source: BMXNET_RPMS_dotNET_UTILITIES-BMX/trunk/m/BMXRPC.m@ 832

Last change on this file since 832 was 645, checked in by Sam Habiel, 15 years ago

Initial Import of BMX.net code
File size: 5.7 KB
Line 
1BMXRPC ; IHS/OIT/HMW - BMX REMOTE PROCEDURE CALLS ;
2 ;;2.1;BMX;;Jul 26, 2009
3 ;;Stolen from:* MICHAEL REMILLARD, DDS * ALASKA NATIVE MEDICAL CENTER *
4 ;; GENERIC LOOKUP UTILITY FOR RETURNING MATCHING RECORDS
5 ;; OR TABLES TO RPC'S.
6 ;
7 ; *** NOTE: I have discovered a number of cases where these calls
8 ; produce errors (with error messages to IO) or simply
9 ; do not work correctly. ANY CALL to this utility
10 ; should be thoroughly tested in the M environment
11 ; before being used as an RPC.
12 ;
13 ;----------
14LOOKUP(BMXGBL,BMXFL,BMXFLDS,BMXFLG,BMXIN,BMXMX,BMXIX,BMXSCR,BMXMC) ;EP
15 ;---> Places matching records from requested file into a
16 ;---> result global, ^BMXTEMP($J). The exact global name
17 ;---> is returned in the first parameter (BMXGBL).
18 ;---> Records are returned one per node in the result global.
19 ;---> Each record is terminated with a $C(30), for parsing out
20 ;---> on the VB side, since the Broker concatenates all nodes
21 ;---> into a single string when passing the data out of M.
22 ;---> Requested fields within records are delimited by "^".
23 ;---> NOTE: The first "^"-piece of every node is the IEN of
24 ;---> that entry in its file; the requested fields follow.
25 ;---> The final record (node) contains Error Delimiter,
26 ; $C(31)_$C(31), followed by error text, if any.
27 ;
28 ;---> Parameters:
29 ; 1 - BMXGBL (ret) Name of result global for Broker.
30 ; 2 - BMXFL (req) File for lookup.
31 ; 3 - BMXFLDS (opt) Fields to return w/each entry.
32 ; 4 - BMXFLG (opt) Flags in DIC(0); If null, "M" is sent.
33 ; 5 - BMXIN (opt) Input to match on (see Algorithm below).
34 ; 6 - BMXMX (opt) Maximum number of entries to return.
35 ; 7 - BMXIX (opt) Indexes to search.
36 ; 8 - BMXSCR (opt) Screen/filter (M code).
37 ; 9 - BMXMC (opt) Mixed Case: 1=mixed case, 0=no change.
38 ; (Converts data in uppercase to mixed case.)
39 ;
40 ;---> Set variables, kill temp globals.
41 N (BMXGBL,BMXFL,BMXFLDS,BMXFLG,BMXIN,BMXMX,BMXIX,BMXSCR,BMXMC)
42 S BMX31=$C(31)_$C(31)
43 S BMXGBL="^BMXTEMP("_$J_")",BMXERR="",U="^"
44 K ^BMXTMP($J),^BMXTEMP($J)
45 ;
46 ;---> If file number not provided, return error.
47 I '$G(BMXFL) D ERROUT("File number not provided.",1) Q
48 ;
49 ;---> If no fields provided, pass .01.
50 ;---> IEN will always be the first piece of data returned.
51 ;---> NOTE: If .01 is NOT included, but the Index to lookup on is
52 ;---> NOT on the .01, then the .01 will be returned
53 ;---> automatically as the second ^-piece of data in the
54 ;---> Result Global.
55 ;---> So it would be: IEN^.01^requested fields...
56 I $G(BMXFLDS)="" S BMXFLDS=".01"
57 ;
58 ;---> If no index or flag provided, set flag="M".
59 I $G(BMXFLG)="" D
60 .I $G(BMXIX)="" S BMXFLG="M" Q
61 .S BMXFLG=""
62 ;
63 ;---> If no Maximum Number provided, set it to 200.
64 I '$G(BMXMX) S BMXMX=200
65 ;
66 ;---> Define index and screen.
67 S:'$D(BMXIX) BMXIX=""
68 S:'$D(BMXSCR) BMXSCR=""
69 ;
70 ;---> Set Target Global for output and errors.
71 S BMXG="^BMXTMP($J)"
72 ;
73 ;---> If Mixed Case not set, set to No Change.
74 I '$D(BMXMC) S BMXMC=0
75 ;
76 ;---> Silent Fileman call.
77 D
78 .I $G(BMXIN)="" D Q
79 ..D LIST^DIC(BMXFL,,BMXFLDS,,BMXMX,0,,BMXIX,BMXSCR,,BMXG,BMXG)
80 .D FIND^DIC(BMXFL,,BMXFLDS,BMXFLG,BMXIN,BMXMX,BMXIX,BMXSCR,,BMXG,BMXG)
81 ;
82 D WRITE
83 Q
84 ;
85 ;
86 ;----------
87WRITE ;EP
88 ;---> Collect data for matching records and write in result global.
89 ;
90 ;---> First, check for errors.
91 ;---> If errors exist, write them and quit.
92 N I,N,X
93 I $D(^BMXTMP($J,"DIERR")) I $O(^("DIERR",0)) D Q
94 .S N=0,X=""
95 .F S N=$O(^BMXTMP($J,"DIERR",N)) Q:'N D
96 ..N M S M=0
97 ..F S M=$O(^BMXTMP($J,"DIERR",N,"TEXT",M)) Q:'M D
98 ...S X=X_^BMXTMP($J,"DIERR",N,"TEXT",M)_" "
99 .D ERROUT(X,1)
100 ;
101 ;
102 ;---> Write Field Names
103 S $P(ASDX,"^",1)="IEN"
104 F ASDC=1:1:$L(BMXFLDS,";") D
105 . S ASDXFNUM=$P(BMXFLDS,";",ASDC)
106 . S ASDXFNAM=$P(^DD(BMXFL,ASDXFNUM,0),"^")
107 . S:ASDXFNAM="" ASDXFNAM="UNKNOWN"_ASDC
108 . S $P(ASDX,"^",ASDC+1)=ASDXFNAM
109 S ^BMXTEMP($J,1)=ASDX_$C(30)
110 ;---> Write valid results.
111 ;---> Loop through the IEN node (...2,N) of the temp global.
112 N I,N,X S N=0
113 F I=2:1 S N=$O(^BMXTMP($J,"DILIST",2,N)) Q:'N D
114 .;---> Always set first piece of X=IEN of entry.
115 .S X=^BMXTMP($J,"DILIST",2,N)
116 .;
117 .;---> Collect other fields and concatenate to X.
118 .N M S M=0
119 .F S M=$O(^BMXTMP($J,"DILIST","ID",N,M)) Q:'M D
120 ..S X=X_U_^BMXTMP($J,"DILIST","ID",N,M)
121 .;
122 .;---> Convert data to mixed case if BMXMC=1.
123 .S:BMXMC X=$$T^BMXTRS(X)
124 .;
125 .;---> Set data in result global.
126 .S ^BMXTEMP($J,I)=X_$C(30)
127 ;
128 ;---> If no results, report it as an error.
129 D:'$O(^BMXTEMP($J,0))
130 .I BMXIN]"" S BMXERR="No entry matches """_BMXIN_"""." Q
131 .S BMXERR="Either the lookup file is empty"
132 .S BMXERR=BMXERR_" or all entries are screened (software error)."
133 ;
134 ;---> Tack on Error Delimiter and any error.
135 S ^BMXTEMP($J,I)=BMX31_BMXERR
136 Q
137 ;
138 ;
139 ;----------
140ERROUT(BMXERR,I) ;EP
141 ;---> Save next line for Error Code File if ever used.
142 ;---> If necessary, use I>1 to avoid overwriting valid data.
143 S:'$G(I) I=1
144 S ^BMXTEMP($J,I)=BMX31_BMXERR
145 Q
146 ;
147 ;
148PASSERR(BMXGBL,BMXERR) ;EP
149 ;---> If the RPC routine calling the BMX Generic Lookup above
150 ;---> detects a specific error prior to the call and wants to pass
151 ;---> that error in the result global rather than a generic error,
152 ;---> then a call to this function (PASSERR) can be made.
153 ;---> This call will store the error text passed in the result global.
154 ;---> The calling routine should then quit (abort its call to the
155 ;---> BMX Generic Lookup function above).
156 ;
157 ;---> Parameters:
158 ; 1 - BMXGBL (ret) Name of result global for Broker.
159 ; 2 - BMXERR (req) Text of error to be stored in result global.
160 ;
161 S:$G(BMXERR)="" BMXERR="Error not passed (software error)."
162 ;
163 N BMX31 S BMX31=$C(31)_$C(31)
164 K ^BMXTMP($J),^BMXTEMP($J)
165 S BMXGBL="^BMXTEMP("_$J_")"
166 S ^BMXTEMP($J,1)=BMX31_BMXERR
167 Q
Note: See TracBrowser for help on using the repository browser.