source: FOIAVistA/trunk/r/RADIOLOGY_NUCLEAR_MEDICINE-RA/RASTED.m@ 1582

Last change on this file since 1582 was 628, checked in by George Lilly, 15 years ago

initial load of FOIAVistA 6/30/08 version

File size: 8.0 KB
Line 
1RASTED ;HISC/CAH,FPT,GJC,SS AISC/TMP,TAC,RMO-Edits for status tracking ;6/2/98 15:43
2 ;;5.0;Radiology/Nuclear Medicine;**1,10,18,28,45,71,82**;Mar 16, 1998;Build 8
3 ;last modif by SS for P18 JUN 19,2000
4 ;02/10/2006 BAY/KAM RA*5*71 Add ability to update exam data to V/R
5 ; *** 'RASTED' is called from the routine; 'CASE^RASTEXT1'. ***
6 ;last modification by SS May 12,2000
7 S RAL=X F I2=1:1 S X=$P(RAL,",",I2) Q:X="" S RAVW="" W !!,"Case # being tracked: ",X D SEL^RACNLU D:'RACNT KEY D START:RACNT&((X'="^")&(X'=""))
8 K RAL,RAI,RAPRI,I2,I3,RAVW,RAEND,RANME,RAPRC,RARPT,RADTE,RADT0,RANEXT,RANXT72,RASK,RACN,RACN0,RADFN,RADUZ,RAPOP,RAST,RAST0,RAFL,RAFST,RAIX,RASSN,RACOMP,X Q
9 ;RACOMP defined if [RA STATUS CHANGE] was processed completely
10START F I3=1:1:11 S @$P("RADFN^RADTI^RACNI^RANME^RASSN^RADATE^RADTE^RACN^RAPRC^RARPT^RAST","^",I3)=$P(Y,"^",I3)
11 I '$D(^RA(72,+RAST,0)) W $C(7),"Invalid status for case #: ",RACN R X:3 Q
12 S RAST0=^RA(72,+RAST,0) I $P(RAST0,"^",3)=9 W $C(7),!,"Exam is already complete!!" R X:3 Q
13 S X1=""
14 I $D(^RA(72,+$P(RAST0,"^",2),0)) S RANEXT=^(0),RASK=$S($D(^(.2)):^(.2),1:""),RANXT72=+$P(RAST0,"^",2)
15NEXT I '$D(RANEXT) S DIC("A")="Enter Next Status: ",DIC="^RA(72,",DIC(0)="AEFQZ",DIC("S")="I $P(^(0),U,3),$P(^(0),U,7)=$O(^RA(79.2,""B"",RAIMGTY,0))" D ^DIC K DIC Q:Y'>0 S RANEXT=Y(0),RASK=$S($D(^RA(72,+Y,.2)):^(.2),1:""),RANXT72=+Y
16 I $P(RANEXT,"^")=$P(RAST0,"^") W $C(7),!,"Status has already been set to ",$P(RANEXT,"^") R X:3 Q
17 I $$LKUP^XPDKEY(+$P(RANEXT,"^",4))]"",'$D(^XUSEC($$LKUP^XPDKEY(+$P(RANEXT,"^",4)),DUZ)) W $C(7),!,"You are not authorized to change to this status" R X:3 Q
18 ; check if next status has order field filled in
19 G:$P(RANEXT,U,3)]"" OK2
20 N RANXTIEN,RALINE S RANXTIEN=$P(RAST0,U,2),$P(RALINE,"_",50)=""
21 W !!?15,$C(7),RALINE
22 W !!?15,$C(7),"Default Next Status (",$P(RANEXT,U),") is *NOT* active.",!?15,$C(7),RALINE,!
23NXT S RANXTIEN=$P(^RA(72,RANXTIEN,0),U,2)
24 G:$P($G(^RA(72,+RANXTIEN,0)),U,3)=9 OK0 ;next default status is COMPLETE
25 G:RANXTIEN="" BAD ;no next default status pointer
26 G:'$D(^RA(72,RANXTIEN,0)) BAD ;no next default status record
27 G:$P($G(^RA(72,RANXTIEN,0)),U,3)="" NXT ;no order data, so loop back
28 G OK0
29BAD W !?15,$C(7),RALINE
30 W !!?18,$C(7),"There is no valid higher status to advance to.",!?15,$C(7),RALINE
31KEY W !! K DIR S DIR(0)="E",DIR("A")="Press Return key to continue " D ^DIR
32 K DIR,DIRUT,DUOUT Q
33OK0 S RANEXT=$G(^RA(72,RANXTIEN,0)),RANXT72=RANXTIEN
34OK1 W !?15,$C(7),RALINE,!!?18,"Next valid status is : ",$P(RANEXT,U),!?15,$C(7),RALINE
35OK2 S RADT0=^RADPT(RADFN,"DT",RADTI,0),RACN0=^("P",RACNI,0),RACS=$P(RACN0,"^",24),RAPRIT=$P(RACN0,"^",2)
36CHANGE W !!,"Name: ",RANME,?40,"Case # : ",RACN,!,"Division : ",$S($D(^DIC(4,+$P(RADT0,"^",3),0)):$P(^(0),"^"),1:"")
37 W ?40,"Location: ",$S('$D(^RA(79.1,+$P(RADT0,"^",4),0)):"",$D(^SC(+^(0),0)):$P(^(0),"^"),1:"")
38 W !,"Procedure: ",RAPRC
39 D PRCCPT^RAPROD
40 W !," ***** Old Status: ",$P(RAST0,"^"),!," ***** New Status: ",$P(RANEXT,"^")
41 I RAPRC="Unknown" W !!?5,$C(7),"This record is corrupted -- the procedure is missing,",!?5,"please contact your ADPAC or IRM",! K DIR S DIR(0)="E",DIR("A")="Press RETURN to Continue" D ^DIR K DIR,DIROUT,DIRUT,DTOUT,DUOUT Q
42ASK R !,"Do you wish to continue? YES// ",X1:DTIME S:X1="" X1="Y" Q:'$T!(X1["^")!("nN"[X1)
43 I X1["?" W !!,"Answer 'Yes' or 'No'.",! G ASK
44 S RADUZ=DUZ I '$P(RAMDV,"^",6)!($P(RASK,"^",11)["Y") S RAPOP=0 D USER Q:RAPOP
45 N RAPRTSET,RAMEMARR D EN2^RAUTL20(.RAMEMARR) ;is this a print set ?
46 N RAWHICH,RAREM,RABEFORE,RAAFTER
47 S DIE("NO^")="BACKOUTOK",DR="[RA STATUS CHANGE]"
48 S DA=RADFN,RADADA=RADTI,DIE="^RADPT(",RADIE="^RADPT("_RADFN_",""DT"","
49 S RAXIT=$$LOCK^RAUTL12(RADIE,RADADA) Q:RAXIT
50 ;
51 ;save 'before' CM data value to compare against the possible 'after'
52 ;value
53 D TRK70CMB^RAMAINU(RADFN,RADTI,RACNI,.RATRKCMB) ;RA*5*45
54 ;
55 D SVBEFOR^RAO7XX(RADFN,RADTI,RACNI) ;P18 save before edit to compare later
56 K RACOMP D ^DIE
57 ;P18. $D(RABEFORE)=0 means that RASTREQ was not run - the user has interrupted input or timeout happened. So we must call it, then check result (is status changed) and if so - update 70.03 #3 and set RA70033=X
58 I '$D(RABEFORE) K DA S X=RANXT72 D:X ^RASTREQ I $D(X)#2 S RA70033=X D U70033^RADD3(RADFN,RADTI,RACNI,X)
59 ;
60 ;1) check data consistency between 'CONTRAST MEDIA USED' & 'CONTRAST
61 ;MEDIA'
62 ;2) check 'before' CM data against 'after' CM data, file in audit log
63 ;if necessary. Remember, contrast media asked when in input template:
64 ;RA EXAM EDIT (RA*5*45)
65 S RACMDA=RACNI,RACMDA(1)=RADTI,RACMDA(2)=RADFN
66 D XCMINTEG^RAMAINU1(.RACMDA) ;1
67 D TRK70CMA^RAMAINU(RADFN,RADTI,RACNI,RATRKCMB) ;2
68 K RACMDA,RAOPRC
69 ;
70 K DIE("NO^"),DQ,DE,RATRKCMB,RAZCM
71 K RANM702,RADIOPH,RADOSE,RAIEN702,RAHI,RALOW,RAPRI,RAMIS,RAI,RAPSDRUG,RAR1
72 ;
73 ; if EXAM STATUS didn't process, still go thru status-change-logic
74 ; variables
75 ; ---------
76 ; RA70033: is set in the RA STATUS CHANGE input template after the
77 ; update to the EXAMINATION STATUS field (70.03;3)
78 ; RATCXX: are technologist comments (if any) input by the user
79 ; RAMDV: division parameters, piece 10; store the date/time
80 ; of an exam status change (1 for yes, 0 for no)
81 ;
82 D:$D(RA70033)&($P(RAMDV,"^",10)) X7005^RADD3(RADFN,RADTI,RACNI,RAMDV,"",RA70033,$S($D(RADUZ):RADUZ,1:DUZ))
83 D A7007^RADD3(RADFN,RADTI,RACNI,$S($D(RADUZ):RADUZ,1:DUZ),$G(RATCXX))
84 D UNLOCK^RAUTL12(RADIE,RADADA) K RADADA,RADIE
85 K RA70033,RADUZ,RATCXX
86 N RACN0A ; updated version of the exam node after status updates
87 W !,"...Status ",$S($D(RAAFTER)&($G(RABEFORE)=$G(RAAFTER)):"unchanged",$G(RABEFORE)>$G(RAAFTER):"backed down",1:"successfully changed")," for case #: ",RACN
88 ;
89 ;02/10/2006 BAY/KAM RA*5*71 ,modified in RA*5*82...
90 I $D(RAAFTER),$G(RABEFORE)=$G(RAAFTER) R X:3 D Q ;exit if no change
91 .;Modified for RA*5*82
92 .N RAEXEDT S RAEXEDT=$$CMPAFTR^RAO7XX(1) ;;P18 compares if procedure was changed sends XX message
93 .D:RAEXEDT EXM^RAHLRPC ;P18 compares if procedure was changed sends XX message
94 ;
95 ; if status got backed down, RANEXT is re-defined inside rtn RASTREQ
96 ; when the above edit template gets to the EXAM STATUS field
97 ;
98 D ^RAORDC I +$P(RANEXT,"^",3)>1,RACS'="Y",$S($P(RACN0,"^",6)']"":1,$P(^DIC(42,+$P(RACN0,"^",6),0),U,3)="D":1,1:0) D EN^RAUTL0
99 S RACN0A=$G(^RADPT(RADFN,"DT",RADTI,"P",RACNI,0)) ; updated 0 node!
100 ; Do we need to 'Generate Exam Alert' based on the exam status?
101 I $D(^RA(72,+$P(RACN0A,"^",3),"ALERT")),($P(^("ALERT"),"^")="y") D
102 . ; fire off the 'Rad Patient Examined' alert.
103 . N RAPRIT,RAORDIFN
104 . S RAPRIT=+$P(RACN0A,"^",2) ; possible call to OERR3^RAORDU1
105 . S RAORDIFN=+$P(RACN0A,"^",11) ; possible call to OERR^RAORDU1
106 . D:$$ORVR^RAORDU()=2.5 OERR^RAUTL1
107 . D:$$ORVR^RAORDU()'<3 OERR3^RAUTL1
108 . Q
109 ;
110 R X:3 D
111 .N RAEXEDT S RAEXEDT=$$CMPAFTR^RAO7XX(1)
112 .D EXM^RAHLRPC
113 ;P18 compares -if procedure was changed - sends XX message
114 Q
115USER S %="A",%DUZ=DUZ W ! D ^XUVERIFY G USERQ:%=-1 I %'=1 W $C(7)," ??" G USER
116 Q
117USERQ K RADUZ S RAPOP=1 Q
118WHY1 ;explain why prim/sec resid/staff, diagnoses prompts are skipped
119 Q:$G(DA)<1!($G(DA(1))<1)!($G(DA(2))<1)
120 N RA0,RA1,RA2,RA5 N:'$D(RA3)#2 RA3 N:'$D(RA4)#2 RA4
121 S RA0=$G(^RADPT(DA(2),"DT",DA(1),"P",DA,0)) Q:'RA0 S RA2=0
122 I $G(RA3)=13 D WHY11 G WHYMSG ;diagnoses
123 S RA3=12,RA4=70 D WHY11 ;residents
124 S RA3=15,RA4=60 D WHY11 ;staff
125WHYMSG W:'RA2 !!?12,"No data have been entered for ",$S(RA3'=13:"residents/staff",1:"diagnoses")," yet.",!
126WHYMSG2 W !?12,$C(7),"The selected case belongs to a print set,",!?12,"Please use the 'Report Enter/Edit' option",!?12,"to enter data for ",$S(RA3=99:"residents/staff/diagnoses",RA3'=13:"residents/staff",1:"diagnoses"),".",!!
127 Q
128WHY11 Q:'+$P(RA0,"^",RA3)
129 S RA2=1 W !!?2,$P(^DD(70.03,RA3,0),"^")," :",?35
130 W:RA3'=13 $P(^VA(200,+$P(RA0,"^",RA3),0),"^") W:RA3=13 $P(^RA(78.3,+$P(RA0,"^",RA3),0),"^") W !
131 S RA5=$P($P(^DD(70.03,RA4,0),"^",4),";") Q:'$O(^RADPT(DA(2),"DT",DA(1),"P",DA,RA5,0))
132 S RA1=0 W !?4,$P(^DD(70.03,RA4,0),"^")," :"
133 F S RA1=$O(^RADPT(DA(2),"DT",DA(1),"P",DA,RA5,RA1)) Q:'RA1 I +^(RA1,0) W ?37 W:RA3'=13 $P($G(^VA(200,+^(0),0)),"^") W:RA3=13 $P($G(^RA(78.3,+^(0),0)),"^") W !
134 Q
135WHY2 ;explain why diags prompts are skipped
136 N RA3 S RA3=13,RA4=13.1 G WHY1
Note: See TracBrowser for help on using the repository browser.