source: WorldVistAEHR/trunk/r/LAB_SERVICE-LR-LS/LRWLST1.m@ 1604

Last change on this file since 1604 was 623, checked in by George Lilly, 15 years ago

revised back to 6/30/08 version
File size: 9.2 KB
Line 
1LRWLST1 ;DALOI/CJS/RWF/FHS - ACCESSION SETUP ; July 19, 2006
2 ;;5.2;LAB SERVICE;**48,65,121,153,261,286,331**;Sep 27, 1994;Build 7
3 ;
4 ; Reference to ^DIC(42 supported by IA #10039
5 ; Reference to ^SC( supported by IA #10040
6 ;
7 S LRWLC=0
8 F S LRWLC=$O(LRTSTS(LRWLC)) Q:LRWLC<1 S LRAD=DT D SPLIT
9 ;
10 ; If LEDI and comments came with order then copy to order in #69
11 I $G(LRORDRR)="R",$G(LR696),$D(^LRO(69.6,LR696,99)) D
12 . N LRDIE
13 . D WP^DIE(69.01,LRSN_","_LRODT_",",16,"A","^LRO(69.6,LR696,99)","LRDIE(16)")
14 ;
15 K DIC,DLAYGO,DR,DA,DIE,LRIXX
16 Q:$G(LRORDR)="P"
17 K LRNM,LRTSTS
18 K ^TMP("LR",$J,"TMP")
19 Q
20 ;
21SPLIT ;
22 N LRAA,LRX
23 ; Setup regular accessions (LRUNQ=0)
24 S LRUNQ=0,LREND=0
25 I $D(LRTSTS(LRWLC,0)) D
26 . D GTWLN
27 . I LREND Q
28 . S LRAA=0
29 . F S LRAA=$O(LRTSTS(LRWLC,0,LRAA)) Q:LRAA<1 D
30 . . S LRSS=LRTSTS(LRWLC,0,LRAA)
31 . . D STWLN,ST2,^LRWLST11,EN^LA7ADL(LRUID)
32 . D SICA^LRWLST11
33 ;
34 ; Setup accessions requiring 'unique' accession numbers (LRUNQ=1)
35 S LRUNQ=1,LRAA=0
36 F S LRAA=$O(LRTSTS(LRWLC,1,LRAA)) Q:LRAA<1 D
37 . S LRSS=LRTSTS(LRWLC,1,LRAA)
38 . F D GTWLN Q:LREND D Q:$O(LRTSTS(LRWLC,1,LRAA,0))<1
39 . . D STWLN,ST2,^LRWLST11,EN^LA7ADL(LRUID),SICA^LRWLST11
40 Q
41 ;
42 ;
43STWLN ; Set accession number
44 ;
45 D GETLOCK(LRAA,LRAD)
46 D CHECK68(LRAA,LRAD)
47 ;
48 S LRDPF=$P(^LR(LRDFN,0),U,2),DFN=$P(^(0),U,3)
49 ;
50 ; Handle 'in common' area that was not setup in GTWLN call.
51 I '$D(^LRO(68,LRAA,1,LRAD,1,LRAN)) D SETAN(LRAA,LRAD,LRAN)
52 ;
53 S LREND=0,LRLBLBP=1-$P(LRSS,U,2),LRSS=$P(LRSS,U)
54 S LRACC=$P(^LRO(68,LRAA,0),U,11)_" "_$S(LRAD["0000":$E(LRAD,2,3),1:$E(LRAD,4,7))_" "_LRAN
55 ;
56 S LRPRAC=""
57 I $D(^LRO(69,LRODT,1,LRSN,0)) S LRPRAC=$P(^(0),U,6) S:$D(LRNT) ^(3)=LRNT
58 ;
59 ; Location type
60 S LRCAPLOC=$P($G(^SC(+LROLLOC,0)),U,3)
61 I LRCAPLOC="" S LRCAPLOC="Z"
62 ;
63 ; File information in file #68 for this accession
64 N FDA,LR6802,LRDIE
65 S LR6802=LRAN_","_LRAD_","_LRAA_","
66 S FDA(1,68.02,LR6802,.01)=LRDFN
67 S FDA(1,68.02,LR6802,1)=LRDPF
68 S FDA(1,68.02,LR6802,2)=LRAD
69 S FDA(1,68.02,LR6802,3)=LRODT
70 S FDA(1,68.02,LR6802,4)=LRSN
71 S FDA(1,68.02,LR6802,6)=LRLLOC
72 S X=$G(^LRO(69,LRODT,1,LRSN,.1)) I X'="" S FDA(1,68.02,LR6802,14)=X
73 ;
74 ; No ordering provider/location on controls
75 I LRDPF'=62.3 D
76 . S FDA(1,68.02,LR6802,6.5)=LRPRAC
77 . S FDA(1,68.02,LR6802,94)=LROLLOC
78 ;
79 ; Only store treating specialty on file #2 patients
80 ; If no treating specialty then use specialty from file #44 location
81 I LRDPF=2 D
82 . S LRTREA=$P($G(^DPT(DFN,.103)),U)
83 . I 'LRTREA S LRTREA=$P($G(^SC(+LROLLOC,0)),U,20)
84 . I LRTREA S FDA(1,68.02,LR6802,6.6)=LRTREA
85 ;
86 S FDA(1,68.02,LR6802,6.7)=DUZ
87 S FDA(1,68.02,LR6802,15)=LRACC
88 S FDA(1,68.02,LR6802,26)=DUZ(2)
89 S FDA(1,68.02,LR6802,92)=LRCAPLOC
90 ;
91 D FILE^DIE("","FDA(1)","LRDIE(1)")
92 I $D(LRDIE(1)) D MAILALRT
93 ;
94 ; If specimen defined then set nodes, force to ien=1 since many lab
95 ; routines expect the specimen to be record number 1.
96 I $G(LRSPEC) D
97 . N FDAIEN
98 . S FDAIEN(1)=1
99 . S FDA(2,68.05,"+1,"_LR6802,.01)=LRSPEC
100 . S FDA(2,68.05,"+1,"_LR6802,1)=$P(LRSAMP,";",1)
101 . D UPDATE^DIE("","FDA(2)","FDAIEN","LRDIE(2)")
102 . I $D(LRDIE(2)) D MAILALRT
103 ;
104 ; If no specimen defined then use specimen values from file #69.
105 I $G(LRSPEC)="",$D(^LRO(69,LRODT,1,LRSN,4,0)) D
106 . N FDA,FDAIEN,LRI,LRX
107 . S LRI=0
108 . F S LRI=$O(^LRO(69,LRODT,1,LRSN,4,LRI)) Q:'LRI D
109 . . S FDAIEN(1)=LRI,LRX=$G(^LRO(69,LRODT,1,LRSN,4,LRI,0))
110 . . S FDA(LRI,68.05,"+1,"_LR6802,.01)=$P(LRX,"^")
111 . . D UPDATE^DIE("","FDA(LRI)","FDAIEN","LRDIE(LRI)")
112 . . I $D(LRDIE(LRI)) D MAILALRT
113 ;
114 ; Create UID.
115 S LRUID=$$LRUID^LRX(LRAA,LRAD,LRAN)
116 ;
117 I '$D(LRPHSET),('$G(LRQUIET)) W !!,"ACCESSION: ",LRACC," <",LRUID,">"
118 ;
119 D UPD696
120 ;
121 L -^LRO(68,LRAA,1,LRAD,1,0)
122 Q
123 ;
124 ;
125UPD696 ; Update file #69.6 if LEDI referral patient and no existing entry
126 K LR696IEN
127 I $G(LRORDRR)="R" D
128 . S LR696IEN=0
129 . I $G(LRRSITE("SMID"))'="",$G(LRSD("RUID"))'="" S LR696IEN=+$O(^LRO(69.6,"AD",LRRSITE("SMID"),LRSD("RUID"),0))
130 . I LR696IEN Q
131 . I '$G(LRRSTAT(0)) S LRRSTAT(0)=$$FIND1^DIC(64.061,"","OMX","Specimen in process","","I $P(^LAB(64.061,Y,0),U,7)=""U""")
132 . D PSET^LRPEND(SSN(2),+LRRSITE("RSITE"),LRSD("RUID"),+LRSD("RPSITE"),LRSPEC,LRSAMP,LRRSTAT(0),LRODT,$P(LRCDT,U),LRRSITE("SDT"),LRNT,.LROT)
133 Q
134 ;
135 ;
136ST2 ; Find next available node in LR global
137 ;
138 N FDA,FDAIEN,LRDIE,LRX,LRXIDT
139 ;
140 ; Autopsy ("AU") is not a mulitple - do not attempt to set in ^LR global
141 I LRSS="AU" S LRIDT=0 Q
142 ;
143 S LRIDT=0
144 F D Q:LRIDT
145 . S LRXIDT=9999999-LRCDT
146 . L +^LR(LRDFN,LRSS,LRXIDT,0):5
147 . I '$T S LRCDT=$$FMADD^XLFDT(LRCDT,0,0,0,1) Q
148 . I '$D(^LR(LRDFN,LRSS,LRXIDT,0)) S LRIDT=LRXIDT Q
149 . L -^LR(LRDFN,LRSS,LRXIDT,0)
150 . S LRCDT=$$FMADD^XLFDT(LRCDT,0,0,0,1)
151 ;
152 ; Create entry in appropriate subscript in LAB DATA file (#63).
153 S LRX=$S(LRSS="CH":63.04,LRSS="MI":63.05,LRSS="BB":63.01,LRSS="SP":63.08,LRSS="CY":63.09,LRSS="EM":63.02,1:0)
154 S FDAIEN(1)=LRIDT
155 S FDA(63,LRX,"+1,"_LRDFN_",",.01)=LRCDT
156 S FDA(63,LRX,"+1,"_LRDFN_",",.06)=LRACC
157 I LRSS'="CH" S FDA(63,LRX,"+1,"_LRDFN_",",.1)=LRNT
158 I LRSS="CH" S FDA(63,LRX,"+1,"_LRDFN_",",.12)=3
159 I LRSS="MI" S FDA(63,LRX,"+1,"_LRDFN_",",38)=3
160 I LRX D UPDATE^DIE("","FDA(63)","FDAIEN","LRDIE(63)")
161 I $D(LRDIE(63)) D MAILALRT
162 ;
163 ; Uncomment following code when new field .9 in"MI" subscript is released
164 ;I LRSS="MI" D
165 ;. N LRN,ERR,IENS
166 ;. S IENS=LRIDT_","_LRDFN_",",LRN=0
167 ;. F S LRN=$O(^LRO(69,LRODT,1,LRSN,2,LRN)) Q:LRN<1 D
168 ;. . I '$D(^LRO(69,LRODT,1,LRSN,2,LRN,1,0)) Q
169 ;. . D WP^DIE(63.05,IENS,.9,"A","^LRO(69,"_LRODT_",1,"_LRSN_",2,"_LRN_",1)","ERR")
170 ;
171 L -^LR(LRDFN,LRSS,LRIDT,0)
172 ;
173 Q
174 ;
175 ;
176GTWLN ;
177 N X
178 ;
179 ; Execute accession transform for this area.
180 S LRAN=0
181 S X=$G(^LRO(68,LRWLC,.1)) X:X'="" X
182 ;
183 D GETLOCK(LRWLC,LRAD)
184 D CHECK68(LRWLC,LRAD)
185 ;
186 S:'LRAN LRAN=1+$P($G(^LRO(68,LRWLC,1,LRAD,1,0)),U,3)
187 ;
188 I "CYEMSP"'[LRSS F Q:'$D(^LRO(68,LRWLC,1,LRAD,1,LRAN)) S LRAN=LRAN+1
189 ;
190 ; check for AP Accessions
191 I "CYEMSP"[LRSS F Q:'$D(^LRO(68,LRWLC,1,LRAD,1,LRAN))&'$D(^LR("A"_LRSS_"A",$E(LRAD,1,3),LRAN)) S LRAN=LRAN+1
192 ;
193 I '$D(LRPHSET),$D(LRNCWL)!$P(^LAB(69.9,1,0),U,8) D ASK Q:LREND
194 ;
195 D SETAN(LRWLC,LRAD,LRAN)
196 ;
197 L -^LRO(68,LRWLC,1,LRAD,1,0)
198 Q
199 ;
200 ;
201ASK ;
202 ; Don't ask if tasked or a "silent" call
203 I $D(ZTQUEUED)!($G(LRQUIET)) Q
204 ;
205 N DIR,DIROUT,DIRUT,DTOUT,DUOUT,LROK,LRANX,X,Y
206 S LROK=0
207 F D Q:LREND!(LROK)
208 . K DIR
209 . S DIR(0)="NO^1:"_$S($P(LRLABKY,U,2):999999,1:LRAN)_":0"
210 . S DIR("A")="Force to",DIR("B")=LRAN
211 . D ^DIR
212 . I $D(DIRUT) S LREND=1 Q
213 . S LRANX=Y
214 . I LRANX<+$P($G(^LRO(68,LRWLC,1,LRAD,1,0)),U,3) D
215 . . W !,"This accession number may be already assigned either in this "
216 . . W !,"area or a common accession area."
217 . I $D(^LRO(68,LRWLC,1,LRAD,1,LRANX,0)) D Q:'LROK
218 . . N LRDFNX S LRDFNX=LRDFN
219 . . N DFN,LRDFN,LRDPF,PNM,SSN
220 . . S LRDFN=+^LRO(68,LRWLC,1,LRAD,1,LRANX,0),LRDPF=$P(^LR(LRDFN,0),U,2),DFN=$P(^LR(LRDFN,0),U,3)
221 . . D PT^LRX
222 . . W !,"THIS NUMBER BELONGS TO ",!,PNM," SSN: ",SSN
223 . . D INF^LRX
224 . . I LRDFN=LRDFNX S LROK=1
225 . K DIR
226 . S DIR(0)="YO",DIR("A")="Are you sure",DIR("B")="NO"
227 . D ^DIR
228 . I $D(DIRUT) S LREND=1 Q
229 . I Y=1 S LRAN=LRANX,LROK=1
230 ;
231 ; Unlock if aborting.
232 I LREND L -^LRO(68,LRWLC,1,LRAD,1,0)
233 ;
234 Q
235 ;
236 ;
237CHECK68(LRAA,LRAD) ; Check for/set header node of ^LRO(68) 68.01 subfile.
238 ;
239 ; Call with LRAA = ien of entry in file #68
240 ; LRAD = accession date in fileman format
241 ;
242 ; Set accession date in file #68 for this acession.
243 ; Check for existence of accession number multiple but not accession date multiple,
244 ; FileMan DBS call fails when accession number multiple exists but accession date multiple does not.
245 ; If this condition found then set missing node directly and quit.
246 ;
247 I '$D(^LRO(68,LRAA,1,LRAD,0)) D
248 . N FDA,FDAIEN,LRDIE,X
249 . S X=$Q(^LRO(68,LRAA,1,LRAD,0))
250 . I X'="",$QS(X,4)=LRAD S $P(^LRO(68,LRAA,1,LRAD,0),"^")=LRAD Q
251 . S (FDAIEN(1),FDA(1,68.01,"+1,"_LRAA_",",.01))=LRAD
252 . D UPDATE^DIE("","FDA(1)","FDAIEN","LRDIE(1)")
253 . I $D(LRDIE(1)) D MAILALRT
254 ;
255 Q
256 ;
257 ;
258GETLOCK(LRAA,LRAD) ; Obtain lock on zeroth node of this accession date
259 ; Call with LRAA = ien of entry in file #68
260 ; LRAD = accession date in fileman format
261 ;
262 F L +^LRO(68,LRAA,1,LRAD,1,0):10 Q:$T D
263 . I $D(ZTQUEUED)!($G(LRQUIET)) Q
264 . W !!?5,"Accession area ",$P(^LRO(68,LRAA,0),"^")," is locked by another user.",!,$C(7)
265 Q
266 ;
267 ;
268SETAN(LRAA,LRAD,LRAN) ; Create stub entry in file #68 for this acession.
269 ;
270 ; Call with LRAA = ien of entry in file #68
271 ; LRAD = accession date in fileman format
272 ; LRAN = accession number
273 ;
274 N FDA,FDAIEN,LR6802,LRDIE
275 ;
276 S LR6802=LRAD_","_LRAA_","
277 S FDAIEN(1)=LRAN
278 S FDA(2,68.02,"+1,"_LR6802,.01)=LRDFN
279 D UPDATE^DIE("","FDA(2)","FDAIEN","LRDIE(2)")
280 I $D(LRDIE(2)) D MAILALRT
281 Q
282 ;
283 ;
284MAILALRT ; Send mail message alert when FileMan DBS errors returned
285 ;
286 N J,LR68,LRCNT,LRMTXT,X,XMINSTR,XMSUB,XMTO
287 ;
288 I $D(^LRO(68,LRAA,1,LRAD,1,LRAN)) M LR68=^LRO(68,LRAA,1,LRAD,1,LRAN)
289 ;
290 S LRMTXT(1)="The following debugging information is provided to assist"
291 S LRMTXT(2)="support staff in resolving error during accessioning."
292 S LRMTXT(3)=" "
293 S LRCNT=3
294 ;
295 F J="FDA","FDAIEN","LR68","LRAA","LRAD","LRAN","LRDFN","LRDIE","LRSS","LRTSTS","LRUNQ","LRWLC","XQY","XQY0" D
296 . S X=$G(@J)
297 . I X'="" S LRCNT=LRCNT+1,LRMTXT(LRCNT)=J_"="_X
298 . F S J=$Q(@J) Q:J="" S LRCNT=LRCNT+1,LRMTXT(LRCNT)=J_"="_@J
299 ;
300 S XMSUB="FileMan DBS call failed during accessioning in routine LRWLST1"
301 S XMTO("G.LMI")=""
302 S XMINSTR("FROM")=.5
303 S XMINSTR("ADDR FLAGS")="R"
304 D SENDMSG^XMXAPI(DUZ,XMSUB,"LRMTXT",.XMTO,.XMINSTR)
305 Q
Note: See TracBrowser for help on using the repository browser.