source: FOIAVistA/trunk/r/VA_FILEMAN-ARJT-DI-DD-DM-DT-%DT-%RCR/DINIT125.m@ 1397

Last change on this file since 1397 was 628, checked in by George Lilly, 15 years ago

initial load of FOIAVistA 6/30/08 version
File size: 6.6 KB
Line 
1DINIT125 ;SFISC/MKO-SORT TEMPLATE FILE ;1:13 PM 13 Nov 1998
2 ;;22.0;VA FileMan;;Mar 30, 1999
3 ;Per VHA Directive 10-93-142, this routine should not be modified.
4 F I=1:2 S X=$T(Q+I) Q:X="" S Y=$E($T(Q+I+1),4,999),X=$E(X,4,999) S:$A(Y)=126 I=I+1,Y=$E(Y,2,999)_$E($T(Q+I+1),5,99) S:$A(Y)=61 Y=$E(Y,2,999) S @X=Y
5 G ^DINIT126
6Q Q
7 ;;^DD(.4014,14,21,1,0)
8 ;;=Fields are assigned a probability rating based on the number of hits
9 ;;^DD(.4014,14,21,2,0)
10 ;;=found for the query (or sort) condition. The probability rating is used
11 ;;^DD(.4014,14,21,3,0)
12 ;;=to determine the order in which query conditions should be executed
13 ;;^DD(.4014,14,21,4,0)
14 ;;=during the sort phase. Fields with a higher probability rating are
15 ;;^DD(.4014,14,21,5,0)
16 ;;=executed first to most quickly cut down the number of records that have
17 ;;^DD(.4014,14,21,6,0)
18 ;;=to be processed.
19 ;;^DD(.4014,14,23,0)
20 ;;=^^1^1^2930125^
21 ;;^DD(.4014,14,23,1,0)
22 ;;=Calculated by a call to the FileMan Query Optimizer routine ^DIOQ.
23 ;;^DD(.4014,14,"DT")
24 ;;=2930125
25 ;;^DD(.4014,15,0)
26 ;;=DATA TYPE FOR SORTING^P.81'^DI(.81,^0;10^Q
27 ;;^DD(.4014,15,21,0)
28 ;;=^^5^5^2930514^
29 ;;^DD(.4014,15,21,1,0)
30 ;;=This pointer to the FileMan DATA TYPE file is entered automatically by
31 ;;^DD(.4014,15,21,2,0)
32 ;;=FileMan during the sort/print. Note that if sorting by a pointer or a
33 ;;^DD(.4014,15,21,3,0)
34 ;;=variable pointer, FileMan will follow the pointer chain until it gets to
35 ;;^DD(.4014,15,21,4,0)
36 ;;=one of the other data types, in order to determine how to correctly set up
37 ;;^DD(.4014,15,21,5,0)
38 ;;=the sort logic.
39 ;;^DD(.4014,15,23,0)
40 ;;=^^1^1^2930514^
41 ;;^DD(.4014,15,23,1,0)
42 ;;=Pointer to DATA TYPE file, derived by FileMan in routine DTYP^DIP1.
43 ;;^DD(.4014,15,"DT")
44 ;;=2930514
45 ;;^DD(.4014,16,0)
46 ;;=COMPUTED FIELD CODE^K^^CM;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
47 ;;^DD(.4014,16,3)
48 ;;=This is Standard MUMPS code, generated for sorting by computed fields or pointer fields.
49 ;;^DD(.4014,16,9)
50 ;;=@
51 ;;^DD(.4014,16,21,0)
52 ;;=^^3^3^2930201^
53 ;;^DD(.4014,16,21,1,0)
54 ;;=This field contains MUMPS code used to find the actual value of a field
55 ;;^DD(.4014,16,21,2,0)
56 ;;=that is computed or a pointer. The code is generated by DICOMP. This
57 ;;^DD(.4014,16,21,3,0)
58 ;;=code may execute code in OVERFLOW nodes as well.
59 ;;^DD(.4014,16,23,0)
60 ;;=^^1^1^2930201^
61 ;;^DD(.4014,16,23,1,0)
62 ;;=Generated by DICOMP. Put into the DPP array in C^DIP0.
63 ;;^DD(.4014,16,"DT")
64 ;;=2930201
65 ;;^DD(.4014,17,0)
66 ;;=MULTIPLE FIELD DATA^.40141^^1;0
67 ;;^DD(.4014,18,0)
68 ;;=RELATIONAL JUMP FIELD DATA^.401418^^2;0
69 ;;^DD(.4014,19,0)
70 ;;=OVERFLOW DATA^.401419^^3;0
71 ;;^DD(.4014,19,21,0)
72 ;;=^^5^5^2930201^
73 ;;^DD(.4014,19,21,1,0)
74 ;;=This field contains the first subscript from the part of the DPP array
75 ;;^DD(.4014,19,21,2,0)
76 ;;=that contains overflow code executed when sorting by a field that is
77 ;;^DD(.4014,19,21,3,0)
78 ;;=gotten to relationally or a computed field. Overflow code is generated
79 ;;^DD(.4014,19,21,4,0)
80 ;;=when needed by DICOMP. This field will typically look something like
81 ;;^DD(.4014,19,21,5,0)
82 ;;="OVF0".
83 ;;^DD(.4014,19,23,0)
84 ;;=^^1^1^2930201^
85 ;;^DD(.4014,19,23,1,0)
86 ;;=Generated by DICOMP from DIP0 during the sort/print option.
87 ;;^DD(.4014,19,"DT")
88 ;;=2930201
89 ;;^DD(.4014,20,0)
90 ;;=SUBHEADER OUTPUT TRANSFORM^K^^OUT;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
91 ;;^DD(.4014,20,3)
92 ;;=This is Standard MUMPS code. This is used only when sorting by a user-specified cross-reference in input variable BY(0).
93 ;;^DD(.4014,20,9)
94 ;;=@
95 ;;^DD(.4014,20,21,0)
96 ;;=^^6^6^2930204^
97 ;;^DD(.4014,20,21,1,0)
98 ;;=Defined only when using the BY(0) input variable to the FileMan print,
99 ;;^DD(.4014,20,21,2,0)
100 ;;=EN1^DIP, which allows the user to specify a cross-reference to sort on.
101 ;;^DD(.4014,20,21,3,0)
102 ;;=The user is allowed to specify MUMPS code that can be used as an output
103 ;;^DD(.4014,20,21,4,0)
104 ;;=transform for any of the subheaders (i.e., subscripts in the
105 ;;^DD(.4014,20,21,5,0)
106 ;;=cross-reference) in the S input array. This output transform code is
107 ;;^DD(.4014,20,21,6,0)
108 ;;=stored in this field.
109 ;;^DD(.4014,20,23,0)
110 ;;=^^4^4^2930204^
111 ;;^DD(.4014,20,23,1,0)
112 ;;=Stores output transform code from the third piece of S(0,N) where N is
113 ;;^DD(.4014,20,23,2,0)
114 ;;=the sort level. This is an input array used in conjunction with BY(0)
115 ;;^DD(.4014,20,23,3,0)
116 ;;=when user specifies a specific cross-reference to use for the sort, in
117 ;;^DD(.4014,20,23,4,0)
118 ;;=in the FileMan print routine EN1^DIP.
119 ;;^DD(.4014,20,"DT")
120 ;;=2930204
121 ;;^DD(.4014,21,0)
122 ;;=TEXT SORT FLAG^S^SORT:SORT LIKE TEXT;RANGE:TREAT RANGE LIKE TEXT;^SRTTXT;1^Q
123 ;;^DD(.4014,21,21,0)
124 ;;=^^12^12^2931221^
125 ;;^DD(.4014,21,21,1,0)
126 ;;=This flag will be set in one of two cases.
127 ;;^DD(.4014,21,21,2,0)
128 ;;= 1) If the user entered the ;TXT qualifier, the flag will be set to
129 ;;^DD(.4014,21,21,3,0)
130 ;;="SORT", and will cause a space to be inserted at the beginning of each
131 ;;^DD(.4014,21,21,4,0)
132 ;;=sort value, causing even numeric fields to be sorted as if they were text.
133 ;;^DD(.4014,21,21,5,0)
134 ;;= 2) If the user entered a FROM or TO value that is a non-canonic number,
135 ;;^DD(.4014,21,21,6,0)
136 ;;=the flag will be set to RANGE, and will cause sort values that are numeric
137 ;;^DD(.4014,21,21,7,0)
138 ;;=to be treated as if they were text, when seeing whether they fall within
139 ;;^DD(.4014,21,21,8,0)
140 ;;=the from/to range. However, they will still sort like numbers (MUMPS sort
141 ;;^DD(.4014,21,21,9,0)
142 ;;=sequence).
143 ;;^DD(.4014,21,21,10,0)
144 ;;=
145 ;;^DD(.4014,21,21,11,0)
146 ;;=The flag is set automatically when the user is entering the sort fields in
147 ;;^DD(.4014,21,21,12,0)
148 ;;=^DIP, and the from/to values in ^DIP1.
149 ;;^DD(.4014,21,"DT")
150 ;;=2931221
151 ;;^DD(.40141,0)
152 ;;=MULTIPLE FIELD DATA SUB-FIELD^^1^2
153 ;;^DD(.40141,0,"DT")
154 ;;=2930201
155 ;;^DD(.40141,0,"IX","B",.40141,.01)
156 ;;=
157 ;;^DD(.40141,0,"NM","MULTIPLE FIELD DATA")
158 ;;=
159 ;;^DD(.40141,0,"UP")
160 ;;=.4014
161 ;;^DD(.40141,.01,0)
162 ;;=MULT.FILE OR SUBFILE NO.^MNJ13,5^^0;1^K:+X'=X!(X>9999999.99999)!(X<0)!(X?.E1"."6N.N) X
163 ;;^DD(.40141,.01,1,0)
164 ;;=^.1
165 ;;^DD(.40141,.01,1,1,0)
166 ;;=.40141^B
167 ;;^DD(.40141,.01,1,1,1)
168 ;;=S ^DIBT(DA(2),2,DA(1),1,"B",$E(X,1,30),DA)=""
169 ;;^DD(.40141,.01,1,1,2)
170 ;;=K ^DIBT(DA(2),2,DA(1),1,"B",$E(X,1,30),DA)
171 ;;^DD(.40141,.01,3)
172 ;;=Type a Number between 0 and 9999999.99999, 5 Decimal Digits. This is the file/subfile number when sorting by a multiple field.
173 ;;^DD(.40141,.01,21,0)
174 ;;=^^4^4^2930201^
175 ;;^DD(.40141,.01,21,1,0)
176 ;;=All files or subfiles needed to get back up to the top level from a
177 ;;^DD(.40141,.01,21,2,0)
178 ;;=multiple field will be represented by an entry in this field. The
179 ;;^DD(.40141,.01,21,3,0)
180 ;;=file or subfile number will be used as a subscript in the DPP array
Note: See TracBrowser for help on using the repository browser.