source: WorldVistAEHR/trunk/r/ORDER_ENTRY_RESULTS_REPORTING-OR-OCX--ORRC--ORRJ/ORWDBA3.m@ 1476

Last change on this file since 1476 was 623, checked in by George Lilly, 15 years ago

revised back to 6/30/08 version
File size: 8.6 KB
RevLine 
[623]1ORWDBA3 ; SLC/GSS Billing Awareness (CIDC) [8/20/03 9:19am]
2 ;;3.0;ORDER ENTRY/RESULTS REPORTING;**190,195**;Dec 17, 1997
3 ;
4ORFMDAT(ORDFN) ; Return date in FM format regarding order for CSV/CTD/HIPAA
5 ; Pass in Order IEN
6 Q ($P($G(^OR(100,ORDFN,8,1,0)),"^",16)\1)
7 ;
8DISPLAY ; Display of BA data from original copied order (ORIT = ORIEN)
9 ; Displayed in window with all order info and user can accept/edit
10 ; Note: TxF = Treatment Factor
11 ; BA data (Dx,TxF's) not editable but in signature window, not in above
12 ; ORIT defined in ORWDXM1, DISPLAY called from ORWDXM2
13 ;
14 ; Input:
15 ; ORIT, ILST, and LST() from ORWDXM* routines
16 ; Output:
17 ; ILST and LST() appropriately incremented/populated for order display
18 ; Variables:
19 ; CUN = TxF's in C, U, or N format
20 ; I = counter
21 ; ILST = line counter, initially from ORWDXM* routines
22 ; LST() = array of lines to output, initially from ORWDXM* routines
23 ; NTF = # of Treatment Factors
24 ; ORITARY = ORIT array of 1 needed to access GETTFCI^ORWDBA4
25 ; SPCS = # of characters to space to left of ':'
26 ; TF1 = first TxF output? (0/1)
27 ; TFGBL = TxF's in Global stored order
28 ; TFGUI = TxF's in GUI returned order
29 ; TFV = TxF verbiage
30 ;
31 N CUN,I,NTF,ORITARY,SPCS,TF1,TFGBL,TFGUI,TFV,Y
32 S NTF=7,SPCS=28,ORITARY(1)=+ORIT
33 ; Get Y(+ORIT) string in ORIEN^CUUUCCN^Dx1^Desc1^Dx2^Desc2^... format
34 D GETTFCI^ORWDBA4(.Y,.ORITARY)
35 S CUN=$P($G(Y(1)),U,2) ;CUN = Treatment Factors in CUN syntax
36 ; First output Diagnosis information - if any
37 F I=3:2:9 I $P($G(Y(1)),U,I)'="" D
38 . S ILST=ILST+1,LST(ILST)=$S(I=3:"Diagnoses",1:"")
39 . S LST(ILST)=LST(ILST)_":"_$P(Y(1),U,I)_" - "_$P(Y(1),U,I+1)
40 . D FRMTLST
41 ; Get GUI and GBL Treatment Factor sequence strings
42 D TFSTGS^ORWDBA1
43 ; Assumes SC will always be first in sequence! - not likely to change
44 S ILST=ILST+1
45 S LST(ILST)="Service Connected:"_$S($E(CUN)="C":"YES",1:"NO")
46 D FRMTLST
47 S ILST=ILST+1,LST(ILST)="Treatment Factors:"
48 ; If no TxF's (no 'C'hecked) {SC output above} then output '<none>'
49 I '$F($E(CUN,2,NTF),"C") S LST(ILST)=LST(ILST)_"<none>" D FRMTLST Q
50 S TF1=0 ;No TxF yet output
51 ; Verbiage for TxF's
52 S TFV("MST")="MILITARY SEXUAL TRAUMA",TFV("AO")="AGENT ORANGE"
53 S TFV("IR")="IONIZING RADIATION",TFV("EC")="ENVIRONMENTAL CONTAMINANTS"
54 S TFV("HNC")="HEAD AND NECK CANCER",TFV("CV")="COMBAT VETERAN"
55 ; Output Checked TxF's
56 F I=2:1:NTF I $E(CUN,I)="C" D
57 . I 'TF1 S LST(ILST)=LST(ILST)_TFV($P(TFGUI,U,I)),TF1=1 D FRMTLST Q
58 . S ILST=ILST+1,LST(ILST)=":"_TFV($P(TFGUI,U,I)) D FRMTLST
59 Q
60 ;
61FRMTLST ; Format the variable LST(ILST) for DISPLAY tag
62 S LST(ILST)=$J($P(LST(ILST),":"),SPCS)_": "_$P(LST(ILST),":",2)
63 Q
64 ;
65HINTS(Y) ; Return HINTS for ORBA Treatment Factors - used by Delphi
66 ; The hints returned in the Y array will be used in the CPRS GUI and
67 ; displayed on fly-over of the cursor over the TxF text in the window
68 ;
69 ; Input
70 ; <none>
71 ; Output
72 ; Y array of the hints for TxF's> Y(#)=TxFA ^ TxF line # ^ hint text
73 ; where TxFA is Treatment Factor acronym, e.g., CV=Combat Veteran
74 ; Variables
75 ; CT = line number count, used in Y(#) where #=CT
76 ; I = incrementor index #
77 ; ORTFIEN = the IEN for the TxF in the Help Frame (^DIC(9.2)) file
78 ; TF = TxF acronym
79 ; TFLN = TxF text line number, e.g., ^DIC(9.2,ORTFIEN,1,TFLN,0)
80 ; TFS = string of TxF acronyms
81 ; TFV = TxF description/text
82 ;
83 N CT,I,ORTFIEN,TF,TFLN,TFS,TFV
84 ;
85 S TFS="SC^MST^AO^IR^EC^HNC^CV",CT=0
86 ; Get next TxF from TFS
87 F I=1:1 S TF=$P(TFS,U,I) Q:TF="" D
88 . S ORTFIEN=$O(^DIC(9.2,"B","ORBA-"_TF,"")),TFV="",TFLN=0
89 . ; Get next line of hint text
90 . F S TFLN=$O(^DIC(9.2,ORTFIEN,1,TFLN)) Q:'TFLN D
91 .. S CT=CT+1,Y(CT)=TF_U_TFLN_U_^DIC(9.2,ORTFIEN,1,TFLN,0)
92 Q
93 ;
94DG1(ORDFN,COUNTER,CTVALUE) ; Create DG1 segment(s) & make call for ZCL seg.
95 ;
96 ; Input
97 ; ORDFN Internal Order ID#
98 ; COUNTER Variable used as counter from calling routine
99 ; CTVALUE Value of COUNTER when DG1 called
100 ; Output
101 ; DG1 & ZCL HL7 segments
102 ;
103 I $$BASTAT^ORWDBA1=0 Q ;BA not used
104 N DG13,DXIEN,DXR,DXV,FROMFILE,ICD9,OCT,OREC,ORFMDAT
105 ; zero order count variable
106 S OCT=0
107 ; Get the date of order (for CSV/CTD usage)
108 S ORFMDAT=$$ORFMDAT(ORDFN)
109 ; Get the diagnoses for an order
110 F S OCT=$O(^OR(100,ORDFN,5.1,OCT)) Q:OCT'?1N.N D
111 . S OREC=^OR(100,ORDFN,5.1,OCT,0)
112 . S DXIEN=$P(OREC,U) ; DXIEN=pointer to diagnosis (ICD9) file #80
113 . ; the DXIEN pointer should point to a valid diagnosis (after all is
114 . ; was previously entered .. but just in case ...)
115 . S (DXV,ICD9)=""
116 . I DXIEN'="" D
117 .. S DXR=$$ICDDX^ICDCODE(DXIEN,ORFMDAT) Q:+DXR=-1
118 .. ; Get diagnosis verbiage and ICD code
119 .. S DXV=$P(DXR,U,4),ICD9=$P(DXR,U,2)
120 . S FROMFILE=80
121 . S DG13=DXIEN_U_DXV_U_FROMFILE_U_ICD9_U_DXV_U_"ICD9"
122 . S CTVALUE=CTVALUE+1
123 . S ORMSG(CTVALUE)="DG1"_"|"_OCT_"||"_DG13_"|||||||||||||"
124 . D ZCL
125 S @COUNTER=CTVALUE
126 Q
127 ;
128ZCL ;create all the ZCL segments (currently 7 TxF's) for order number OCT
129 ;
130 N I,J,TABLE,TF,TFGBL,TFGUI,TFTBL,TFIN,TFS,VALUE
131 D TFSTGS^ORWDBA1 ;set string sequence of treatment factors
132 ; TFS is TxF data in ^OR(100,ORIEN,5.2) order
133 S TFS=$G(^OR(100,ORDFN,5.2)),TABLE=""
134 ; conversion order from ^OR stored data and Table SD008 for HL7 msg
135 ; convert so that the ZCL segments will be in Table SD008 order (1-7)
136 F I=1:1:7 S TF=$P(TFTBL,U,I) F J=1:1:7 I $P(TFGBL,U,J)=TF S TABLE=TABLE_J Q
137 F TFIN=1:1:7 D
138 . ; ORMSG counter incremented
139 . S CTVALUE=CTVALUE+1
140 . ; TF VALUE=0 for no or 1 for yes (only if not req. is it null)
141 . S VALUE=$P(TFS,U,$E(TABLE,TFIN))
142 . I VALUE="?" S VALUE=0 ;temp fix if sending '?' to ancillary???
143 . ; for Table SD008: OCT=Set ID, SCIN=O/P Classif. Type, VALUE=Value
144 . S ORMSG(CTVALUE)="ZCL|"_OCT_"|"_TFIN_"|"_VALUE
145 Q
146 ;
147BDOSTR ;Store backdoor order DG1 and ZCL messages from HL7
148 ;Processes one order per entry into BDOSTR, e.g., ROUT(1)
149 ;Depends upon ORM* routines to set-up a number of variables including
150 ; ORMSG array and ORIFN.
151 ;ORM* routines calling BDOSTR: ORMGMRC, ORMLR, ORMPS, & ORMRA
152 ;
153 ; Input: HL7 messages and related data
154 ; Output: ROUT array in Delphi GUI format, i.e.
155 ; OrderIEN;11CNNNCNN^exDx1^exDx2^exDx3^exDx4
156 ;
157 ; Variables Used
158 ; DG1 = sequential numbered array with a value of DXIEN
159 ; I,J = counters
160 ; GUITF = GUI order treatment factors (TxF)
161 ; NDX = number of diagnoses being passed
162 ; NTF = number of TxF
163 ; OBX = @ORMSG Dx array element # (max of 4 diagnoses stored)
164 ; REC = set to sequential HL7 messages, contains HL7 message data
165 ; ROUT = record sent for storage processing to RCVORCI
166 ; TF = individual TxF values
167 ; TFGBL = TxF acronyms in ^ delimited string in ^OR sequence
168 ; TFGUI = TxF acronyms in ^ delimited string in from GUI sequence
169 ; TFTBL = TxF acronyms in ^ delimited string in Table SD008 sequence
170 ; VAL = individual TxF values
171 ; ZCL = TxF in Table SD008 format and sequence
172 ;
173 ; See if CIDC master switch set, if not then no DG1/ZCL seg, to store
174 I $$BASTAT^ORWDBA1=0 Q ;CIDC (nee BA) not used
175 ;
176 N CPNODE,CT,DG1,I,J,GUITF,NDX,NTF,OBX,REC,ROUT,ORSDCARY,SDCARYA
177 N TF,TFGBL,TFGUI,TFTBL,VAL,X,ZCL
178 ;
179 K ORSDCARY,SDCARYA
180 D TFSTGS^ORWDBA1 ;set string sequence of treatment factors
181 S (CT,NDX,OBX)=0,NTF=7,(CPNODE,GUITF,TF,Y,ZCL)="",X="T"
182 ; Call API to acquire Treatment Factors in force
183 D NOW^%DTC,CL^SDCO21(DFN,%,"",.ORSDCARY) ;DBIA 406
184 ; Retrved array order: AO,IR,SC,EC,MST,HNC,CV, e.g., ORSDCARY(3) for SC
185 ; Convert to character array, e.g., SDCARYA("SC")=""
186 F I=1:1:NTF S:$D(ORSDCARY(I)) SDCARYA($P("AO^IR^SC^EC^MST^HNC^CV",U,I))=""
187 ; Process only four DG1 segments and first set of ZCL segments
188 F S OBX=$O(@ORMSG@(OBX)) Q:OBX'>0 S J=$E(@ORMSG@(OBX),1,3) I J="DG1"!(J="ZCL"&($P(@ORMSG@(OBX),"|",2)=1)) D
189 . S REC=@ORMSG@(OBX)
190 . ; Setting DG1(#)=DXIEN where # is Dx sequence # (1=primary)
191 . I J="DG1"&(NDX<4) S DG1($P(REC,"|",2))=$P(REC,U,4),NDX=NDX+1 Q
192 . ; Create ZCL string of TxFs, e.g., 1101011
193 . I J="ZCL" D
194 .. S:$P(REC,"|",4)="" $P(REC,"|",4)=" "
195 .. S $E(ZCL,$P(REC,"|",3))=$P(REC,"|",4)
196 ; convert order and format from Table SD008 to GUI
197 F I=1:1:NTF S TF=$P(TFGUI,U,I) F J=1:1:NTF I $P(TFTBL,U,J)=TF D
198 . ; If patient does not have that Tx Factor (TF) then ghost in GUI ("N")
199 . I '$D(SDCARYA(TF)) S GUITF=GUITF_"N" Q
200 . ; If patient has TF then format for GUI (C=ck'd, U=unck'd, ?=not ans)
201 . S VAL=$E(ZCL,J),GUITF=GUITF_$S(VAL=1:"C",VAL=0:"U",1:"?")
202 ; Create output string in a format that can be stored by RCVORCI^ORWDBA1
203 S ROUT(1)=ORIFN_";11"_GUITF_U_$G(DG1(1))_U_$G(DG1(2))_U_$G(DG1(3))_U_$G(DG1(4))
204 ; Store diagnoses and treatment factors
205 D RCVORCI^ORWDBA1(Y,.ROUT)
206 Q
207 ;
208ERRMSG(VISIT) ; Error handling and message
209 ; to be determined
210 Q
Note: See TracBrowser for help on using the repository browser.