source: FOIAVistA/trunk/r/INCOME_VERIFICATION_MATCH-IVM/IVM16PF.m@ 1009

Last change on this file since 1009 was 628, checked in by George Lilly, 15 years ago

initial load of FOIAVistA 6/30/08 version
File size: 6.1 KB
Line 
1IVM16PF ;HEC/KSD - Patch Pre-Install rtn functions IVM*2*34;01.23.2001 ; 9/20/01 4:16pm
2 ;;2.0;INCOME VERIFICATION;**34**;01.23.2001
3 ;
4 Q ; NO DIRECT ACCESS - CALL FUNCTION
5 ;
6LL16(LLNAME,LLPTYP,DEVTYP,QSIZE,TCPADDR,TCPPORT,TCPSTYP,PERSIST,STNODE) ;
7 ;INPUT LLNAME = Logical Link Name (ex. "LL HEC 500")
8 ; LLPTYP = LLP Type (ex. "TCP")
9 ; DEVTYP = Device Type - Systems Monitor - display ONLY
10 ; QSIZE = Queue Size
11 ; TCPADDR = TCP/IP Address
12 ; TCPPORT = TCP/IP Port #
13 ; TCPSTYP = TCP/IP Service Type
14 ; C - Client (Sender)
15 ; S - Single Listener
16 ; M - Multi Listener
17 ; PERSIST = Is connection persistent Y or N
18 ; STNODE = Startup Node - TaskMan Node to start on
19 ;
20 ;OUTPUT IEN of entry (#870) Success
21 ; -1^Error Message Error
22 ;
23 ;PURPOSE Create a Logical Link for TCP/IP transmissions.
24 ;
25 N FILE,DATA,RETURN,DEFINED,ERROR,DA,DGENDA
26 S FILE=870
27 ; If already exists then skip
28 ;
29 Q:+$O(^HLCS(870,"B",LLNAME,0))>0 ""
30 ;
31 ; set v1.6 field values
32 S DATA(.01)=LLNAME ;LOGICAL LINK NAME
33 S DATA(2)=$O(^HLCS(869.1,"B",LLPTYP,0)) ;LLP TYPE
34 S DATA(3)=DEVTYP ;QUEUE TYPE
35 S DATA(4.5)=1 ;AUTOSTART
36 S DATA(21)=QSIZE ;QUEUE SIZE
37 D:TCPSTYP="C" ;IF CLIENT(SENDER)
38 . S DATA(200.02)=3 ;RE-TRANSMISSION ATTEMPTS
39 . S DATA(200.021)="R" ;EXCEED RE-TRANSMISSION
40 . S DATA(200.04)=90 ;READ TIMEOUT
41 . S DATA(200.05)=270 ;ACK TIMEOUT
42 S DATA(400.01)=TCPADDR ;TCP/IP ADDRESS
43 S DATA(400.02)=TCPPORT ;TCP/IP PORT
44 S DATA(400.03)=TCPSTYP ;TCP/IP SERVICE TYPE
45 S DATA(400.04)=PERSIST ;PERSISTENT
46 S DATA(400.06)=STNODE ;STARTUP NODE
47 ;
48 S RETURN=$$ADD^DGENDBS(FILE,"",.DATA,.ERROR)
49 S:ERROR'=""!(+RETURN=0) RETURN=-1_"^"_ERROR
50 ;
51 Q RETURN
52 ;
53APP(ANAME,STATUS,STATION,COUNTRY) ;
54 ;INPUT ANAME = Application Name (ex. "HEC 500")
55 ; STATUS = "a"CTIVE or "i"INACTIVE
56 ; STATION = STATION # (ex. 500)
57 ; COUNTRY = COUNTRY NAME (ex. "USA")
58 ;
59 ;OUTPUT IEN of entry (#771) Success
60 ; -1^Error Message Error
61 ;
62 ;PURPOSE Create an Application
63 ;
64 N DATA,FILE,RETURN,ERROR,DA
65 S FILE=771
66 ; If already exists then skip
67 ;
68 Q:+$O(^HL(771,"B",ANAME,0))>0 ""
69 S DATA(.01)=ANAME
70 S DATA(2)=STATUS
71 S DATA(3)=STATION
72 S DATA(7)=$O(^HL(779.004,"B",COUNTRY,0))
73 S RETURN=$$ADD^DGENDBS(FILE,"",.DATA,.ERROR)
74 S:ERROR'=""!(+RETURN=0) RETURN=-1_"^"_ERROR
75 Q RETURN
76 ;
77SP(PNAME,LL,RECVAPP,RMSGTYP,REVTTYP,MSGPRTN) ;
78 ;INPUT PNAME = Protocol Name
79 ; LL = Logical Link Name (ex. "LL VAMC 500")
80 ; RECVAPP = Receiving Application Name (ex. "VAMC 500")
81 ; RMSGTYP = Response Message Type (ex. "ACK")
82 ; REVTTYP = Response Event Type. Usually empty, used more
83 ; in response to a Query with an ORF message.
84 ; MSGPRTN = Message Processing Routine - Routine to parse
85 ; regular transmission of data - MUMPS format
86 ; (ex. "D ^IVMBORU")
87 ;
88 ;OUTPUT IEN entry (#101) for Subscriber Protocol Success
89 ; -1^Error Message
90 ;
91 ;PURPOSE Create a Subscriber Protocol
92 ;
93 N DATA,FILE,RETURN,ERROR,DA,DGENDA
94 S FILE=101
95 ; If already exists then skip
96 ;
97 Q:+$O(^ORD(101,"B",PNAME,0))>0 ""
98 S DATA(.01)=PNAME ;PROTOCOL NAME
99 S DATA(4)="S" ;PROTOCOL TYPE
100 S DATA(770.11)=$O(^HL(771.2,"B",RMSGTYP,0)) ;RESPONSE MSG TYPE
101 S DATA(770.2)=$O(^HL(771,"B",RECVAPP,0)) ;RECEIVING APP
102 S:REVTTYP]"" DATA(770.4)=$O(^HL(779.001,"B",REVTTYP,0)) ;EVENT TYPE
103 S DATA(770.7)=$O(^HLCS(870,"B",LL,0)) ;LOGICAL LINK
104 S DATA(771)=MSGPRTN ;MSG PROCESSING RTN
105 S DATA(773.1)=1 ;SEND FACILITY REQUIRED
106 S DATA(773.2)=1 ;RECV FACILITY REQUIRED
107 S RETURN=$$ADD^DGENDBS(FILE,"",.DATA,.ERROR)
108 S:ERROR'=""!(+RETURN=0) RETURN=-1_"^"_ERROR
109 Q RETURN
110 ;
111EDP(PNAME,MTYP,ETYP,VER,SENDAPP,ACKPRTN,SUBIEN,DTXT,ITEMTXT) ;
112 ;INPUT PNAME = Protocol Name
113 ; MTYP = Message Type Name (ex. "ORU")
114 ; ETYP = Event Type Name (ex. "Z11")
115 ; VER = HL7 Version # (ex. 2.1)
116 ; SENDAPP = Sending Application Name (ex. "HEC 500")
117 ; ACKPRTN = Acknowledgement Processing Routine -
118 ; Routine to parse an ACK transmission -
119 ; MUMPs format (ex. "D ^IVMBACK")
120 ; SUBIEN = IEN of Subscriber Protocol in ^ORD(101)
121 ; DTXT = Disable Text
122 ; ITEMTXT = Item Text
123 ;
124 ;OUTPUT IEN entry (#101) of Event Driver Protocol Success
125 ; -1^Error Message Error
126 ;
127 ;PURPOSE Create an Event Driver Protocol and the Sub-File to
128 ; contain pointers to the Subscriber Protocol file
129 ;
130 N DATA,FILE,DGENDA,RETURN,ERROR,DA
131 S FILE=101
132 ; If already exists then skip
133 ;
134 Q:+$O(^ORD(101,"B",PNAME,0))>0 ""
135 S DATA(.01)=PNAME ;PROTOCOL NAME
136 S DATA(1)=ITEMTXT ;ITEM TEXT
137 S DATA(2)=DTXT ;DISABLE TEXT
138 S DATA(4)="E" ;PROTOCOL TYPE
139 S DATA(770.1)=$O(^HL(771,"B",SENDAPP,0)) ;SENDING APP
140 S DATA(770.3)=$O(^HL(771.2,"B",MTYP,0)) ;MSG TYPE
141 S DATA(770.4)=$O(^HL(779.001,"B",ETYP,0)) ;EVENT TYPE
142 S DATA(770.8)=$O(^HL(779.003,"B","AL",0)) ;ACCEPT ACK CODE
143 S DATA(770.9)=$O(^HL(779.003,"B","AL",0)) ;APPLICATION ACK TYPE
144 S DATA(770.95)=$O(^HL(771.5,"B",VER,0)) ;VERSION ID
145 S DATA(772)=ACKPRTN ;ACK PROCESSING RTN
146 S RETURN=$$ADD^DGENDBS(FILE,"",.DATA,.ERROR)
147 I ERROR'=""!(+RETURN=0) S RETURN=-1_"^"_ERROR G EDPEXIT
148 S DGENDA(1)=RETURN
149 ;
150 ; ADD SUBSCRIBER SUB-FILE TO EVENT DRIVER PROTOCOL
151 S FILE=101.0775
152 K DATA
153 S DATA(.01)=SUBIEN
154 S RETURN=$$ADD^DGENDBS(FILE,.DGENDA,.DATA,.ERROR)
155 S:ERROR'=""!(+RETURN=0) RETURN=-1_"^"_ERROR
156 ;
157EDPEXIT Q RETURN
158 ;
Note: See TracBrowser for help on using the repository browser.