source: FOIAVistA/trunk/r/PATIENT_REPRESENTATIVE-QAC/QACI1.m@ 1203

Last change on this file since 1203 was 628, checked in by George Lilly, 15 years ago

initial load of FOIAVistA 6/30/08 version

File size: 4.7 KB
Line 
1QACI1 ; OAKOIFO/TKW - DATA MIGRATION - AUTO-CLOSE ROCS ;4/25/05 16:51
2 ;;2.0;Patient Representative;**19**;07/25/1995;Build 55
3EN ; Auto-close open ROCs with a Date of Contact prior to user-selected date.
4 I $D(^XTMP("QACMIGR","ROC","U")) D
5 . W !!,"*** CAUTION! You have already moved some ROCs to the staging area. To migrate"
6 . W !,"any changes to these ROCs, you will need to run the option to move data to"
7 . W !,"the staging area again. ***" Q
8 I $D(^XTMP("QACMIGR","ROC","D")) D
9 . W !!,"*** You cannot auto-close ROCs that have already migrated into PATS ***" Q
10 I '$D(^XTMP("QACMIGR","ROC","E")) D Q
11 . W !!,"*** CAUTION! You have not yet run the option to generate the error report.",!," You must run it before auto-closing ROCs!" Q
12 N PATSCLDT,ROCIEN,ROC0,ROC2,ROCNO,CONVROC,CONDATE,INFOBY,ENTBY,STATION,TXT,EDITEBY,EDITIBY,EDITDIV,EDITITXT,EDITRTXT,PATSFDA,PATSIENS,DOTCNT,PATSCDT,CURRDT
13 N PATSCNT S PATSCNT=0
14 S CURRDT=$$DT^XLFDT()
15 S PATSCDT=$$FMTE^XLFDT(CURRDT)
16 S DOTCNT=0
17 ; Set default text to replace null issue text or null resolution text
18 S TXT(1)="This R.O.C. was auto-closed prior to migration to PATS"
19 ; Prompt them for auto-close date
20 S PATSCLDT=$$DEFDATE^QACI1A
21 W !!!,"You have asked to auto-close Open ROCs with a Date of Contact prior to",!,"the beginning of the previous quarter -- "_$$FMTE^XLFDT(PATSCLDT),!
22 D Q:Y'=1
23 . N DIR S DIR(0)="YO"
24 . S DIR("A")="Are you sure"
25 . S DIR("B")="YES"
26 . D ^DIR Q
27 W !,"."
28 ;
29 ; Initialize header for all migration data so Kernel will kill global in 30 days.
30 S $P(^XTMP("QACMIGR",0),"^",1,2)=$$FMADD^XLFDT(CURRDT,30)_"^"_CURRDT
31 ; Set a flag indicating that auto-close in in process
32 S $P(^XTMP("QACMIGR","AUTO","C"),"^",2)=1
33 ; Read through CONSUMER CONTACTS and auto-close ROCs.
34 F ROCIEN=0:0 S ROCIEN=$O(^QA(745.1,ROCIEN)) Q:'ROCIEN S ROC0=$G(^(ROCIEN,0)) D
35 . S DOTCNT=DOTCNT+1 I DOTCNT=500 W "." S DOTCNT=0
36 . ; Quit if ROC is already closed or if ROC number is null.
37 . Q:$P($G(^QA(745.1,ROCIEN,7)),"^",2)="C"
38 . S ROCNO=$P(ROC0,"^") Q:ROCNO=""
39 . S CONVROC=$$CONVROC^QACI2C(ROCNO)
40 . ; Quit is ROC has errors, or has been migrated.
41 . Q:$D(^XTMP("QACMIGR","ROC","E",ROCNO_" "))
42 . Q:$D(^XTMP("QACMIGR","ROC","D",CONVROC))
43 . ; Quit if date of contact is past the close date, or if it's null
44 . S CONDATE=$P(ROC0,"^",2) Q:CONDATE>PATSCLDT
45 . S CONDATE=$$FMTE^XLFDT(CONDATE,5)
46 . Q:CONDATE=""
47 . S ROC2=$G(^QA(745.1,ROCIEN,2))
48 . S (EDITEBY,EDITIBY,EDITDIV,EDITITXT,EDITRTXT)=0
49 . ;Extract and check DIVISION. Quit if station number is invalid.
50 . S STATION=+$P(ROC0,"^",16)
51 . I 'STATION S STATION=$$LKUP^XUAF4($P(ROCNO,".")),EDITDIV=1
52 . Q:$$STA^XUAF4(STATION)=""
53 . ;Extract info taken by and entered by--quit if both are null.
54 . S INFOBY=$P(ROC0,"^",6),ENTBY=$P(ROC0,"^",7)
55 . I ENTBY="" S ENTBY=INFOBY,EDITEBY=1
56 . I INFOBY="" S INFOBY=ENTBY,EDITIBY=1
57 . Q:INFOBY=""
58 . ;Make sure there is at least one issue code on the ROC, unless
59 . ; the date of contact is in or prior to FY 2003.
60 . S I=$O(^QA(745.1,ROCIEN,3,0)),X=$P($G(^QA(745.1,ROCIEN,3,+I,0)),"^"),X=$P($G(^QA(745.2,+X,0)),"^")
61 . I X="",$P(ROC0,"^",2)>3030930 Q
62 . ; Issue Text
63 . S TXT="" D
64 .. F I=0:0 S I=$O(^QA(745.1,ROCIEN,4,I)) Q:'I S TXT=$G(^(I,0)) Q:TXT]""
65 .. Q
66 . I TXT="" S EDITITXT=1
67 . ; Resolution Text
68 . S TXT="" D
69 .. F I=0:0 S I=$O(^QA(745.1,ROCIEN,6,I)) Q:'I S TXT=$G(^(I,0)) Q:TXT]""
70 .. Q
71 . I TXT="" S EDITRTXT=1
72 . ;
73 . ; Set status of ROC to Closed and update any missing required fields
74 . ; with their default values
75 . K ^TMP("DIERR",$J)
76 . K PATSFDA S PATSIENS=ROCIEN_","
77 . S PATSFDA(745.1,PATSIENS,27)="C"
78 . S PATSFDA(745.1,PATSIENS,26)=CURRDT
79 . I EDITEBY S PATSFDA(745.1,PATSIENS,9)=ENTBY
80 . I EDITIBY S PATSFDA(745.1,PATSIENS,8)=INFOBY
81 . I EDITDIV S PATSFDA(745.1,PATSIENS,37)=STATION
82 . D FILE^DIE("","PATSFDA")
83 . K PATSFDA
84 . I $D(^TMP("DIERR",$J)) D REOPEN Q
85 . ; Update Issue Text if necessary.
86 . I EDITITXT D WP^DIE(745.1,PATSIENS,22,"","TXT")
87 . I $D(^TMP("DIERR",$J)) D REOPEN Q
88 . ; Update Resolution Text if necessary.
89 . I EDITRTXT D WP^DIE(745.1,PATSIENS,25,"","TXT")
90 . I $D(^TMP("DIERR",$J)) D REOPEN Q
91 . ; Build a list of ROCs that were auto-closed.
92 . S ^XTMP("QACMIGR","AUTO","C",ROCNO_" ")=PATSCDT_"^"_EDITEBY_"^"_EDITIBY_"^"_EDITITXT_"^"_EDITRTXT_"^"_EDITDIV
93 . ; Update the count of ROCs that were autoclosed
94 . S PATSCNT=PATSCNT+1
95 . Q
96 W "Done."
97 ; Update count of ROCs autoclosed, set flag to indicate process is done.
98 S PATSCNT=$P(^XTMP("QACMIGR","AUTO","C"),"^")+PATSCNT D
99 . I PATSCNT=0 K ^XTMP("QACMIGR","AUTO","C") Q
100 . S ^XTMP("QACMIGR","AUTO","C")=PATSCNT_"^0" Q
101 ; Print report of ROCs auto-closed.
102 D ENRPT2^QACI1A
103 Q
104 ;
105REOPEN ; Re-open ROC if an error occurred during FileMan update
106 K PATSFDA,^TMP("DIERR",$J)
107 S PATSFDA(745.1,PATSIENS,27)="O"
108 D FILE^DIE("","PATSFDA")
109 K PATSFDA Q
110 ;
111 ;
Note: See TracBrowser for help on using the repository browser.