source: FOIAVistA/trunk/r/IFCAP-PRC-PRX--PRCA--PRCN/PRCVREA.m@ 1783

PRCVREA ;WOIFO/VC-Transmit HL7 message to IFCAP for RIL(cont);11/24/03 ; 4/26/05 2:42pm
 ;;5.1;IFCAP;**81**;Oct 20, 2000
 ;Per VHA Directive 10-93-142, this routine should not be modified
 ;
CALLIT ;Call the IFCAP RIL build Routine
 ;
 D EN^PRCVRC1(PRCSUB)
 ;
SETUP S PRCHD(1)=""
 S PRCHD(2)="ORC"_PRCCS_PRCCS_3
 S PRCHD(2,"T")="FUND CONTROL POINT"
 S PRCHD(3)="ORC"_PRCCS_PRCCS_17
 S PRCHD(3,"T")="COST CENTER"
 S PRCHD(4)=""
 S PRCHD(5)="ORC"_PRCCS_PRCCS_21
 S PRCHD(5,"T")="SITE NUMBER"
 S PRCHD(6)=""
 S PRCHD(7)="ORC"_PRCCS_PRCCS_10
 S PRCHD(7,"T")="DUZ"
 S PRCHD(8)="ORC"_PRCCS_PRCCS_10
 S PRCHD(8,"T")="LAST NAME"
 S PRCHD(9)="ORC"_PRCCS_PRCCS_11
 S PRCHD(9,"T")="FIRST NAME"
 S PRCDET(1)="RQD"_PRCCS_PRCCS_3
 S PRCDET(1,"T")="ITEM NUMBER"
 S PRCDET(2)="RQD"_PRCCS_PRCCS_5
 S PRCDET(2,"T")="QUANTITY"
 S PRCDET(3)="RQ1"_PRCCS_PRCCS_4
 S PRCDET(3,"T")="VENDOR ID"
 S PRCDET(4)="RQ1"_PRCCS_PRCCS_1
 S PRCDET(4,"T")="UNIT COST"
 S PRCDET(5)="RQD"_PRCCS_PRCCS_10
 S PRCDET(5,"T")="DATE NEEDED"
 S PRCDET(6)="RQD"_PRCCS_PRCCS_2
 S PRCDET(6,"T")="DYNAMED DOCUMENT ID"
 S PRCDET(7)="RQ1"_PRCCS_PRCCS_5
 S PRCDET(7,"T")="NIF NUMBER"
 S PRCDET(8)="RQ1"_PRCCS_PRCCS_3
 S PRCDET(8,"T")="BOC"
 ;Check if IFCAP has returned any errors
 ;
 S ERRCNT=1
 S PRCVERR(0)="0"
HEAD ;If there are errors in the "1" sub-segment, add all errors to all
 ;   line items
 S ERRCNT=1,MSGFLG=0,PRCSUB2=$P(PRCSUB,"*",2)
 I $D(^XTMP(PRCSUB,1,"ERR"))>0 D
 .S II=0
 .F I=1:1 S II=$O(^XTMP(PRCSUB,1,"ERR",II)) Q:II=""  D
 ..S ERRDAT=$G(^XTMP(PRCSUB,1,"ERR",II))
 ..Q:ERRDAT=""
 ..S MSGFLG=1
 ..S FLDNO=$P(ERRDAT,U,1),ERRCOD="PRCV"_$P(ERRDAT,U,2),ERRTXT=$P(ERRDAT,U,3)
 ..S SEVER=$P(ERRDAT,U,4)
 ..S ERRSTR="ERR"_PRCFS_PRCFS_PRCHD(FLDNO)_PRCFS_"207"_PRCCS_"Application internal error"_PRCCS_"HL70357"_PRCFS_SEVER_PRCFS_ERRCOD_PRCCS_ERRTXT_PRCFS
 ..S PRCVERR(ERRCNT)="Error in Requisition Header for "_PRCHD(FLDNO,"T")_" from HL7 MESSAGE "_PRCSUB2_" "_ERRCOD_" "_ERRTXT,ERRCNT=ERRCNT+1
 ..S J=0
 ..F IL=1:1 S J=$O(^XTMP(PRCSUB,2,J)) Q:J=""  D
 ...S ERRSUB=$P(ERRSTR,PRCFS,3)
 ...S $P(ERRSUB,U,2)=J
 ...S $P(ERRSTR,PRCFS,3)=ERRSUB
 ...;S $P($P(ERRSTR,PRCFS,3),U,2)=J
 ...S $P(ERRSTR,PRCFS,7)=$P($G(^XTMP(PRCSUB,2,J)),U,6)
 ...S ^TMP("PRCVRIL",$J,"NAK",ACKCNT)=ERRSTR,ACKCNT=ACKCNT+1
DETAIL ;If there are errors in the detail lines, add them
 S II=0
 F I=1:1 S II=$O(^XTMP(PRCSUB,2,II)) Q:II=""  D
 .S DOCID=$P(^XTMP(PRCSUB,2,II),U,6)
 .S III=0
 .F J=1:1 S III=$O(^XTMP(PRCSUB,2,II,"ERR",III)) Q:III=""  D
 ..S ERRDAT=$G(^XTMP(PRCSUB,2,II,"ERR",III))
 ..Q:ERRDAT=""
 ..S MSGFLG=1
 ..S FLDNO=$P(ERRDAT,U,1),ERRCOD="PRCV"_$P(ERRDAT,U,2),ERRTXT=$P(ERRDAT,U,3)
 ..S ERRLOC=PRCDET(FLDNO),$P(ERRLOC,U,2)=II
 ..S SEVER=$P(ERRDAT,U,4)
 ..S ERRSTR="ERR"_PRCFS_PRCFS_ERRLOC_PRCFS_"207"_PRCCS_"Application internal error"_PRCCS_"HL70357"_PRCFS_SEVER_PRCFS_ERRCOD_PRCCS_ERRTXT_PRCFS_DOCID
 ..S ^TMP("PRCVRIL",$J,"NAK",ACKCNT)=ERRSTR,ACKCNT=ACKCNT+1
 ..S PRCVERR(ERRCNT)="Error in detail for Message Control ID "_PRCSUB2_". Field in error - "_PRCDET(FLDNO,"T")_". "_ERRTXT_" DynaMed Doc ID "_DOCID
 ..S ERRCNT=ERRCNT+1
 ;
 I MSGFLG=0 D ACKIT,CLEANUP^PRCVRE1 Q
SETNTE ; If there are errors set an NTE segment
 ;
 S TOT=0,TOTREC=0,TOTERR=0
 F I=1:1 S TOT=$O(^XTMP(PRCSUB,2,TOT)) Q:TOT=""  D
 .S TOTREC=TOT
 .I $D(^XTMP(PRCSUB,2,TOT,"ERR"))>0 D
 ..S ERRS=0
 ..F J=1:1 S ERRS=$O(^XTMP(PRCSUB,2,TOT,"ERR",ERRS)) Q:ERRS=""  D
 ...S SEVER=$P($G(^XTMP(PRCSUB,2,TOT,"ERR",ERRS)),U,4)
 ...I SEVER'="W" S TOTERR=TOTERR+1,ERRS=99
 I $D(^XTMP(PRCSUB,2,"ERR",1))>1 S TOTERR=TOTREC
 S TOTGOOD=TOTREC-TOTERR
 S ^TMP("PRCVRIL",$J,"NAK",ACKCNT)="NTE"_PRCFS_PRCFS_PRCFS_TOTREC_"-"_TOTERR_"-"_TOTGOOD,ACKCNT=ACKCNT+1
 D NAKIT,CLEANUP^PRCVRE1 Q
 ;
NAKIT ;Send an acknowledgement that the message is rejected
 ;
 I HL("APAT")'="AL" Q
 S MSG=""
 F I=1:1 S MSG=$O(^TMP("PRCVRIL",$J,"NAK",MSG)) Q:MSG=""  D
 .S ^TMP("HLA",$J,I)=^TMP("PRCVRIL",$J,"NAK",MSG)
 S PRCVRES=""
 D GENACK^HLMA1(HL("EID"),HLMTIENS,HL("EIDS"),"GM",1,.PRCVRES)
 ;I +$P(PRCVRES,U,2) D
 ;.S PRCVERR(ERRCNT)="Application ACK not processed. Contact EVS."
MAIL ;Send MailMan message with error
 Q:LENVAL="NOTOK"
 N XMDUZ,XMMG,XMSUB,XMTEXT,XMY,XMZ
 S XMSUB="RIL build errors in HL7 message "_HL("MID")_" "
 S XMDUZ="IFCAP/DynaMed Interface"
 S XMTEXT="PRCVERR("
 D GETFCPU^PRCVLIC(.XMY,PRCSITE,PRCFCP)
 D ^XMD
 K XMDUZ,XMMG,XMSUB,XMTEXT,XMY,XMZ
 Q
 ;
ACKIT ;Send an acknowledgement that everything went fine
 ;
 I HL("APAT")'="AL" Q
 F I=1:1:1 S ^TMP("HLA",$J,I)=$G(^TMP("PRCVRIL",$J,"ACK",I))
 ;
 D GENACK^HLMA1(HL("EID"),HLMTIENS,HL("EIDS"),"GM",1,.PRCVRES)
 ;I +P(PRCVRES,U,2) D
 ;.I $D(ERRCNT)=0 S ERRCNT=1
 ;.S PRCVERR(ERRCNT)="Application ACK not processed. Contact EVS."
 ;.D MAIL
 Q