source: WorldVistAEHR/trunk/r/CLINICAL_REMINDERS-PXRM/PXRMLRM.m@ 1259

Last change on this file since 1259 was 623, checked in by George Lilly, 15 years ago

revised back to 6/30/08 version

File size: 5.0 KB
Line 
1PXRMLRM ; SLC/PJH/PKR - List Rule Management ; 05/15/2006
2 ;;2.0;CLINICAL REMINDERS;**4**;Feb 04, 2005;Build 21
3 ;
4 ;Main entry point for PXRM LIST RULE MANAGEMENT
5START N PXRMDONE,PXRMTYP,VALMBCK,VALMCNT,VALMSG,X,XMZ,XQORM,XQORNOD
6 S X="IORESET"
7 D ENDR^%ZISS
8 S VALMCNT=0
9 ;Default view is Rule Sets
10 S PXRMTYP=3
11 D EN^VALM("PXRM LIST RULE MANAGEMENT")
12 Q
13 ;
14BLDLIST ;Build workfile
15 K ^TMP("PXRMLRM",$J)
16 N IEN,IND,PLIST
17 D LIST(.PLIST,.IEN,PXRMTYP)
18 M ^TMP("PXRMLRM",$J)=PLIST
19 S VALMCNT=PLIST("VALMCNT")
20 F IND=1:1:VALMCNT D
21 .S ^TMP("PXRMLRM",$J,"IDX",IND,IND)=IEN(IND)
22 I PXRMTYP=1 D CHGCAP^VALM("HEADER2","Finding Rule Name")
23 I PXRMTYP=2 D CHGCAP^VALM("HEADER2","Reminder Rule Name")
24 I PXRMTYP=3 D CHGCAP^VALM("HEADER2","Rule Set Name")
25 I PXRMTYP=4 D CHGCAP^VALM("HEADER2","Report Output Rule Name")
26 I PXRMTYP=5 D CHGCAP^VALM("HEADER2","Patient List Rule Name")
27 Q
28 ;
29ENTRY ;Entry code
30 D BLDLIST,XQORM
31 Q
32 ;
33EXIT ;Exit code
34 K ^TMP("PXRMLRM",$J)
35 K ^TMP("PXRMLRMH",$J)
36 D CLEAN^VALM10
37 D FULL^VALM1
38 S VALMBCK="Q"
39 Q
40 ;
41FRE(NUMBER,NAME,CLASS) ;Format entry number, name
42 ;and date packed.
43 N TCLASS,TEMP,TNAME,TSOURCE
44 S TEMP=$$RJ^XLFSTR(NUMBER,5," ")
45 S TNAME=$E(NAME,1,60)
46 S TEMP=TEMP_" "_$$LJ^XLFSTR(TNAME,60," ")
47 S TCLASS=$S(CLASS="N":"NATIONAL",CLASS="V":"VISN",1:"LOCAL")
48 S TEMP=TEMP_" "_TCLASS
49 Q TEMP
50 ;
51HDR ; Header code
52 S VALMSG="+ Next Screen - Prev Screen ?? More Actions"
53 Q
54 ;
55HELP(CALL) ;General help text routine
56 N HTEXT
57 I CALL=1 D
58 .S HTEXT(1)="Select DE to display or edit a rule."
59 .S HTEXT(2)="Select ED to edit a rule"
60 ;
61 I CALL=2 D
62 .S HTEXT(1)=" Select F to edit term based finding rules."
63 .S HTEXT(2)=" Select P to edit patient list based finding rules."
64 .S HTEXT(3)=" Select R to edit reminder rules."
65 .S HTEXT(4)=" Select S to edit rule sets. A rule set may contain either "
66 .S HTEXT(5)="finding list rules or patient list rules or both. These "
67 .S HTEXT(6)="component list rules must be created before the rule set "
68 .S HTEXT(7)="can be constructed."
69 ;
70 D HELP^PXRMEUT(.HTEXT)
71 Q
72 ;
73HLP ;Help code
74 N ORU,ORUPRMT,SUB,XQORM
75 S SUB="PXRMLRMH"
76 D EN^VALM("PXRM LIST RULE HELP")
77 Q
78 ;
79INIT ;Init
80 S VALMCNT=0
81 Q
82 ;
83LIST(RLIST,IEN,LRTYP) ;Build a list of list rule entries.
84 N DATA,IND,LRCLASS,LRNAME,NAME
85 ;Build the list in alphabetical order.
86 S VALMCNT=0
87 S NAME=""
88 F S NAME=$O(^PXRM(810.4,"B",NAME)) Q:NAME="" D
89 .S IND=$O(^PXRM(810.4,"B",NAME,"")) Q:'IND
90 .S DATA=$G(^PXRM(810.4,IND,0))
91 .I $P(DATA,U,3)'=LRTYP Q
92 .S LRNAME=$P(DATA,U)
93 .S LRCLASS=$P($G(^PXRM(810.4,IND,100)),U)
94 .S VALMCNT=VALMCNT+1
95 .S RLIST(VALMCNT,0)=$$FRE(VALMCNT,LRNAME,LRCLASS)
96 .S IEN(VALMCNT)=IND
97 S RLIST("VALMCNT")=VALMCNT
98 Q
99 ;
100LRADD ;Add Rule Option
101 ;
102 ;Reset Screen Mode
103 W IORESET
104 ;
105 ;Add Rule
106 D ADD^PXRMLRED
107 ;
108 ;Rebuild Workfile
109 D BLDLIST
110 S VALMBCK="R"
111 Q
112 ;
113LRINQ ;Rule Inquiry - PXRM LIST RULE DISPLAY/EDIT entry
114 N IND,LRIEN,VALMY
115 D EN^VALM2(XQORNOD(0))
116 ;If there is no list quit.
117 I '$D(VALMY) Q
118 S PXRMDONE=0
119 S IND=""
120 F S IND=$O(VALMY(IND)) Q:(+IND=0)!(PXRMDONE) D
121 .;Get the ien.
122 .S LRIEN=^TMP("PXRMLRM",$J,"IDX",IND,IND)
123 .D START^PXRMLRED(LRIEN,PXRMTYP)
124 D BLDLIST
125 S VALMBCK="R"
126 Q
127 ;
128PEXIT ;Protocol exit code
129 S VALMSG="+ Next Screen - Prev Screen ?? More Actions"
130 ;Reset after page up/down etc
131 D XQORM
132 Q
133 ;
134VIEW ;Select view
135 W IORESET
136 S VALMBCK="R"
137 N X,Y,CODE,DIR
138 K DIROUT,DIRUT,DTOUT,DUOUT
139 S DIR(0)="S"_U_"F:Finding Rule;"
140 S DIR(0)=DIR(0)_"P:Patient List Rule;"
141 S DIR(0)=DIR(0)_"R:Reminder Rule;"
142 S DIR(0)=DIR(0)_"S:Rule Set;"
143 S DIR("A")="TYPE OF VIEW"
144 S DIR("B")="F"
145 S DIR("?")="Select from the codes displayed. For detailed help type ??"
146 S DIR("??")=U_"D HELP^PXRMLRM(2)"
147 D ^DIR K DIR
148 I $D(DIROUT) S DTOUT=1
149 I $D(DTOUT)!($D(DUOUT)) Q
150 ;Change display type
151 S PXRMTYP=$S(Y="F":1,Y="P":5,Y="S":3,1:4)
152 S PXRMTYP=$S(Y="F":1,Y="P":5,Y="S":3,Y="R":2,1:4)
153 ;Rebuild Workfile
154 D BLDLIST,HDR
155 Q
156 ;
157XSEL ;PXRM LIST RULE MANAGEMENT SELECT ENTRY validation
158 N SEL,IEN
159 S SEL=$P(XQORNOD(0),"=",2)
160 ;Remove trailing ,
161 I $E(SEL,$L(SEL))="," S SEL=$E(SEL,1,$L(SEL)-1)
162 ;Invalid selection
163 I SEL["," D Q
164 .W $C(7),!,"Only one item number allowed." H 2
165 .S VALMBCK="R"
166 I ('SEL)!(SEL>VALMCNT)!('$D(@VALMAR@("IDX",SEL))) D Q
167 .W $C(7),!,SEL_" is not a valid item number." H 2
168 .S VALMBCK="R"
169 ;
170 ;Get the list ien.
171 S IEN=^TMP("PXRMLRM",$J,"IDX",SEL,SEL)
172 ;
173 ;Option to Display/Edit or Test Rule Set.
174 N DIR,OPTION,RIEN,X,Y
175 K DIROUT,DIRUT,DTOUT,DUOUT
176 S DIR(0)="SBM"_U_"DR:Display/Edit Rule;"
177 I $G(PXRMTYP)=3 S DIR(0)=DIR(0)_"TEST:Test Rule Set"
178 S DIR("A")="Select Action: "
179 S DIR("B")="DR"
180 S DIR("?")="Select from the codes displayed."
181 D ^DIR K DIR
182 I $D(DIROUT) S DTOUT=1
183 I $D(DTOUT)!($D(DUOUT)) S VALMBCK="R" Q
184 S OPTION=Y
185 I $G(OPTION)="" G XSELE
186 ;
187 ;Display/Edit
188 I OPTION="DR" D START^PXRMLRED(IEN,PXRMTYP)
189 Q:$D(DUOUT)!$D(DTOUT)
190 ;
191 ;Rule set test
192 I OPTION="TEST" D RSTEST^PXRMRST(IEN)
193 Q:$D(DUOUT)!$D(DTOUT)
194 ;
195XSELE ;
196 D CLEAN^VALM10
197 D BLDLIST,XQORM
198 S VALMBCK="R"
199 Q
200 ;
201XQORM S XQORM("#")=$O(^ORD(101,"B","PXRM LIST RULE MANAGEMENT SELECT ENTRY",0))_U_"1:"_VALMCNT
202 S XQORM("A")="Select Item: "
203 Q
204 ;
Note: See TracBrowser for help on using the repository browser.