source: WorldVistAEHR/trunk/r/ZZOTHER/NVSMSG.m@ 702

Last change on this file since 702 was 613, checked in by George Lilly, 15 years ago

initial load of WorldVistAEHR

File size: 6.4 KB
Line 
1NVSMSG ;slcciofo/maw,mb-alert and messaging utility ;02:21 PM 19 Apr 2000
2 ;;2.0;NVS system management utility;**11,12,13**; Jan 01, 1999
3 ;
4 ; **NOTE: THIS ROUTINE IS USED ONLY ON INTERSYSTEMS CACHE SYSTEMS**
5 ;
6 ; This routine is invoked by various NVS system monitoring utilities
7 ; (for example, unattended backup, integrity check, etc.). It retrieves
8 ; the contents of the host file specified and places it in a mail message.
9 ; For Intersystems Cache, a CSTAT can be generated by this utility (see
10 ; further documentation below). If warranted, an alert can also be set
11 ; up by this utility (see documentation below).
12 ;
13EN(DIR,FILE,SUBJ,ALERT,CSTAT) ;
14 ;
15 ; DIR = the directory path where FILE will be found.
16 ; If DIR is passed = "", this module aborts.
17 ; FILE = the name of the host file to be retrieved and
18 ; included in the mail message.
19 ; SUBJ = a string (up to 30 characters) that will be used
20 ; as the message (and alert, if appropriate) subject.
21 ; Note: SUBJ will be truncated if $LENGTH>30
22 ; ALERT = pass = 1 if an alert is to be sent
23 ; CSTAT = pass = 1 and a CSTAT will be generated
24 ;
25 N DEVOK,ERRFLAG,I,LINENUM,MAILGRP,MSGNUM
26 S $ZT=$G(^%ZOSF("ERRTN"))
27 S U="^"
28 K ^TMP($J),^XTMP("NVSMSG")
29 I $G(SUBJ)="" S SUBJ="NVS SYSTEM PROCEDURE MESSAGE"
30 I $L(SUBJ)>30 S SUBJ=$E(SUBJ,1,30)
31 I FILE=""&(DIR'="") D
32 .I $ZV["OpenVMS" D Q
33 ..I DIR[":"&(DIR'["]") D Q
34 ...S FILE=$P(DIR,":",2)
35 ...S DIR=$P(DIR,":")_":"
36 ..I DIR["]" D Q
37 ...S FILE=$P(DIR,"]",2)
38 ...S DIR=$P(DIR,"]")_"]"
39 .I $ZV["Windows" D
40 ..S DIR=$TR(DIR,"/","\")
41 ..F I=1:1 Q:$P(DIR,"\",I)=""
42 ..S FILE=$P(DIR,"\",I-1)
43 ..S DIR=$P(DIR,FILE)
44 S ALERT=+ALERT
45 S CSTAT=+CSTAT
46 ;
47 I DIR=""!(FILE="") D Q
48 .S ^TMP($J,1)="An error occured during a system procedure."
49 .S ^TMP($J,2)="No log file was specified. Following is the"
50 .S ^TMP($J,3)="information that was provided by the calling"
51 .S ^TMP($J,4)="application:"
52 .S ^TMP($J,5)=" Host file directory: "_$S($G(DIR)'="":DIR,1:"not specified")
53 .S ^TMP($J,6)=" Host file name: "_$S($G(FILE)'="":FILE,1:"not specified")
54 .S ^TMP($J,7)=" Subject: "_$S($G(SUBJ)'="":SUBJ,1:"not specified")
55 .S ^TMP($J,8)="No other information is available. Please investigate."
56 .S MAILGRP=""
57 .I $$GROUP("IRM") S MAILGRP="G.IRM"
58 .I MAILGRP="" S MAILGRP=.5
59 .S MSGNUM=0
60 .D MAIL(SUBJ,MAILGRP,"^TMP("_$J_",",+$G(ALERT),.MSGNUM)
61 ;
62 S ^XTMP("NVSMSG",0)=$$DT^XLFDT_U_$$DT^XLFDT_U_"NVS Procedure Message"
63 ;
64 ; call Kernel to retrieve the log file contents and set the temporary
65 ; global for us...
66 S DEVOK=1
67 S DEVOK=$$FTG^%ZISH(DIR,FILE,"^XTMP(""NVSMSG"",1)",2,"OVF")
68 ;
69 ; if DEVOK is 0, then the log file couldn't be retrieved, or the
70 ; temporary global array could not be set. Set up the message to
71 ; relay this information...
72 I 'DEVOK D
73 .S ^TMP($J,1)="An error occured attempting to retrieve a specified host"
74 .S ^TMP($J,2)="file during a system process. Here is the information"
75 .S ^TMP($J,3)="specified by the calling utility:"
76 .S ^TMP($J,4)="Directory: "_$S(DIR'="":DIR,1:"not specified")
77 .S ^TMP($J,5)="File name: "_$S(FILE'="":FILE,1:"not specified")
78 .S ^TMP($J,6)="Subject: "_$S(SUBJ'="":SUBJ,1:"not specified")
79 ;
80 ; retrieve the text from the temporary global and put into our local array...
81 I DEVOK D
82 .S (ERRFLAG,LINENUM)=0
83 .F S LINENUM=$O(^XTMP("NVSMSG",LINENUM)) Q:'LINENUM!(ERRFLAG=1) D
84 ..S ^TMP($J,LINENUM)=^XTMP("NVSMSG",LINENUM)
85 ..I ^TMP($J,LINENUM)["WARNING"!(^TMP($J,LINENUM)["$ZE") S ERRFLAG=1
86 .;
87 .; check for ERRFLAG. if it = 1, then warnings and/or errors exist in
88 .; the log file. let's insert a line right at the top of the message text
89 .; indicating that fact...
90 .I +$G(ERRFLAG) D
91 ..S ^TMP($J,.1)="**********************>> WARNING <<***********************"
92 ..S ^TMP($J,.2)="* ERROR AND/OR WARNING MESSAGES EXIST IN THIS LOG FILE!! *"
93 ..S ^TMP($J,.3)="* RECOMMEND COMPLETE REVIEW OF THE LOG FILE AND *"
94 ..S ^TMP($J,.4)="* CORRECTIVE ACTION BE TAKEN IMMEDIATELY!! *"
95 ..S ^TMP($J,.5)="**********************************************************"
96 .;
97 .; if CSTAT, generate one and tell the recipients that we did that...
98 .I +$G(CSTAT) D
99 ..I $ZV["OpenVMS" S X=$ZF(-1,"@SYS$COMMON:[SYSMGR]CSTAT.COM")
100 ..I $ZV["Windows NT" S X=$ZF(-1,"T:\ANONYMOUS\CSTAT\CSTAT.CMD")
101 ..S ^TMP($J,.6)=" "
102 ..S ^TMP($J,.7)="NOTE!! THE CSTAT COMMAND FILE WAS CALLED AS A RESULT OF THIS PROBLEM."
103 ..S ^TMP($J,.8)="Please look for the CSTAT reports in "
104 ..I $ZV["OpenVMS" S ^TMP($J,.8)=^TMP($J,.8)_"USER$:[ANONYMOUS.CSTAT]"
105 ..I $ZV["Windows NT" S ^TMP($J,.8)=^TMP($J,.8)_"T:\ANONYMOUS\CSTAT\"
106 ..S ^TMP($J,.9)=" "
107 ;
108 ; send the mail message. NOTE: site can change the mail group to be looked
109 ; up ("IRM" is the default) by changing the mail group name in the following...
110 S MAILGRP=""
111 I $$GROUP("IRM") S MAILGRP="G.IRM"
112 I MAILGRP="" S MAILGRP=.5
113 S MSGNUM=0
114 D MAIL(SUBJ,MAILGRP,"^TMP("_$J_",",+$G(ALERT),.MSGNUM)
115 ;
116 ; if ALERT requested *and* message recipient is not POSTMASTER, set up the alert...
117 I +$G(ALERT)&(+MAILGRP'=.5) D ALERT(SUBJ_" Check mail message "_MSGNUM_".",MAILGRP)
118 ;
119 K ^TMP($J),^XTMP("NVSMSG")
120 Q
121 ;
122MAIL(MSGSUBJ,RECIP,TEXT,NVS,MSG) ; send e-mail...
123 ; MSGSUBJ = message subject
124 ; RECIP = mail group name (local and/or remote) or local user DUZ
125 ; TEXT = local or global array reference for the text to be included in the message.
126 ; Note: this reference must be in the form required by ^XMD -- for example:
127 ; TEXT="array("
128 ; TEXT="^TMP($J,"
129 ; NVS = if passed=1 then mail group G.CSAVANTI@FORUM.MED.VA.GOV added to recipients
130 ; MSG = passed by reference, returned as the message number (XMZ)
131 ;
132 N XMDUZ,XMSUB,XMTEXT,XMY,XMZ,XTEXT
133 S XMDUZ=.5
134 S XMSUB=MSGSUBJ
135 S XMY(RECIP)=""
136 I +$G(NVS)=1 S XMY("G.CSAVANTI@FORUM.MED.VA.GOV")=""
137 I TEXT'="" S XMTEXT=TEXT
138 I TEXT="" D
139 .S XTEXT(1)="NO TEXT WAS DEFINED FOR THIS MESSAGE"
140 .S XMTEXT="XTEXT("
141 D ^XMD
142 S MSG=XMZ
143 Q
144 ;
145ALERT(ASUBJ,RECIP) ; send a simple alert...
146 ; ASUBJ = alert subject (can be same as mail message subject)
147 ; RECIP = an individual local user or mail group to which the alert will be sent
148 ;
149 N DUZ,XQA,XQAID,XQAMSG
150 S DUZ=".5"
151 S XQA(RECIP)=""
152 S XQAID="NVS"_$J
153 S XQAMSG=ASUBJ
154 D SETUP^XQALERT
155 Q
156 ;
157GROUP(X) ; verify a specified mail group exists and that it has membership...
158 ; X = name of mail group (example: "IRM")
159 ; returns 0 if not found, 1 if found
160 N Y
161 S Y=+$O(^XMB(3.8,"B",X,0))
162 I Y'>0 Q 0
163 ; check for members in this group...
164 I $O(^XMB(3.8,Y,1,"B",""))="" Q 0
165 Q 1
Note: See TracBrowser for help on using the repository browser.