source: WorldVistAEHR/trunk/r/PROSTHETICS-RMPR-RMPO-RMPS/RMPRPI13.m@ 823

RMPRPI13 ;HIN/ODJ-PRINT BAR CODE LABELS ;2/09/01
 ;;3.0;PROSTHETICS;**61**;Feb 09, 1996
 ;
 Q
 ;
 ;***** SELP - Prompt for Bar Code printer
SELP(RMPRBCP,RMPREXC,RMPRQ,RMPRIOP) ;
 N POP
 S %ZIS("A")="Select Bar Code Printer: "
 S %ZIS("B")=""
 S %ZIS="QN" K IOP
 D ^%ZIS
 S RMPRQ=0
 S RMPREXC=""
 I POP S RMPREXC="P" G SELPX
 I '$D(IO("Q")) D  G SELPX
 . S RMPRBCP=$G(IOST)
 . S:RMPRBCP="" RMPREXC="^"
 . S RMPRIOP=$G(ION)
 . Q
 ;I '$D(IO("Q")) U IO D TEST G SELPX
 ;K IO("Q") S ZTDESC="SLAVE PRINT TEST"
 ;S ZTRTN="TEST^RMPRPI11",ZTIO=ION
 ;D ^%ZTLOAD W:$D(ZTSK) !,"REQUEST QUEUED!",! H 1 G SELPX
SELPX Q
TEST S IOP=ION,%ZIS="" D ^%ZIS
 W !!,"TESTING SLAVE DEVICE",!!
 W @IOF
 D ^%ZISC
 Q
 ;
 ; Print bar code for printer using ZPLII command set (ZEBRAS)
 ; applies to S600
ZPLII(RMPRBARC,RMPRITXT,RMPRNCOP) ;
 N RMPRUNIT,RMPRLTYP,RMPRLWID,RMPRLHGT,RMPRLRES,RMPRMMIN
 N RMPRXDIM,RMPRQUIZ,RMPRHCPC,RMPRBLEN,RMPRDT,RMPRBHGT,RMPRCRLF
 N RMPRLEFT,RMPRDOWN,RMPRLCNT
 S RMPRUNIT="MM"   ; use mm units
 S RMPRLTYP=""     ; <not used yet>
 S RMPRLWID=75     ; Lable width   75mm
 S RMPRLHGT=25    ; Label height 25mm
 S RMPRLRES=8     ; 8 dots/mm resolution
 S RMPRMMIN=25.333 ; mm to the inch conversion factor
 I '+$G(RMPRNCOP) S RMPRNCOP=1
 ;
 ; Set the X dimension in dots (width of narrow bar)
 ; minimum recommended X dimension is .19mm (7.5/1000th inch)
 I RMPRUNIT="MM" D
 . S RMPRXDIM=RMPRLRES*.19
 . Q
 I RMPRUNIT="IN" D
 . S RMPRXDIM=RMPRLRES*.0075
 . Q
 S:RMPRXDIM'=(RMPRXDIM\1) RMPRXDIM=1+(RMPRXDIM\1)
 ;
 ; Calculate the quiet zone in dots
 ; this should be greater of 10 X dimensions or 2.5333 mm (.1 inch)
 I RMPRUNIT="MM" D
 . S RMPRQUIZ=((2.5333*RMPRLRES)\1)+1
 . S:RMPRQUIZ<(10*RMPRXDIM) RMPRQUIZ=10*RMPRXDIM
 . Q
 I RMPRUNIT="IN" D
 . S RMPRQUIZ=((.1*RMPRLRES)\1)+1
 . S:RMPRQUIZ<(10*RMPRXDIM) RMPRQUIZ=10*RMPRXDIM
 . Q
 ;
 ; Calculate length (in dots) of symbol to be printed
 ; Symbol is [HCPCS code][-][Date and Time]
 ; [HCPCS code] and [-] will be alphanumeric
 ; [Date and Time] will be numeric using code C
 S RMPRHCPC=$P(RMPRBARC,"-",1)
 S RMPRBLEN=((11*($L(RMPRHCPC)+5))+35)*RMPRXDIM
 S RMPRDT=$P(RMPRBARC,"-",2)
 S RMPRBLEN=RMPRBLEN+(((5.5*($L(RMPRDT)))+35)*RMPRXDIM)
 ;
 ; Calculate bar height in dots
 ; this should be .15 times symbol length or .25 inches
 I RMPRUNIT="MM" D
 . S RMPRBHGT=((6.33325*RMPRLRES)\1)+1
 . S:RMPRBHGT<(((.15*RMPRBLEN)\1)+1) RMPRBHGT=1+((.15*RMPRBLEN)\1)
 . Q
 I RMPRUNIT="IN" D
 . S RMPRBHGT=((.25*RMPRLRES)\1)+1
 . S:RMPRBHGT<(((.15*RMPRBLEN)\1)+1) RMPRBHGT=1+((.15*RMPRBLEN)\1)
 . Q
 ;
 ; *** Print the symbol ***
 S RMPRCRLF=$C(13)_$C(10)
 S RMPRLCNT=0
ZPLIIP W "^XA",RMPRCRLF
 W "^LH"_RMPRQUIZ_","_RMPRQUIZ,RMPRCRLF
 W "^BY"_RMPRXDIM_",3.0,"_RMPRBHGT,RMPRCRLF
 S RMPRLEFT=RMPRQUIZ
 S RMPRDOWN=RMPRQUIZ\2
 ;
 ; the BAR CODE
 W "^FO"_RMPRLEFT_","_RMPRDOWN_","_"^BCN,"_RMPRBHGT_",Y,N,N,A^FD"_RMPRBARC_"^FS",RMPRCRLF
 S RMPRDOWN=RMPRDOWN+((1.4*RMPRBHGT)\1)
 ;
 ; Description fields
 W "^FO"_RMPRLEFT_","_RMPRDOWN,RMPRCRLF
 W "^AC^FD"_$E(RMPRITXT("ITEM")_$J("",15),1,15)_$E("$ "_RMPRITXT("UNIT PRICE")_$J("",15),1,15)_RMPRITXT("DATE")_"^FS",RMPRCRLF
 S RMPRDOWN=RMPRDOWN+1+RMPRQUIZ
 W "^FO"_RMPRLEFT_","_RMPRDOWN,RMPRCRLF
 W "^AB^FD"_RMPRITXT("MASTER DESC")_"^FS",RMPRCRLF
 S RMPRDOWN=RMPRDOWN+1+(RMPRQUIZ\1.5)
 W "^FO"_RMPRLEFT_","_RMPRDOWN,RMPRCRLF
 W "^AB^FD"_RMPRITXT("ITEM DESC")_"^FS",RMPRCRLF
 S RMPRDOWN=RMPRDOWN+1+(RMPRQUIZ\1.5)
 W "^FO"_RMPRLEFT_","_RMPRDOWN,RMPRCRLF
 W "^AB^FD"_RMPRITXT("VENDOR")_"^FS",RMPRCRLF
 ;
 ; finish
 W "^XZ",RMPRCRLF
 S RMPRLCNT=1+RMPRLCNT
 I RMPRLCNT<RMPRNCOP G ZPLIIP
ZPLIIX Q