| [613] | 1 | PSDTRAK ;BIR/DAV-Set up TRAKKER ; 14 Sept 94
|
|---|
| 2 | ;;3.0; CONTROLLED SUBSTANCES ;;13 Feb 97
|
|---|
| 3 | W !," "
|
|---|
| 4 | W !,"To set-up the TRAKKER:"
|
|---|
| 5 | W !," "
|
|---|
| 6 | W !,"(1) Turn on the TRAKKER by pressing the [on-off] key."
|
|---|
| 7 | W !," "
|
|---|
| 8 | W !," After the TRAKKER performs a self test the following prompt will"
|
|---|
| 9 | W !," be displayed ""Ready"""
|
|---|
| 10 | W !," "
|
|---|
| 11 | W !,"(2) At this point hold down the [ctrl] key and press [E]."
|
|---|
| 12 | W !," "
|
|---|
| 13 | W !," The words ""CONFIGURATION MENU:"" should appear."
|
|---|
| 14 | W !," "
|
|---|
| 15 | W !,"(3) Press the [Enter] key until you are prompted to ""Select or modify"
|
|---|
| 16 | W !," operating parms.?"" The word NO will appear. Use the space key to"
|
|---|
| 17 | W !," toggle this to a YES and press [Enter]."
|
|---|
| 18 | W !," "
|
|---|
| 19 | W !,"(4) Use the [enter] key to step through the basic operating parameters"
|
|---|
| 20 | W !," "
|
|---|
| 21 | W !," NOTE - in most cases the proper selection can be made using the"
|
|---|
| 22 | W !," [space] key."
|
|---|
| 23 | W !," "
|
|---|
| 24 | 11 D WAIT G Q:$D(ERR)
|
|---|
| 25 | W !,"a. BEEP VOLUME - low or high"
|
|---|
| 26 | W !,"b. DIPLAY MODE...............BUFFERED"
|
|---|
| 27 | W !,"c. CHARACTER SET.............US-ASCII"
|
|---|
| 28 | W !,"d. CPU RESP REQD MODE........DISABLED"
|
|---|
| 29 | W !,"e. PREAMBLE REQUIRED.........NO"
|
|---|
| 30 | W !,"f. LASER SCANNER MODE........ONE SHOT TRIGGER"
|
|---|
| 31 | W !,"g. APPEND TIME TO DATA.......NO"
|
|---|
| 32 | W !,"h. TIME IS SECONDS...........YES"
|
|---|
| 33 | W !,"i. RESUME IRL PROGRAM........NO"
|
|---|
| 34 | W !,"j. AUTOMATIC SHUT-OFF........10"
|
|---|
| 35 | W !,"k. BACKLIGHT TIMEOUT.........60"
|
|---|
| 36 | W !," "
|
|---|
| 37 | W !,"(5) The next configuration heading is ""Select or modify comm protocol?"""
|
|---|
| 38 | W !," "
|
|---|
| 39 | W !," Use space bar to obtain POINT TO POINT"
|
|---|
| 40 | W !," "
|
|---|
| 41 | W !,"(6) Use the [enter] key to step through the ""comm protocol"""
|
|---|
| 42 | W !," "
|
|---|
| 43 | 22 D WAIT G Q:$D(ERR)
|
|---|
| 44 | W !,"a. CHECK CTS............NO"
|
|---|
| 45 | W !,"b. XON..................Hold down the [ctrl] key & press [Q], to get DC1"
|
|---|
| 46 | W !,"c. XOFF.................Hold down the [ctrl] key & press [S], to get DC3"
|
|---|
| 47 | W !,"d. BAUD RATE............1200"
|
|---|
| 48 | W !,"e. PARITY...............DISABLED"
|
|---|
| 49 | W !,"f. DATA BITS............8"
|
|---|
| 50 | W !,"g. STOP BITS............1"
|
|---|
| 51 | W !,"h. TIMEOUT DELAY........10 seconds"
|
|---|
| 52 | W !,"i. INTERCHAR DELAY......50 milliseconds"
|
|---|
| 53 | W !,"j. TURNAROUND DELAY.....0 ms."
|
|---|
| 54 | W !," "
|
|---|
| 55 | W !,"At this point you will see ""Select or modify barcodes?"""
|
|---|
| 56 | W !,"Press [alt] then [E] to exit and save changes."
|
|---|
| 57 | W !,"or"
|
|---|
| 58 | W !,"Hold [ctrl] and press [Z] to exit without saving changes."
|
|---|
| 59 | W !," "
|
|---|
| 60 | 33 D WAIT G Q:$D(ERR)
|
|---|
| 61 | W !," "
|
|---|
| 62 | W !,"TO DOWNLOAD to the TRAKKER or to UPLOAD to DHCP, new entries must be made"
|
|---|
| 63 | W !,"in the TERMINAL TYPE and DEVICE files."
|
|---|
| 64 | W !," "
|
|---|
| 65 | W !,"TERMINAL TYPE"
|
|---|
| 66 | W !,"-------------"
|
|---|
| 67 | W !,"NAME : C-VT420 (9440)"
|
|---|
| 68 | W !,"FORM FEED : #"
|
|---|
| 69 | W !,"OPEN EXECUTE : W $C(0)"
|
|---|
| 70 | W !,"DESCRIPTION : TRAKKER 9440 TO AUX PORT OF VT420"
|
|---|
| 71 | W !,"OPEN PRINTER PORT : W $C(27)_"_"""[5i"""
|
|---|
| 72 | W !,"CLOSE PRINTER PORT : W $C(27)_"_"""4i"""
|
|---|
| 73 | W !,"RIGHT MARGIN : 80"
|
|---|
| 74 | W !,"PAGE LENGTH : 9999"
|
|---|
| 75 | W !," "
|
|---|
| 76 | 44 D WAIT G Q:$D(ERR)
|
|---|
| 77 | W !,"DEVICE"
|
|---|
| 78 | W !,"-------"
|
|---|
| 79 | W !,"NAME : TRAKKERSL"
|
|---|
| 80 | W !,"LOCATION : SLAVED 9440 FROM VT420 AUX PORT"
|
|---|
| 81 | W !,"MARGIN WIDTH : 80"
|
|---|
| 82 | W !,"PAGE LENGTH : 9999"
|
|---|
| 83 | W !,"MNEMONIC : TRAKKERSL"
|
|---|
| 84 | W !,"FORM FEED : #"
|
|---|
| 85 | W !,"BACK SPACE : $C(8)"
|
|---|
| 86 | W !,"SUB-TYPE : C-VT420 (9440)"
|
|---|
| 87 | W !,"TYPE : TERMINAL"
|
|---|
| 88 | W !,"$I : 0 (zero)"
|
|---|
| 89 | W !," "
|
|---|
| 90 | W !,"---------------------------------------------------------------------"
|
|---|
| 91 | Q K AN,ERR Q
|
|---|
| 92 | WAIT I $E(IOST)["C" W !,"Press <RET> to continue, or '^' to abort: " R AN:DTIME I AN="^"!('$T) S ERR=1 Q
|
|---|
| 93 | I $E(IOST)["C" W @IOF,"SET UP PROCEDURES",!
|
|---|
| 94 | Q
|
|---|
