application can set its own policy of when to AttemptWindowsAuthLogin()
             
             if (login.HasDefaultConnectionWithUseWindowsAuth)
             {
                 login.AttemptWindowsAuthLogin();
             }
             
             //If not attempted yet, i.e. skipped the AttemptWindowsAuthLogin(), or was unsuccessul, try and UI login
             if (!login.WasLoginAttempted || !login.WasSuccessful)
             {
                 login.AttemptUserInputLogin(IndianHealthService.BMXNet.Util.EntryAssemblyInfo.AssemblyTitle+" Login", 3,!this.Framework.BootStrapSettings.Get("lockedit",false), this);
             }
                    
             //If the login process was unable to login after the max tries (or fow other configuration reasons), exit the application
             if (!login.WasSuccessful)
             {
                 this.Close();
                 return;
             }
              
             // Making sure that the user's division is set.  Can use AttemptUserInputSetDivision() or the application can devise another solution
             if ((this.Framework.User.Division == null) &amp;&amp; !this.Framework.AttemptUserInputSetDivision("Set Initial Division", this))
             {
                 this.Close();
                 return;
             }
            
             // Logged in with valid user and division 
              this.RemoteSession = this.Framework.PrimaryRemoteSession;
             </code></example>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.AttemptWindowsAuthLogin(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec)">
            <summary>
            Attempt a WindowsAuthentication Login and answer true if it was successful.
            </summary>        
            <returns>True if login was successful</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.AttemptWindowsAuthLogin">
            <summary>
            Using the current default connection spec, attempt a WindowsAuthentication Login and answer true if it was successful.
            </summary>        
            <remarks>
            Most common approach when using the DefaultConnection feature the RpmsConnection spec class.
            </remarks>
            <returns>True if login was successful</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.AttemptUserInputLogin(System.String,System.Int32,System.Boolean,System.Windows.Forms.IWin32Window)">
            <summary>
            Attempt an interactive UI login.  There are several useful arguments to control the process and appearance of the this process.
            </summary>
            <param name="aDialogTitle">The title of the login.  Customize to be something like "MyApplication Login"</param>
            <param name="maxAttempts">The number of attempts before cancelling</param>
            <param name="enableConnectionManagement">If false, the user will not be able to change the connections.  This is useful for lockdown situations</param>
            <param name="aUiOwnerForPositioningDialog">Provide your main application as the window owner so the LoginDialog box is correctly managed.</param>
            <returns>True if login was successful</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.Succeeded">
            <summary>
            If the application is managing the actual login, send Succeeded() to indicate success.  
            </summary>
            <remarks>
            Do not set WasSuccessful to true.
            </remarks>
            <returns>True if successful</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.AttemptAccessVerifyLogin(IndianHealthService.BMXNet.WinForm.Configuration.RpmsConnectionSpec,System.String,System.String)">
            <summary>
            Attempt a headless non-interactive UI login.  This would be useful for an ASP.NET or NT-service type application
            </summary>
            <param name="aSpec">The RpmsConnectionSpec to use during the login process</param>
            <param name="anAccessCode">The clear text access code</param>
            <param name="aVerifyCode">The clear text verify code</param>
            <returns>True if the login was successful</returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.LoginProcess.HandleLoginAttemptedFailed">
            <summary>
            Will trigger the LoginAttempted event 
            </summary>
            <returns>Answer true if the LoginProcess has been Canceled or handled</returns>
        </member>
        <member name="E:IndianHealthService.BMXNet.WinForm.LoginProcess.AttemptingLogin">
            <summary>
            Triggered before every login attempt. See <see cref="T:IndianHealthService.BMXNet.WinForm.AttemptingLoginEventArgs" /> for details .
            </summary>
        </member>
        <member name="E:IndianHealthService.BMXNet.WinForm.LoginProcess.LoginAttempted">
            <summary>
            Triggered after every login attempt. See <see cref="T:IndianHealthService.BMXNet.WinForm.LoginAttemptedEventArgs" /> for details .
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.Cancel">
            <summary>
            During a LoginAttempted the LoginProcess can be Cancelled by setting Cancel to True.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.IsSwitchServerModeEnabled">
            <summary>
            If set to True, the Connection combo box on the Login screen with be dropped down when the 
            dialog is displayed.  This is useful for applications that have an option to change Connections. 
            The default is False.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.AutoSetDivisionToLastLookup">
            <summary>
            If set to True, RPMS is checked and if there was a previously set division for the user it will be used, otherwise 
            MustResolveDivision will be set to True and the division will need to be set for the user.
            The default is True
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.MustResolveDivision">
            <summary>
            If the division for the user has not been determine after the LoginProcess, MustResolveDivision will be set to True.
            The default if False.  
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.LoginAttempts">
            <summary>
            The number of login attempts so far.  This value can be modified during the AttemptingLogin and LoginAttempted events.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.MaxAttempts">
            <summary>
            The number of login attempts before cancelling the LoginProcess.  The default value is 3.  This value can be modified during the AttemptingLogin and LoginAttempted events.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.WasLoginAttempted">
            <summary>
            True if a login was attempted.  False if the user is presented with a LoginDialog and "Cancel" is selected.
            The value is changed during every login attempt cycle. 
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.WasSuccessful">
            <summary>
            True if the most recent login attempt was successful.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.FailureMessage">
            <summary>
            A reasonable message to display to the user if the last login attempt failed.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.FailureException">
            <summary>
            If an exception occured during the last login attempt, FailureException will be set to it.
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.ConnectionSpec">
            <summary>
            The active ConnectionSpec being used to login.  With care, the property can be changed or the instance can be modified during the AttemptingLogin and LoginAttempted events
            with care.  
            </summary>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.LoginProcess.HasDefaultConnectionWithUseWindowsAuth">
            <summary>
            Answer True if there is a default managed connection that uses WindowsAuthenication
            </summary>
        </member>
        <member name="T:IndianHealthService.BMXNet.WinForm.WinFramework">
            <summary>
            Instance manages the context/access to RPMS 
            - Configuration information
            - Login entry points
            - External changes to patient context
            </summary>
            
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.WinFramework.ImHereServer">
            <summary>
            Ping the server, will reset read-timeout
            </summary>
            <returns></returns>
        </member>
        <member name="M:IndianHealthService.BMXNet.WinForm.WinFramework.AttemptUserInputSetDivision(System.String,System.Windows.Forms.IWin32Window)">
            <summary>
            Answer true if changed, false if the same
            </summary>
            <param name="aDialogTitle"></param>
            <param name="aUiOwnerForPositioningDialog"></param>
            <returns></returns>
        </member>
        <member name="P:IndianHealthService.BMXNet.WinForm.WinFramework.Log">
            <summary>
            Logger to be used by all BMX objects.         
            </summary>
        </member>
    </members>
</doc>