source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0012.txt@ 1582

Last change on this file since 1582 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 9.0 KB
RevLine 
[604]1English French Notes Complete/Exclude
2Do you want to delete
3FOR_FMT^1^1
4You must specify some fields into which to import data.
5FLD_DLM
6Enter the name of the host file that contains the data to be imported.
7These are the files in the
8You must choose a file before you can go to the Field Selection page.
9FLD_DEL
10You have specified a fixed length format for imported data.
11However, you have not entered field lengths for fields you have chosen.
12So, you must either delete all the fields entered so far
13or change the format to one that is not fixed length.
14Do you want to store the selected fields in an Import Template
15Do you want to proceed with the import
16If you answer 'YES', the import will occur now.
17If you answer 'NO', you will need to respecify the import criteria.
18Okay, you can do the import later.
19Following error messages were generated when import failed.
20Enter name for your import template. It should be 3-30 characters and it should not start with a punctuation character
21Name of Import Template:
22 Are you adding '
23' as a new Import Template
24An error occurred during the filing of the import template.
25No import template will be created.
26Import Template
27 already exists.
28Existing Import Template
29 has been deleted.
30Choose another template name.
31Do you want to replace the existing template with a new one
32If you answer 'YES', the existing template will be deleted.
33This routine will report any sort templates that have been corrupted due to
34a bug in FM21 that has been repaired by patch DI*21*9.
35If any templates are reported here, you can repair them by editing the template,
36without changing any of the sort fields.
37If none show on the report, it means that none of the templates on your system
38needed to be edited.
39Report corrupted sort templates
40Searching Sort Template file...please wait
41Report of templates that need to be repaired
42No.
43END_IXVALUES
44BEGIN_IXVALUES
45BEGIN_IENs
46END_IENs
47IXCNT=
48BEGIN_IDVALUES
49END_IDVALUES
50BEGIN_WIDVALUES
51END_WIDVALUES
52WORD-PROCESSING
53IENs
54No editing allowed.
55You cannot save changes at this level.
56To close the current page, press <PF1>C.
57This is a required
58Another entry already exists with this key value.
59DA,DDS1ND)
60No jumping allowed.
61No exit allowed, since navigation for the block is disabled.
62 not found.
63 is uneditable.
64DIR(
65Closing page...
66Since navigation for the block is disabled, that key sequence is disabled.
67Filing form
68DA,DDSND)
69DA,DDSOND)
70Please wait. Loading all pages ...
71Verifying ...
72Subfile:
73Record:
74 Key Field(s):
75Press RETURN to continue:
76DONE!
77CLONE FORM FROM
78Select FORM to clone:
79There are no blocks on this form.
80 BLOCKS USED ON FORM
81 Entry Number Block Name
82The new form and blocks must be given unique names.
83Give the new form and blocks the same names as the original,
84but a different namespace
85 Answer 'YES' if the original form and blocks are namespaced, and you want
86 the new forms and blocks to have a different namespace.
87Original namespace:
88 Enter the namespace of the original form and blocks
89 New namespace:
90 Enter the namespace of the new form and blocks
91Enter names for the new form and blocks.
92Original form name:
93 New form name:
94 Enter the name of the new form.
95 Invalid name.
96 Form with this name already exists.
97Original block name:
98 New block name:
99 Block with this name already exists.
100Creating new blocks ...
101Attempt to create block
102Creating new form ...
103Attempt to create form
104Repointing to new blocks ...
105Reindexing new form ...
106Ready to clone form
107 Enter 'Y' to clone form. Enter 'N' to exit.
108Close Refresh
109Close
110;n:NEXT PAGE
111Exit
112Save
113Next Page
114COMMAND:
115Enter a command or '^' followed by a caption to jump to a specific field.
116DDSE(
117FO(
118There are no unused blocks associated with this file.
119PURGE UNUSED BLOCKS FROM
120 Enter 'Y' to delete, 'N' to keep.
121Delete (Y/N)?
122Deleting block
123Delete all unused blocks without prompting (Y/N)?
124 Enter 'Y' to delete unused blocks from the BLOCK file
125 without confirmation.
126 Enter 'N' to confirm each delete.
127Continue (Y/N)?
128 Enter 'Y' to delete form. Enter 'N' to exit.
129 UNUSED BLOCKS
130 ASSOCIATED WITH FILE
131Deleting the FORMS...
132Deleting the BLOCKS...
133Block
134was deleted from the Block file.
135I'm deleting pointers to that block from
136Form
137The above form(s) need to be redesigned.
138Deleting form
139DELETE FORM FROM
140Select FORM to delete:
141Delete all deletable blocks used on form
142from the BLOCK file (Y/N)?
143 Enter 'Y' to delete blocks used on form
144 from the BLOCK file.
145 (Only blocks not used on other forms can be deleted.)
146 Enter 'N' to delete the form but not the blocks.
147Delete blocks without prompting (Y/N)?
148 Enter 'Y' to delete blocks from the BLOCK file
149Used on
150Other Forms? Deletable?
151PRIMARY FILE
152DDO,bk#,pg#
153with caption or unique name
154SCREENMAN OPTION^1.01
155Report of Form
156DDSFORM(0)
157PRIMARY FILE:
158READ ACCESS:
159DATE CREATED:
160WRITE ACCESS:
161DATE LAST USED:
162CREATOR:
163RECORD SELECTION PAGE:
164PRE ACTION:
165POST ACTION:
166POST SAVE:
167DATA VALIDATION:
168FORM LISTING -
169FILE:
170Start each page of the form on a new page
171Page Page
172Number Properties
173HEADER BLOCK:
174PAGE COORDINATE:
175IS THIS A POP UP PAGE?:
176LOWER RIGHT COORDINATE:
177NEXT PAGE:
178PREVIOUS PAGE:
179PARENT FIELD:
180Block Block
181Order Properties (Form File)
182TYPE OF BLOCK:
183BLOCK COORDINATE:
184POINTER LINK:
185REPLICATION:
186INDEX:
187INITIAL POSITION:
188DISALLOW LAYGO
189FIELD FOR SELECTION:
190Block Properties (Block File)
191Header Block Properties
192DATA DICTIONARY NUMBER:
193DISABLE NAVIGATION:
194Field Field
195Order Properties
196FIELD TYPE:
197CAPTION:
198EXECUTABLE CAPTION:
199DISPLAY GROUP:
200UNIQUE NAME:
201FIELD:
202COMPUTED EXPRESSION:
203READ TYPE:
204PARAMETERS:
205QUALIFIERS:
206HELP:
207INPUT TRANSFORM:
208SAVE CODE:
209SCREEN:
210CAPTION COORDINATE:
211DATA COORDINATE:
212DATA LENGTH:
213SUPPRESS COLON:
214DEFAULT:
215EXECUTABLE DEFAULT:
216REQUIRED:
217DISABLE EDITING:
218RIGHT JUSTIFY:
219DISALLOW LAYGO:
220SUB PAGE LINK:
221BRANCHING LOGIC:
222POST ACTION ON CHANGE:
223READ TYPE
224form-only field in the BLOCK
225IX(
226 NOTE: You must Save or Discard all edits to the
227 previous record before editing the next record.
228Save, Discard, or Return (S/D/R)
229Enter 'S' to save or 'D' to discard.
230Enter 'R' or '^' to return to previous record.
231RUN FORM FROM
232Enter number of first page:
233YyNn^
234Yy
235'^' TO STOP:
236DA,ND)
237DD or caption-only
238FIELD multiple of the BLOCK
239DD, computed, or caption-only
240WARNING: This field is uneditable.
241 Any changes made in the editor will not be saved.
242Press RETURN to enter editor:
243Press 'RETURN' to edit this word processing field.
244Compiling
245Compiling all forms ...
246Deleting compiled form data ...
247Ffile#
248DDSRNAV(
249DDSN(
250DATA DICTIONARY UTILITY OPTION^1.01
251Check the Data Dictionary.
252Remove erroneous nodes
253This routine will try to fix certain nodes that are erroneous and may set some nodes to a file referenced by the selected file.
254Say 'NO' here to leave the DD untouched. It will only flag the ones it finds erroneous.
255Checking file #
256You don't have DD access to this file. No fixing will be done on this file.
257is missing zero node of DD.
258Checking 'ID' nodes for 'Q'.
259Checking 'IX' nodes.
260Checking 'PT' nodes.
261has duplicate 'NM' nodes.
262'ID' node for field
263Cross-reference logic is missing for
264is not a pointer.
265is not a pointer to file
266Duplicate
267 node was deleted.
268is missing.
269) was killed.
270Checking FIELDs
271 is missing its zero node. Nothing done.
272doesn't have the correct protection for a field with executable code.
273 was set.
274points to missing file:
275is missing its 'PT' node in the pointed-to-file.
276missing subfile:
277Bad 'UP' pointer in subfile #
278Checking subfile #
279Returning to
280triggers missing file
281triggers missing field
282 in file
283 5 node is missing.
284FILE (#.01) for
285NAME for
286ROOT FILE for
287ORDER NUMBER of Cross-Reference Value #
288FILE for
289AC index (In: DDUCFI = file; DDUCFIX = flag to fix)
290 set to
291ROOT TYPE for
292 set to 'INDEX FILE'.
293ORDER NUMBER for Cross-Reference Value #
294 set to '
295 was killed.
296 was set
297Checking Indexes.
298 Nothing done.
299FILE does not equal ROOT FILE in
300. Nothing done.
301File #
302 referenced in
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.