source: WorldVistAEHR/trunk/r/QUASAR-ACKQ/ACKQCDD.m@ 1141

Last change on this file since 1141 was 613, checked in by George Lilly, 15 years ago

initial load of WorldVistAEHR

File size: 6.9 KB
Line 
1ACKQCDD ;AUG/JLTP BIR/PTD HCIOFO/AG -Generate A&SP Service CDR for a Division; [ 03/03/98 3:10 PM ]
2 ;;3.0;QUASAR;;Feb 11, 2000
3 ;Per VHA Directive 10-93-142, this routine SHOULD NOT be modified.
4 ;
5SITE ; check whether the CDR should be run for the site or for each Division
6 S ACKQCDR=$$GET1^DIQ(509850.8,"1,",.1,"I")
7 I ACKQCDR'="D" G EXIT ; parameter not set to Division
8 ;
9OPTN ;Introduce option.
10 W @IOF,!,"This option generates and prints the Audiology and"
11 W !,"Speech Pathology Service Cost Distribution Report"
12 W !,"for a single Division.",!
13 ;
14 K ^TMP("ACKQCDD",$J)
15 ;
16 ; prompt for Division
17 S ACKDIV=$$DIV^ACKQUTL2(1,.ACKDIVX,"AI")
18 S ACKDIV=$O(ACKDIVX(""))
19 ; if no division selected then exit
20 I +ACKDIV=0 G EXIT
21 ; ask if data is to be saved
22 ; returns ACKSAV
23 D SAVE G:$D(DIRUT) EXIT
24 ; get the date range
25 ; returns ACKSD and ACKED and ACKXRNG
26 D DATES G:$D(DIRUT) EXIT
27 ;
28HRS ; calculate the total clinic hours
29 D CLINH^ACKQCDD2
30 ; if no hours found, ask user if they want to proceed.
31 I '(ACKTCH+ACKTSH),'$$OK G EXIT
32 ;
33 ; display total clinic hours and total student hours
34 W !!,"Total Clinic Hours for ",ACKXRNG,": ",$J((ACKTCH+ACKTSH),0,2)
35 I ACKTSH D
36 . W !,"Of that total, ",$J(ACKTSH,0,2)," hours are Instructional Support (.12)."
37 . W !,"Remaining Clinic Hours: ",$J(ACKTCH,0,2)
38 ;
39 ; prompt for total paid hours
40 D TPH^ACKQCDD2 G:$D(DIRUT) EXIT S ACKRTH=ACKTPH
41 ;
42INPUT ;
43 ; ask user for flat values for Admin Support and Cont Education
44 S ACKCATI="E",ACKCAT="ADMIN SUPT (.13) & CONT ED (.14)"
45 D YNFLAT G:$D(DIRUT) EXIT
46 I ACKFLAT D FNH G:$D(DIRUT) EXIT
47 I 'ACKFLAT D G:$D(DIRUT) EXIT
48 .S ACKIC=0
49 .F S ACKIC=$O(^ACK(509850,"AT",ACKCATI,ACKIC)) Q:'ACKIC D Q:$D(DIRUT)
50 ..S ACKCDZ=^ACK(509850,ACKIC,0)
51 ..I +ACKCDZ'[.12 D INDCAT^ACKQCDD2(ACKIC) Q:$D(DIRUT)
52 ;
53 ; ask user for flat values for Research
54 S ACKCATI="R",ACKCAT="RESEARCH"
55 D YNFLAT G:$D(DIRUT) EXIT
56 I ACKFLAT D FNH G:$D(DIRUT) EXIT
57 I 'ACKFLAT D G:$D(DIRUT) EXIT
58 .S ACKIC=0
59 .F S ACKIC=$O(^ACK(509850,"AT",ACKCATI,ACKIC)) Q:'ACKIC D Q:$D(DIRUT)
60 ..S ACKCDZ=^ACK(509850,ACKIC,0)
61 ..I +ACKCDZ'[.12 D INDCAT^ACKQCDD2(ACKIC) Q:$D(DIRUT)
62 ;
63PASS ; now do Pass-through accounts
64 W !!,"Now for pass through CDR accounts..."
65 ;
66 ; prompt for each pass-through account until user exits
67 F D PASS^ACKQCDD2 I $D(DIRUT) K DIRUT Q
68 ;
69 ; calculate remaining hours
70 S ACKRTH=ACKRTH-(ACKTCH+ACKTSH)
71 ;
72 ; check there are no remaining hours if there are no clinic hours left
73 I 'ACKTCH,ACKRTH D G EXIT
74 . W !!,$C(7),"You have hours remaining but no clinic visits to which they can be"
75 . W !,"distributed! That won't work...",!!
76 ;
77 ; distribute remaining hours
78 I ACKRTH D DISREM^ACKQCDD2
79 ; convert values to percentages, index the file
80 D PERCENT^ACKQCDD2,INDEX^ACKQCDD2
81 ; if user wants values saved, then save them
82 D:ACKSAV SAVE^ACKQCDD2
83 ;
84 ; print the report
85DEV W !!,"The right margin for this report is 80."
86 W !,"You can queue it to run at a later time.",!
87 K %ZIS,IOP S %ZIS="QM",%ZIS("B")="" D ^%ZIS
88 I POP W !,"NO DEVICE SELECTED OR REPORT PRINTED." G EXIT
89 ; if queue selected then add job to queue
90 I $D(IO("Q")) D G EXIT
91 . K IO("Q")
92 . S ZTRTN="DQ^ACKQCDD",ZTDESC="QUASAR - Generate A&SP Service CDR"
93 . S ZTSAVE("ACK*")="",ZTSAVE("^TMP(""ACKQCDD"",$J,")=""
94 . D ^%ZTLOAD D HOME^%ZIS K ZTSK
95 ;
96DQ ; entry point if queued
97 U IO
98 D NOW^%DTC
99 S ACKPDT=$$NUMDT^ACKQUTL(%)_" at "_$$FTIME^ACKQUTL(%),ACKPG=0
100 D PRINT^ACKQCDD3
101 ;
102EXIT ; always exit here
103 K ACK2,ACKCAT,ACKCATI,ACKCDZ,ACKED,ACKFLAT,ACKIC,ACKLAYGO,ACKMO,ACKPDT
104 K ACKPG,ACKRTH,ACKSAV,ACKSD,ACKTCH,ACKTP,ACKTPH,ACKTSH,ACKXRNG,ACKDIV
105 K %,%I,%ZIS,CDR,D,D0,DA,DIC,DIE,DI,DIK,DIR,DIRUT,DQ,DR,DTOUT,DUOUT
106 K HD,I,M,NEWHD,SUB,X,X1,X2,Y,YN,ZTDESC,ZTRTN,ZTSAVE,ZTSK
107 K ACKQCDR,ACKVDIV,ACKCDRN,DLAYGO,ACKDIVX
108 K ^TMP("ACKQCDD",$J)
109 D:$E(IOST)="C" PAUSE^ACKQUTL D ^%ZISC S:$D(ZTQUEUED) ZTREQ="@"
110 ; W:$E(IOST)="C" @IOF D ^%ZISC S:$D(ZTQUEUED) ZTREQ="@"
111 Q
112SAVE ;
113 N DIR,X,Y
114SAVE2 K DTOUT,DUOUT,DIRUT,DIR
115 S DIR(0)="Y",DIR("A")="Save Report Data",DIR("B")="YES"
116 S DIR("?")="Answer YES or NO.",DIR("??")="^D SAVE^ACKQCDD1"
117 D ^DIR K DTOUT,DUOUT
118 I Y?1"^"1.E W !,"Jumping not allowed.",! G SAVE2
119 S ACKSAV=Y
120 Q
121DATES ;
122 N DIR,X,Y
123 I ACKSAV D MONTH Q
124DATES2 K DTOUT,DUOUT,DIRUT,DIR
125 S DIR(0)="SB^M:MONTH;D:DATE RANGE",DIR("B")="M"
126 S DIR("A")="Generate CDR for a (M)onth or a (D)ate Range"
127 S DIR("?")="Enter 'M' for MONTH or 'D' for DATE RANGE."
128 S DIR("??")="^D DATES^ACKQCDD1"
129 D ^DIR K DIR
130 I Y?1"^"1.E W !,"Jumping not allowed.",! G DATES2
131 Q:$D(DIRUT)
132 I Y="D" D RANGE Q
133MONTH S DIR(0)="D^::AEP",DIR("A")="Select Month and Year",DIR("B")=$$LM
134 S DIR("?")="^D HELP^%DTC",DIR("??")="^D MONTH^ACKQCDD1"
135 D ^DIR
136 I Y?1"^"1.E W !,"Jumping not allowed.",! G MONTH
137 Q:$D(DIRUT)
138 I '$E(Y,4,5) W !,$C(7),"Month Required!" G MONTH
139 I Y>DT W !,$C(7),"Can't run for future dates!",! G MONTH
140 S ACKSD=$E(Y,1,5)_"01",ACKED=$E(Y,1,5)_$$LD(Y),ACKMO=$E(Y,1,5)_"00"
141 S ACKXRNG=$$XDAT^ACKQUTL(ACKMO)
142 Q
143RANGE ;
144 S DIR(0)="D^::AEXP",DIR("A")="Select Starting Date"
145 S DIR("?")="^D HELP^%DTC",DIR("??")="^D STARTD^ACKQCDD1"
146 D ^DIR K DIR
147 I Y?1"^"1.E W !,"Jumping not allowed.",! G RANGE
148 Q:$D(DIRUT)
149 I Y>DT W !,$C(7),"Can't run for future dates!",! G RANGE
150 S ACKMO="",ACKSD=Y,ACKXRNG=$$XDAT^ACKQUTL(Y)_" to "
151ENDD S DIR(0)="D^::AEXP",DIR("A")="Select Ending Date"
152 S DIR("?")="^D HELP^%DTC",DIR("??")="^D ENDD^ACKQCDD1"
153 D ^DIR K DIR
154 I Y?1"^"1.E W !,"Jumping not allowed.",! G ENDD
155 Q:$D(DIRUT)
156 I Y>DT W !,"Can't run for future dates!",! G ENDD
157 I Y<ACKSD W !,"Can't be before Start Date!",! G ENDD
158 S ACKED=Y,ACKXRNG=ACKXRNG_$$XDAT^ACKQUTL(Y)
159 Q
160YNFLAT ;
161 N DIR,X,Y
162YNFLAT2 K DTOUT,DUOUT,DIRUT,DIR
163 S DIR(0)="Y",DIR("B")="NO",DIR("?")="Answer YES or NO."
164 S DIR("A")="Want to enter flat number of hours for "_ACKCAT
165 S DIR("??")="^D FLAT^ACKQCDD1"
166 D ^DIR
167 I Y?1"^"1.E W !,"Jumping not allowed.",! G YNFLAT2
168 S ACKFLAT=+Y
169 Q
170FNH ;
171 N DIR,X,Y
172FNH2 K DTOUT,DUOUT,DIRUT
173 S DIR(0)="N^0:"_ACKRTH,DIR("A")="Enter Hours"
174 S DIR("?")="^W !!,""Enter the number of hours you wish to spread over all of"",!,""the "",ACKCAT,"" accounts."""
175 D ^DIR
176 I Y?1"^"1.E W !,"Jumping not allowed.",! G FNH2
177 Q:$D(DIRUT)
178 S ACKRTH=ACKRTH-Y D SPREAD(Y,ACKCATI)
179 Q
180SPREAD(X,Y) ;
181 N C,I,ACKTMP,ACKCDZ
182 S (C,I)=0 F S I=$O(^ACK(509850,"AT",Y,I)) Q:'I S ACKCDZ=^ACK(509850,I,0) I +ACKCDZ'[.12 S C=C+1,ACKTMP(+ACKCDZ)=0
183 S I=0 F S I=$O(ACKTMP(I)) Q:'I S ^TMP("ACKQCDD",$J,"ACKH",I)=X/C
184 Q
185LM() ;RETURN EXTERNAL VALUE OF LAST MONTH
186 N X
187 S X(1)=$E(DT,1,3),X(2)=$E(DT,4,5)-1
188 I 'X(2) S X(2)=12,X(1)=X(1)-1
189 S X(2)=$$PAD^ACKQUTL(X(2),"R",2,"0") Q $$XDAT^ACKQUTL(X(1)_X(2)_"00")
190LD(M) ;RETURN LAST DATE OF MONTH M
191 N X,Y
192 S Y=$E(M,1,3)+1700,M=+$E(M,4,5),X="31^28^31^30^31^30^31^31^30^31^30^31"
193 S:(Y#4=0&(Y#100'=0))!(Y#100=0&(Y#400=0)) $P(X,U,2)=29 Q $P(X,U,M)
194OK(YN) ;
195 N DIR,DUOUT,DTOUT,DIRUT
196OK2 S DIR(0)="Y",DIR("B")="NO",DIR("A")="Is that ok"
197 S DIR("A",1)="There are no clinic hours for the specified date range!"
198 S DIR("?")="Answer YES to continue with CDR or NO to quit."
199 D ^DIR
200 I Y?1"^"1.E W !,"Jumping not allowed.",! G OK2
201 S:$D(DIRUT) Y=0
202 Q Y
Note: See TracBrowser for help on using the repository browser.