source: FOIAVistA/trunk/r/REGISTRATION-DGQE-DG-DPT-GRPX-VAD-VAF-VAS-VAT-VAU--VA-VIC--DGBT--DGJ--DGYA--VALM/DGPFUT2.m@ 1128

DGPFUT2 ;ALB/KCL - PRF UTILITIES CONTINUED ; 12/17/03 2:56pm
 ;;5.3;Registration;**425,554,650**;Aug 13, 1993;Build 3
 ;
 ; This routine contains generic calls for use throughout DGPF*.
 ;
 ;- no direct entry
 QUIT
 ;
 ;
GETPAT(DGDFN,DGPAT) ;retrieve patient identifying information
 ; Used to obtain identifying information for a patient
 ; in the PATIENT (#2) file and place it in an array format.
 ;
 ; NOTE: Direct global reference of patient's zero node in the
 ;       PATIENT (#2) file is supported by DBIA #10035
 ;
 ;  Input:
 ;   DGDFN - (required) ien of patient in PATIENT (#2) file
 ;
 ; Output:
 ;  Function Value - returns 1 on success, 0 on failure
 ;   DGPAT - output array containing the patient identifying information,
 ;           on success, pass by reference.
 ;             Array subscripts are:
 ;             "DFN"  - ien PATIENT (#2) file
 ;             "NAME" - patient name
 ;             "SSN"  - patient Social Security Number
 ;             "DOB"  - patient date of birth (FM format)
 ;             "SEX"  - patient sex
 ;
 N DGNODE
 N RESULT
 ;
 S RESULT=0
 ;
 I $G(DGDFN)>0,$D(^DPT(DGDFN,0)) D
 .
 . ;-- obtain zero node of patient record (supported by DBIA #10035)
 . S DGNODE=$G(^DPT(DGDFN,0))
 . ;
 . S DGPAT("DFN")=DGDFN
 . S DGPAT("NAME")=$P(DGNODE,"^")
 . S DGPAT("SEX")=$P(DGNODE,"^",2)
 . S DGPAT("DOB")=$P(DGNODE,"^",3)
 . S DGPAT("SSN")=$P(DGNODE,"^",9)
 . S RESULT=1  ;success
 ;
 Q RESULT
 ;
GETDFN(DGICN,DGEROOT) ;Used to convert an ICN to a DFN.
 ;
 ;  Supported DBIA #2701:  The supported DBIA is used to retrieve the
 ;                         pointer (DFN) to the PATIENT (#2) file for a
 ;                         given ICN.
 ;
 ;  Input:
 ;    DGICN - Integrated Control Number with or without checksum
 ;  DGEROOT - (optional) closed root array name (i.e. "DGERROR") for
 ;            error dialog returned from BLD^DIALOG.  If not passed,
 ;            error dialog is returned in ^TMP("DIERR",$J) global.
 ;
 ;  Output:
 ;   Function Value - DFN on success, 0 on failure
 ;        DGEROOT() - error output array from BLD^DIALOG
 ;
 N DGDFN   ;ptr to patient
 N DIERR   ;var returned from BLD^DIALOG
 ;
 ;init error output array if passed
 S DGEROOT=$G(DGEROOT)
 I DGEROOT]"" K @DGEROOT
 ;
 S DGDFN=+$$GETDFN^MPIF001(+$G(DGICN))
 I DGDFN'>0 D BLD^DIALOG(261127,,,DGEROOT,"F")
 ;
 Q $S(DGDFN'>0:0,1:DGDFN)
 ;
SORT(DGPFARR) ;Re-sort of active record assignments by category then flag name
 ; This function re-sorts the active record flag assignment list for a
 ; patient by category (Cat I or Cat II) and then by flag name.
 ;
 ;  Input: [Required]
 ;    DGPFARR - Closed root reference array name of active assignments
 ;              to be sorted
 ;
 ;  Output:
 ;    Function Value - returns 1 on success, 0 on failure
 ;
 ;    DGPFARR() - Closed Root reference name of re-sorted assignments
 ;              - Category I's will sort first in the returned array.
 ;              - Category II's will sort second.
 ;
 N DGCAT   ;category
 N DGINDX  ;index array
 N DGNAME  ;flag name
 N DGSORT  ;re-sorted data array
 N DGX     ;generic counter
 ;
 ; check for input value - Quit if none found
 Q:DGPFARR']"" 0
 Q:'$O(@DGPFARR@("")) 0
 ;
 S DGSORT=$NA(^TMP("DGPFUT2",$J))
 K @DGSORT
 ;
 ;build index - ARRAY(Category (I or II),Flag Name)=sort number
 S DGX=0
 F  S DGX=$O(@DGPFARR@(DGX)) Q:'DGX  D
 . S DGCAT=$S($P(@DGPFARR@(DGX,"FLAG"),U)[26.11:2,1:1)
 . S DGINDX(DGCAT,$P(@DGPFARR@(DGX,"FLAG"),U,2))=DGX
 ;
 ;build sorted data array - 
 S (DGCAT,DGX)=0
 F  S DGCAT=$O(DGINDX(DGCAT)) Q:'DGCAT  D
 . S DGNAME=""
 . F  S DGNAME=$O(DGINDX(DGCAT,DGNAME)) Q:DGNAME=""  D
 . . S DGX=DGX+1
 . . M @DGSORT@(DGX)=@DGPFARR@(DGINDX(DGCAT,DGNAME))
 ;
 ;remove input array and replace with sorted array, kill sort array
 K @DGPFARR
 M @DGPFARR=@DGSORT
 K @DGSORT
 ;
 Q 1
 ;
ACTDT ; update PRF Software Activation Date field in (#26.18)
 ; This utility should only be run at the Alpha and Beta test sites
 ; of the Patient Record Flags Project, Patch DG*5.3*425.
 ; If necessary, this entry point will change the date that the
 ; Patient Record Flags (PRF) System became active.
 ; The (#1) PRF SOFTWARE ACTIVATION DATE field of the (#26.18) PRF
 ; PARAMETERS file, will be changed to:  SEP 25, 2003
 ;
 ;  Input:  none
 ;
 ; Output:  User message on successful or failure of file update
 ;
 N DGACTDT   ; Nationally Released Software Activation Date value
 N DGIENS    ; IEN - internal entry # OF (#26.18) FILE
 N DGFLD     ; PRF Software Activation Date field #
 N DGFDA     ; FDA data array for filer
 N DGERR     ; error message array returned from filer
 N DGERRMSG  ; error message for display
 N DGPARM    ; current internal/external values of field
 ;
 S DGACTDT="SEP 25, 2003"
 S DGIENS="1,"
 S DGFLD=1
 ;
 ; display user message
 W !!,"Updating the PRF SOFTWARE ACTIVATION DATE (#1) field in the PRF PARAMETERS FILE (#26.18) to the value of SEP 25, 2003..."
 ;
 ; checks for necessary programmer variables
 I '$G(DUZ)!($G(DUZ(0))'="@")!('$G(DT))!($G(U)'="^") D
 . S DGERRMSG="Your programming variables are not set up properly."
 ;
 ; check if activation is not less than the current date
 I '$D(DGERRMSG),DT<3030925 D
 . S DGERRMSG="This file/field update can't be run before the date of SEP 25, 2003 is reached."
 ;
 ; get current activation date from PRF PARAMETERS (#26.18) file
 I '$D(DGERRMSG) D
 . D GETS^DIQ(26.18,"1,",1,"IE","DGPARM","DGERR")
 . ;
 . ; check for errors and inform the user
 . I $D(DGERR) D  Q
 . . S DGERRMSG=$G(DGERR("DIERR",1,"TEXT",1))
 . ;
 . ; check to make sure field is not set already
 . I $G(DGPARM(26.18,"1,",1,"I"))=3030925 D
 . . S DGERRMSG="The date value is already set to SEP 25, 2003."
 ;
 ; now start the (#26.18) filing process
 I '$D(DGERRMSG) D
 . ;
 . ; DELETE activation date before filing since field is uneditable
 . S DGFDA(26.18,DGIENS,1)="@"
 . D FILE^DIE("","DGFDA","DGERR")
 . ;
 . ; check for errors and inform the user
 . I $D(DGERR) D  Q
 . . S DGERRMSG=$G(DGERR("DIERR",1,"TEXT",1))
 . ;
 . ; setup and file the new activation date value (external)
 . S DGFDA(26.18,DGIENS,1)=DGACTDT
 . D FILE^DIE("SE","DGFDA","DGERR")
 . ;
 . ; check for success or errors and inform the user of update status
 . I $D(DGERR) D  Q
 . . S DGERRMSG=$G(DGERR("DIERR",1,"TEXT",1))
 ;
 ; display successful/failure file update - updated field and value
 W !!,$C(7)
 I $D(DGERRMSG) D
 . W "Field could not be updated...",DGERRMSG
 E  D
 . W "Field was successfully changed from ",$G(DGPARM(26.18,"1,",1,"E"))," to ",$G(DGFDA(26.18,DGIENS,DGFLD)),"."
 ;
 Q
 ;
BLDTFL(DGDFN,DGTFL) ;build array of Treating Facilities
 ; This function builds an array of INSTITUTION (#4) file pointers
 ; that are non-local medical treating facilities for a given patient.
 ;
 ;  Input:
 ;    DGDFN - pointer to patient in PATIENT (#2) file
 ;
 ;  Output:
 ;   Function value - 1 on results returned; 0 on failure
 ;    DGTFL - array of treating facility INSTITUTION (#4) file pointers
 ;            Format:  DGTFL(pointer)=date last treated
 ;
 N DGLOC   ;pointer to local facility in INSTITUTION (#4) file
 N DGDLT   ;date last treated
 N DGFAC   ;TFL API results array
 N DGI     ;generic counter
 N DGINST  ;pointer to INSTITUTION (#4) file
 ;
 Q:$G(DGDFN)'>0 0  ;validate input parameter
 ;
 D TFL^VAFCTFU1(.DGFAC,DGDFN)
 S DGLOC=$P($$SITE^VASITE(),U)
 S DGI=0
 F  S DGI=$O(DGFAC(DGI)) Q:'DGI  D
 . S DGINST=$$IEN^XUAF4($P(DGFAC(DGI),U))
 . Q:DGINST'>0
 . Q:DGINST=DGLOC  ;filter local facility
 . Q:'$$TF^XUAF4(DGINST)  ;facility must be active treating facility
 . S DGDLT=+$P(DGFAC(DGI),U,3)
 . S DGTFL(DGINST)=DGDLT
 ;
 Q $S(+$O(DGTFL(0)):1,1:0)