BSDXAPI1 ; VEN/SMH - SCHEDULING APIs - Continued!!! ; 7/3/12 12:37pm
	;;1.7T1;BSDX;;Aug 31, 2011;Build 18
	; Licensed under LGPL  
	;
	; Change History (BSDXAPI and BSDXAPI1)
	; Pre 1.42:
	; - Simplified entry points (MAKE1, CANCEL1, CHECKIN1)
	; 2010-11-5: (1.42)
	; - Fixed errors having to do uncanceling patient appointments if it was 
	;   a patient cancelled appointment.
	; - Use new style Fileman API for storing appointments in file 44 in 
	;   $$MAKE due to problems with legacy API.
	; 2010-11-12: (1.42)
	; - Changed ="C" to ["C" in SCIEN. Cancelled appointments can be "PC" as 
	;   well. 
	; 2010-12-5 (1.42)
	; Added an entry point to update the patient note in file 44.
	; 2010-12-6 (1.42)
	; MAKE1 incorrectly put info field in BSDR("INFO") rather than BSDR("OI")
	; 2010-12-8 (1.42)
	; Removed restriction on max appt length. Even though this restriction
	; exists in fileman (120 minutes), PIMS ignores it. Therefore, I 
	; will ignore it here too.
	; 2011-01-25 (v.1.5)
	; Added entry point $$RMCI to remove checked in appointments.
	; In $$CANCEL, if the appointment is checked in, delete check-in rather than
	;  spitting an error message to the user saying 'Delete the check-in'
	; Changed all lines that look like this:
	;  I $G(BSDR("ADT"))'?7N1".".4N Q 1_U_"Appt Date/Time error: "_$G(BSDR("ADT"))
	; to:
	;  I $G(BSDR("ADT"))'?7N.1".".4N Q 1_U_"Appt Date/Time error: "_$G(BSDR("ADT"))
	; to allow for date at midnight which does not have a dot at the end.
	; 2011-01-26 (v.1.5)
	; More user friendly message if patient already has appointment in $$MAKE:
	;  Spits out pt name and user friendly date.
	; 2012-06-18 (v 1.7)
	; Removing transacions. Means that code SHOULD NOT fail. Took all checks
	;  out for making an appointment to MAKECK. We call this first to make sure
	; that the appointment is okay to make before committing to make it. We
	; still have the provision to delete the data though if we fail when we 
	; actually make the appointment.
	; CANCELCK exists for the same purpose.
	; CHECKINK ditto
	; New API: $$NOWSHOW^BSDXAPI1 for no-showing patients
	; Moved RMCI from BSDXAPI to BSDXAPI1 because BSDXAPI1 is getting larger
	;  than 20000 characters.
	;
NOSHOW(PAT,CLINIC,DATE,NSFLAG) ; $$ PEP; No-show Patient at appt date (new in v1.7)
	; PAT = DFN
	; CLINIC = SC IEN
	; DATE = FM Date/Time of Appointment
	; NSFLAG = truthy value to add no-show, or falsy to remove (use 1 or 0 pls!)
	; 1^error for failure, 0 for success
	; Code follows EN1^SDN
	;
	; Check for failure conditions first before doing this. No globals set here
	N NOSHOWCK S NOSHOWCK=$$NOSHOWCK(PAT,CLINIC,DATE,NSFLAG)
	I NOSHOWCK Q NOSHOWCK
	;
	; Set up Protocol Driver
	N SDNSHDL,SDDA S SDNSHDL=$$HANDLE^SDAMEVT(1) S SDDA=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE)
	N SDATA
	D BEFORE^SDAMEVT(.SDATA,PAT,DATE,CLINIC,SDDA,SDNSHDL) ; Only ^TMP set here.
	;
	; Simulated Errors
	Q:$D(BSDXSIMERR2) 1_U_"Simulated Error"
	;
	; Edit the ^DPT( "S" node entry - Noshow or undo noshow
	; Failure analysis: if we fail here, we presume no change happened in 
	; ^DPT(DA,"S", and so we just have to roll back ^BSDXAPPT
	N BSDXIENS S BSDXIENS=DATE_","_PAT_","
	N BSDXFDA
	I +NSFLAG D
	. S BSDXFDA(2.98,BSDXIENS,3)="N"
	. S BSDXFDA(2.98,BSDXIENS,14)=DUZ
	. S BSDXFDA(2.98,BSDXIENS,15)=$$NOW^XLFDT()
	E  D
	. S BSDXFDA(2.98,BSDXIENS,3)="@"
	. S BSDXFDA(2.98,BSDXIENS,14)="@"
	. S BSDXFDA(2.98,BSDXIENS,15)="@"
	N BSDXMSG
	D FILE^DIE("","BSDXFDA","BSDXMSG")
	Q:$D(BSDXMSG) 1_U_"Fileman edit to DPT error: Patient="_PAT_" Appt="_DATE_" Error="_BSDXMSG("DIERR",1,"TEXT",1)
	; 
	; This M error trigger tests if ^BSDXAPPT rolls back. 
	; I won't try to roll back ^DPT(,"S" because
	; the M error is caused here, so if I try to rollback, I can cause another
	; error. Infinite Errors then.
	I $D(BSDXSIMERR3) N X S X=1/0
	;
	; Run the event driver
	D NOSHOW^SDAMEVT(.SDATA,PAT,DATE,CLINIC,SDDA,0,SDNSHDL)
	Q 0
	;
NOSHOWCK(PAT,CLINIC,DATE,NSFLAG) ; $$ PEP; No-show Check
	; TODO: Not all appointments can be no showed.
	; Check the code in SDAMN 
	; S SDSTB=$$STATUS^SDAM1(DFN,SDT,SDCL,$G(^DPT(DFN,"S",SDT,0))) ; before status  
	; Q:'$$CHK ; Checks $D(^SD(409.63,"ANS",1,+SDSTB))
	QUIT 0
	;
RMCI(PAT,CLINIC,DATE)	 ;PEP; -- Remove Check-in; $$
	; PAT = DFN
	; CLINIC = SC IEN
	; DATE = FM Date/Time of Appointment
	;
	; Returns:
	; 0 if okay
	; -1 if failure
	;
	; Call like this: $$RMCI(233,33,3110102.1130)
	;
	; Check to see if we can remove the check-in
	N BSDXERR S BSDXERR=$$RMCICK(PAT,CLINIC,DATE)
	I BSDXERR Q BSDXERR
	;
	; Move my variables into the ones used by SDAPIs (just a convenience)
	NEW SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL,SDMODE
	S DFN=PAT,SDT=DATE,SDCL=CLINIC,SDMODE=2,SDDA=$$SCIEN^BSDXAPI(DFN,SDCL,SDT)
	;
	I SDDA<1 QUIT 0    ; Appt cancelled; cancelled appts rm'ed from file 44
	;
	; remember before status
	S SDCIHDL=$$HANDLE^SDAMEVT(1),SDATA=SDDA_U_DFN_U_SDT_U_SDCL
	D BEFORE^SDAMEVT(.SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL)
	;
	; remove check-in using filer.
	N BSDXIENS S BSDXIENS=SDDA_","_DATE_","_CLINIC_","
	N BSDXFDA
	S BSDXFDA(44.003,BSDXIENS,309)="@" ; CHECKED-IN
	S BSDXFDA(44.003,BSDXIENS,302)="@" ; CHECK IN USER
	S BSDXFDA(44.003,BSDXIENS,305)="@" ; CHECK IN ENTERED
	N BSDXERR
	D FILE^DIE("","BSDXFDA","BSDXERR")
	I $D(BSDXERR) QUIT "-1~Can't file for Pat "_PAT_" in Clinic "_CLINIC_" at "_DATE_". Fileman reported an error: "_BSDXERR("DIERR",1,"TEXT",1)
	;
	; set after status
	; S SDDA=$$SCIEN(DFN,SDCL,SDT) ;smh -why is this here? SDDA won't change.
	S SDCIHDL=$$HANDLE^SDAMEVT(1),SDATA=SDDA_U_DFN_U_SDT_U_SDCL
	D AFTER^SDAMEVT(.SDATA,DFN,SDT,SDCL,SDDA,SDCIHDL)
	;
	; call event driver
	D EVT^SDAMEVT(.SDATA,4,SDMODE,SDCIHDL)
	QUIT 0
	;
RMCICK(PAT,CLINIC,DATE)	;PEP; Can you remove a check-in for this patient?
	; PAT - DFN by value
	; CLINIC - ^SC ien by value
	; DATE - Appointment Date
	; Output: 0 if okay or 1 if error
	;
	; Get appointment IEN in ^SC(DA(2),"S",DA(1),1,
	N SCIEN S SCIEN=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE)
	;
	; If not there, it has been cancelled.
	I 'SCIEN QUIT 0
	;
	; Check if checked out
	I $$CO^BSDXAPI(PAT,CLINIC,DATE,SCIEN) Q 1_U_"Appointment Already Checked Out"
	;
	QUIT 0
	;
UPDATENT(PAT,CLINIC,DATE,NOTE)	; PEP; Update Note in ^SC for patient's appointment @ DATE
	; PAT = DFN
	; CLINIC = SC IEN
	; DATE = FM Date/Time of Appointment
	;
	; Returns:
	; 0 if okay
	; -1 if failure
	;
	; ERROR SIMULATION
	I $G(BSDXSIMERR1) QUIT "-1~Simulated Error"
	;
	N SCIEN S SCIEN=$$SCIEN^BSDXAPI(PAT,CLINIC,DATE) ; ien of appt in ^SC
	I SCIEN<1 QUIT 0    ; Appt cancelled; cancelled appts rm'ed from file 44
	N BSDXIENS S BSDXIENS=SCIEN_","_DATE_","_CLINIC_","
	N BSDXFDA S BSDXFDA(44.003,BSDXIENS,3)=$E(NOTE,1,150)
	N BSDXERR
	D FILE^DIE("","BSDXFDA","BSDXERR")
	I $D(BSDXERR) QUIT "-1~Can't file for Pat "_PAT_" in Clinic "_CLINIC_" at "_DATE_". Fileman reported an error: "_BSDXERR("DIERR",1,"TEXT",1)
	QUIT 0
	;