source: FOIAVistA/trunk/r/HEALTH_LEVEL_SEVEN-HL/HLOQUE.m@ 1742

HLOQUE ;ALB/CJM- HL7 QUEUE MANAGEMENT - 10/4/94 1pm ;07/31/2007
 ;;1.6;HEALTH LEVEL SEVEN;**126,132,134,137**;Oct 13, 1995;Build 21
 ;Per VHA Directive 2004-038, this routine should not be modified.
 ;
INQUE(FROM,QNAME,IEN778,ACTION,PURGE) ;
 ;Will place the message=IEN778 on the IN queue, incoming
 ;Input:
 ;  FROM - sending facility from message header.
 ;         For actions other than incoming messages, its the specified link.
 ;  QNAME - queue named by the application
 ;  IEN778 = ien of the message in file 778
 ;  ACTION - <tag^routine> that should be executed for the application
 ;  PURGE (optional) - PURGE=1 indicates that the purge dt/tm needs to be set by the infiler
 ;     If PURGE("ACKTOIEN") is set, it indicates that the purge dt/tm of
 ;     the original message to this application ack also needs to be set.
 ;Output: none
 ;
 I $G(FROM)="" S FROM="UNKNOWN"
 I '$L($G(QNAME)) S QNAME="DEFAULT"
 S ^HLB("QUEUE","IN",FROM,QNAME,IEN778)=ACTION_"^"_$G(PURGE)_"^"_$G(PURGE("ACKTOIEN"))
 I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT","IN",FROM,QNAME)))
 Q
 ;
OUTQUE(LINKNAME,PORT,QNAME,IEN778) ;
 ;Will place the message=IEN778 on the out-going queue
 ;Input:
 ;  LINKNAME = name of (.01) the logical link
 ;  PORT (optional) the port to connect to
 ;  QNAME - queue named by the application
 ;  IEN778 = ien of the message in file 778
 ;Output: none
 ;
 N SUB
 S SUB=LINKNAME
 I PORT S SUB=SUB_":"_PORT
 I '$L($G(QNAME)) S QNAME="DEFAULT"
 S ^HLB("QUEUE","OUT",SUB,QNAME,IEN778)=""
 I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT","OUT",SUB,QNAME)))
 Q
 ;
DEQUE(FROMORTO,QNAME,DIR,IEN778) ;
 ;This routine will remove the message=IEN778 from its queue
 ;Input:
 ;  DIR = "IN" or "OUT", denoting the direction that the message is going in
 ;  FROMORTO = for outgoing: the .01 field of the logical link
 ;         for incoming: sending facility
 ;  IEN778 = ien of the message in file 778
 ;Output: none
 ;
 Q:(FROMORTO="")
 I ($G(QNAME)="") S QNAME="DEFAULT"
 D
 .I $E(DIR)="I" S DIR="IN" Q
 .I $E(DIR)="O" S DIR="OUT" Q
 I DIR'="IN",DIR'="OUT" Q
 Q:'$G(IEN778)
 D:$D(^HLB("QUEUE",DIR,FROMORTO,QNAME,IEN778))
 .K ^HLB("QUEUE",DIR,FROMORTO,QNAME,IEN778)
 .;don't let the count become negative
 .I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT",DIR,FROMORTO,QNAME)),-1)<0,$$INC^HLOSITE($NA(^HLC("QUEUECOUNT",DIR,FROMORTO,QNAME)))
 Q
 ;
STOPQUE(DIR,QUEUE) ;
 ;This API is used to set a stop flag on a named queue.
 ;DIR=<"IN" or "OUT">
 ;QUEUE - the name of the queue to be stopped
 ;
 Q:$G(DIR)=""
 Q:$G(QUEUE)=""
 S ^HLTMP("STOPPED QUEUES",DIR,QUEUE)=1
 Q
STARTQUE(DIR,QUEUE) ;
 ;This API is used to REMOVE the stop flag on a named queue.
 ;DIR=<"IN" or "OUT">
 ;QUEUE - the name of the queue to be stopped
 ;
 Q:$G(DIR)=""
 Q:$G(QUEUE)=""
 K ^HLTMP("STOPPED QUEUES",DIR,QUEUE)
 Q
STOPPED(DIR,QUEUE) ;
 ;This API is used to DETERMINE if the stop flag on a named queue is set.
 ;Input:
 ;  DIR=<"IN" or "OUT">
 ;  QUEUE - the name of the queue to be checked
 ;Output:
 ;  Function returns 1 if the queue is stopped, 0 otherwise
 Q:$G(DIR)="" 0
 Q:$G(QUEUE)="" 0
 I $G(^HLTMP("STOPPED QUEUES",DIR,QUEUE)) Q 1
 Q 0
 ;
SQUE(SQUE,LINKNAME,PORT,QNAME,IEN778) ;
 ;Will place the message=IEN778 on the sequencing queue. This is always done in the context of the application calling an HLO API to send a message.
 ;Input:
 ;  SQUE - name of the sequencing queue
 ;  LINKNAME = name of (.01) the logical link
 ;  PORT (optional) the port to connect to
 ;  QNAME (optional) outgoing queue
 ;  IEN778 = ien of the message in file 778
 ;Output: 1 if placed on the outgoing queue, 0 if placed on the sequence queue
 ;
 N NEXT,MOVED
 S MOVED=0
 ;
 ;keep a count of messages pending on sequence queues for the HLO System Monitor
 I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT","SEQUENCE")))
 ;
 L +^HLB("QUEUE","SEQUENCE",SQUE):200
 ;
 S NEXT=+$G(^HLB("QUEUE","SEQUENCE",SQUE))
 Q:NEXT=IEN778 0  ;already queued!
 ;if the sequence queue is empty and not waiting on a message, then the message can be put directly on the outgoing queue, bypassing the sequence queue
 I '$O(^HLB("QUEUE","SEQUENCE",SQUE,0)),'NEXT D
 .S ^HLB("QUEUE","SEQUENCE",SQUE)=IEN778 ;to mean something moved to outgoing but not yet transmitted
 .L -^HLB("QUEUE","SEQUENCE",SQUE)
 .D OUTQUE(.LINKNAME,.PORT,.QNAME,IEN778)
 .S MOVED=1
 E  D
 .;Put the message on the sequence queue.
 .S ^HLB("QUEUE","SEQUENCE",SQUE,IEN778)=""
 .L -^HLB("QUEUE","SEQUENCE",SQUE)
 Q MOVED
 ;
ADVANCE(SQUE,MSGIEN) ;
 ;Will move the specified sequencing queue to the next message. 
 ;Input:
 ;  SQUE - name of the sequencing queue
 ;  MSGIEN - the ien of the message upon which the sequence queue was waiting.  If it is NOT the correct ien, then the sequence queue will NOT be advance.
 ;Output:
 ;  Function - 1 if advanced, 0 if not
 ;
 N NODE,IEN778,LINKNAME,PORT,QNAME
 Q:'$L($G(SQUE)) 0
 Q:'$G(MSGIEN) 0
 L +^HLB("QUEUE","SEQUENCE",SQUE):200
 ;
 ;do not advance if the queue wasn't pending the message=MSGIEN
 I (MSGIEN'=$P($G(^HLB("QUEUE","SEQUENCE",SQUE)),"^")) L -^HLB("QUEUE","SEQUENCE",SQUE) Q 0
 ;
 I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT","SEQUENCE")),-1)<0,$$INC^HLOSITE($NA(^HLC("QUEUECOUNT","SEQUENCE"))) ;decrement the count of messages pending sequence queues
 ;
 S IEN778=0
 ;look for the first message on the sequence que.  Make sure its valid, if not remove the invalid entry and keep looking.
 F  S IEN778=$O(^HLB("QUEUE","SEQUENCE",SQUE,0)) Q:'IEN778  S NODE=$G(^HLB(IEN778,0)) Q:$L(NODE)  D
 .;message does not exist! Remove from queue and try again.
 .K ^HLB("QUEUE","SEQUENCE",SQUE,IEN778)
 .I $$INC^HLOSITE($NA(^HLC("QUEUECOUNT","SEQUENCE")),-1)<0,$$INC^HLOSITE($NA(^HLC("QUEUECOUNT","SEQUENCE"))) ;decrement the count of messages pending sequence queues
 ;
 ;IEN778 is the next pending msg on this sequence queue
 I IEN778 D
 .;
 .;parse out info needed to move to outgoing queue
 .S LINKNAME=$P(NODE,"^",5),PORT=$P(NODE,"^",8),QNAME=$P(NODE,"^",6)
 .;
 .S ^HLB("QUEUE","SEQUENCE",SQUE)=IEN778 ;indicates this sequence queue is now waiting for msg=IEN778 before advancing.  The second pieces is the timer, but will not be set until the message=IEN778 is actually transmitted.
 .K ^HLB("QUEUE","SEQUENCE",SQUE,IEN778) ;remove from sequence queue
 .L -^HLB("QUEUE","SEQUENCE",SQUE)
 .S $P(^HLB(IEN778,5),"^",2)=1
 .D OUTQUE(.LINKNAME,$G(PORT),$G(QNAME),IEN778) ;move to outgoing queue
 E  D
 .K ^HLB("QUEUE","SEQUENCE",SQUE) ;this sequence queue is currently empty and not needed
 .L -^HLB("QUEUE","SEQUENCE",SQUE)
 Q 1
 ;
SEQCHK(WORK) ;functions under the HLO Process Manager
 ;check sequence queues for timeout
 N QUE,NOW
 S NOW=$$NOW^XLFDT
 S QUE=""
 F  S QUE=$O(^HLB("QUEUE","SEQUENCE",QUE)) Q:QUE=""  D
 .N NODE,MSGIEN,ACTION,NODE
 .S NODE=$G(^HLB("QUEUE","SEQUENCE",QUE))
 .Q:'$P(NODE,"^",2)
 .Q:$P(NODE,"^",2)>NOW
 .Q:$P(NODE,"^",3)
 .L +^HLB("QUEUE","SEQUENCE",QUE):2
 .;don't report if a lock wasn't obtained
 .Q:'$T
 .S NODE=$G(^HLB("QUEUE","SEQUENCE",QUE))
 .I '$P(NODE,"^",2) L -^HLB("QUEUE","SEQUENCE",QUE) Q
 .I ($P(NODE,"^",2)>NOW) L -^HLB("QUEUE","SEQUENCE",QUE) Q
 .I $P(NODE,"^",3) L -^HLB("QUEUE","SEQUENCE",QUE) Q  ;exception already raised
 .S MSGIEN=$P(NODE,"^")
 .I 'MSGIEN L -^HLB("QUEUE","SEQUENCE",QUE) Q
 .S ACTION=$$EXCEPT^HLOAPP($$GETSAP^HLOCLNT2(MSGIEN))
 .S $P(^HLB(MSGIEN,5),"^",3)=1
 .S $P(^HLB("QUEUE","SEQUENCE",QUE),"^",3)=1 ;indicates exception raised
 .L -^HLB("QUEUE","SEQUENCE",QUE)
 .D  ;call the application to take action
 ..N HLMSGIEN,MCODE,DUZ,QUE,NOW
 ..N $ETRAP,$ESTACK S $ETRAP="G ERROR^HLOQUE"
 ..S HLMSGIEN=MSGIEN
 ..S MCODE="D "_ACTION
 ..N MSGIEN,X
 ..D DUZ^XUP(.5)
 ..X MCODE
 ..;kill the apps variables
 ..D
 ...N ZTSK
 ...D KILL^XUSCLEAN
 Q
ERROR ;error trap for application context
 S $ETRAP="D UNWIND^%ZTER"
 D ^%ZTER
 S $ECODE=",UAPPLICATION ERROR,"
 ;
 ;kill the apps variables
 D
 .N ZTSK,MSGIEN,QUEUE
 .D KILL^XUSCLEAN
 ;
 ;release all the locks the app may have set, except Taskman lock
 L:$D(ZTSK) ^%ZTSCH("TASK",ZTSK):1
 L:'$D(ZTSK)
 ;reset HLO's lock
 L +^HLTMP("HL7 RUNNING PROCESSES",$J):0
 ;return to processing the next message on the queue
 D UNWIND^%ZTER
 Q