source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0052.txt@ 909

Last change on this file since 909 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 12.0 KB
Line 
1English French Notes Complete/Exclude
2 Claim Folder Loc:
3Current Admission Data:
4Admission Date:
5Admitting Diagnosis:
6Discharge Date:
7Discharge Type:
8Bed Service:
9Prior Admission Data:
10Eligibility:
11Enter ?? for more actions
12AR\
13MANUAL 21 DAY CERTIFICATE PROCESSING
14This program should be run only if the Task Manager fails.
15Manual 21-day Cert program
16Not applicable
17Notice to MAS personnel on
18There were no 21 day certificates to print today.
19There were
20 certificates processed on
21Patient record missing for DFN
22REPORT OF CONTACT
2321-DAY CERTIFICATE
24PAGE: 1
25Patient name:
26 The patient above has been hospitalized for 21 consecutive days
27, and the major diagnosis for
28this period is:
29Physician signature:
30 Approved by:
31ROC 119
3221-day certificate
33DATE RULED INCOMP:
34Select C&P worksheet to print:
35** Worksheets should be sent to a printer. **
36DVBA Print blank C&P worksheets.
37Task queued! Task number:
38There are no new 21-DAY CERTIFICATES to print.
39Your USER NUMBER is missing. Call the site manager.
40REGIONAL OFFICE 21-DAY CERTIFICATE PRINTING
41This program generates ORIGINAL Regional Office 21-day certificates.
42Original RO 21-day Cert Printing
43A signed copy of this document is on file at
44Original Processing Date
4521 Day Certificate
460,0,0,2:2,0^No data found to reprint
4721-DAY CERTIFICATE REPRINTING
48Enter ORIGINAL PROCESSING DATE:
4921-day Cert reprint
500,0,0,2:2,0^Request queued.
51ORIGINAL PROCESSING DATE
520,0,0,0:2,0^This program REPRINTS 21-day certificates for the RO.
531,0,0,2:2,0^Your USER NUMBER is missing. Call the site manager.
54REGIONAL OFFICE 21-DAY CERTIFICATE REPRINTING
55Setting APE x-refs with new name...please wait
56Killing APE x-refs with old name...please wait
57MANUAL 7132 PROCESSING
58Enter BEGINNING date:
59 and ENDING date:
60Invalid date sequence.
61Enter output device:
62AMIE Discharge Checker
63TO CNH
64Notices of discharge created on
65 for discharge date range
66Admission date
67Notice to MAS operator on
68There were no NOTICES OF DISCHARGE to create.
69 of discharge created.
70Admission entry in Patient Movement File has been deleted for:
71Contact VAMC for further information.
72Notice of Discharge
73NOTICE OF DISCHARGE REPORT
74This program will print out any new NOTICES OF DISCHARGE,
75based on the hospital's discharges.
76Enter Y to print out the notice, N if you want to exit the program.
77AMIE NOTICE OF DISCHARGE REPORT
78No data found.
79Enter NAME to reprint:
80Reprint notice of discharge
81FDT*
82Request queued
83 to stop
84* REPRINT * NOTICE OF DISCHARGE REPORT
85NOTICE OF DISCHARGE REPRINT
86This program will reprint NOTICES OF DISCHARGE,
87Enter Y to reprint or N to quit.
88Do you want only one Veteran
89Enter Y to get one VET, N for all.
90Enter ORIGINAL PROCESSING date:
91The date the notices were originally printed on.
92AMIE NOTICE OF DISCHARGE RPT
93No data found for parameters.
94AMIE DICHARGE REPORT
95DISTYPE(
96End of the Report
977131 Divisional Transfer
98Activity Date:
99Information Request Form
100Selected
101Select Report(s) to Transfer:
102Select a number or range of numbers from 1 to 10 (1,3,5 or 2-4,8). You will
103then be asked to select a division to transfer the report(s) to. After a
104division is selected, the new division will display next to the report(s).
105Select a Division to Transfer to:
106The AMIE Site Parameter File is not set up properly.
107Contact the Medical Center's IRM department.
108<Return> to continue.
109You have selected a report with a status other than Pending.
110All reports selected for transfer must be Pending.
111You have no USER NUMBER. Contact the site manager.
112Unknown operator
1137131 REQUEST STATUS EDITING
114Enter PATIENT NAME:
115DVBA SUPERVISOR
116Supervisory edit -- all fields available.
117Note: As a Supervisor you will be allowed to use the
118 to escape
119from the program if desired. This is not normally allowed.
120All items are completed. This record is now FINALIZED.
121Updating record, please wait
122This is finalized. Do you want to 'unfinalize' it
123Enter Y if you wish to reopen this and be able to edit it,
124or N to leave it as is
125This record has already been finalized on
126 to exit
1271,0,0,1:2,0^DUZ must be set to a valid user to run this init.
1281,0,0,1:2,0^DUZ(0) must be defined
1291,0,0,1:2,0^DUZ(0) must be equal to '@'
1301,0,0,1,0^Your site seems to be running a version of FileMan that is less than 20.
1310,0,0,1:2,0^Please investigate the version of FileMan.
1320,0,0,2,0^Environment check completed OK!
133EDIT 7131 REMARKS
134Your user number is not set.
135Your user number is invalid. Please log off and back on.
136AUTOMATIC 7131 FINALIZATION - USER MODE
137This program will search the entire 7131 file
138and FINALIZE all requests that are ready.
139Enter Y to go ahead and finalize all requests which are ready
140or N to exit.
141Automatic 7131 Finalization
142The following Veterans had requests automatically finalized on
143Veteran name
144Total requests finalized:
145Bad 7131 record for internal entry #
146!...Notify IRM!!
147Auto-finalized
148Automatic 7131 finalization on
149'DVBA C VIEW EXAMS' List Template...
150DVBA C VIEW EXAMS
151DVBA C VIEW EXAMS^1^^80^3^20^1^1^^DVBA C VIEW EXAMS (MENU)^DVBA C VIEW EXAMS^1^^1
152'DVBA DISCHARGE TYPES' List Template...
153DVBA DISCHARGE TYPES^1^^80^5^20^1^1^^DVBA DISCHARGE TYPES (MENU)^Discharge Type Selection^1^^1
154DISCHARGE TYPE^8^41^DISCHARGE TYPE
155DISCHARGE CODE^51^4^CODE
156This is a list of the default discharge types.
157Some of these types may not be active at this site.
1580,0,0,2,0^No new discharge types were selected.
1590,0,0,1,0^I will go back to the default list.
160You may now add to the default list of discharge types.
161You may now select a new list of discharge types.
1620,0,0,1,0^Both 'active' and 'inactive' discharge types can be selected.
1630,0,0,1:2,0^If help or a list is needed enter a '?'
1641,0,0,2,0^No discharge type MAS Movement Transaction type was found
1650,0,0,1,0^Contact your site manager.
1661,0,0,2,0^This discharge type has already been selected.
167DISCHARGE TYPE
168DISCHARGE CODE
169Results of AMIE 7131 ASIH clean-up at station
170Start time:
171Job Number:
172This message was generated as part of the clean up performed with
173 the installation of patch DVBA*2.7*5.
174IRM STAFF INFORMATION FOLLOWS:
175The following is a list of 7131 requests entered for an ASIH
176 Admission date. The Admission Date field (#3) was changed so
177 the time stamp no longer indicates ASIH.
178Only Regional Office Staff need be concerned with this.
179REGIONAL OFFICE STAFF INFORMATION FOLLOWS:
180R/O Staff, If you are adjudicating the claim of a veteran listed here,
181 be aware that Notices of Discharge generated for the admission date noted
182 may indicate discharge to another VA Facility.
183Check the veteran's claim folder for determination of action necessary.
184End time:
185(IRM NOTE: Bad patient name for DFN
186 7131 for ASIH Admission Date
187No ASIH Admission 7131s were found for your Medical Center.
188The number of records corrected was
189IRM PERSONNEL:
190Please forward this message to Regional Office personnel who use your system.
191 .....Notice of Discharge has been generated!
192AMIE 7131 ASIH clean up
193DVBA ASIH CLEANUP
194 ...Message has been delivered to installer!
195Select the desired report
196 - Version 2.6 of AMIE has already been loaded.
197There is no need to update the Disability Condition file.
198Adding to the Disability Condition file.
199Additions to the Disability Condition file (31) has finished.
200 were added.
201Disability Condition
202 was not added. Entry already exists.
203Not able to add Disability Condition
204. Consult the Install Guide.
205 - Adding to 2507 Body System File.
206Could not add code
207 to body system
208Could not find body system
209Error adding exam
210I have updated
211 exams to the 2507 Body System File!
212Zero node of the
213 code does not exist. Please investigate!
214AMIE PENDING REPORT
215There is no need to add Long Descriptions to the Disability Condition file.
216 - Adding Long Description to the Disability Condition file.
217- Problems exist with the disability condition
218 Long description NOT added!
219I have finished updating the long descriptions of the Disability Condition file!
220Sort by Division
221Enter Y to sort by the Division you
222select or enter N to report ALL Divisions.
223Invalid response.
224Division number:
225 to exit
226Changed record
227 of the AMIE Exam File from
228 - Updating AMIE Exam file pointers to the 2507 Body System file is complete
229 records were updated.
230 - Checking 2507 purge parameter
231No parameter file entry exists!
232Consult the AMIE installation manual for further details.
233AMIE EXAM file
2342507 BODY SYSTEM file
235The entry
236 is not defined in
237Consult the AMIE Install Guide for details
238The zero node of the entry
239 is missing in the
2400,0,0,1,0^Removal of data from file 396.91 and 396.92 is complete!
241Setting up List Manager Templates
242The Post-Init has completed.
243AMIE POST INIT
244AMIE v2.7 install results
245Mail Message containing Error Log has failed!
246Errors contained in ^TMP(
247Investigate this global to determine any existing problems.
248Mail message containing Error Log has been sent.
249Check your mail to see this log.
250The pre-init found a problem in the version of MTLU and KERNEL.
251Please review and correct. See install guide for further details.
252No updates have occurred to the following files:
253 Local Lookup
254 Local keyword
255 Local Synonym
256 Local Shortcut
257 2507 Body System
258 AMIE Exam file.
259 Long Descriptions of the Disability Condition file.
260The post init could not add to the Local Lookup file.
261 Now in order!
262DVBA C&P SCHD EVENT
263DVBA C&P SCHD EVENT Now in order!
264Could not find menu option
265 NOT opened!
266Removing the 'D' cross reference from file 396.3
267Cross reference and data for 'D' in 396.3 deleted!
268Removing the 'C' cross reference from 396
269Cross reference and data for 'C' in 396 deleted!
270EPILEPESY AND NARCOLEPSY
271.01///EPILEPSY AND NARCOLEPSY
272Renaming of
273EPILEPSY AND NARCOLEPSY
274 is complete!
275 - Reindexing the 'AC' cross-reference.
276Reindexing of 'AC' complete!
277 - Reindexing the 'AF' cross-reference.
278Reindexing of 'AF' complete!
279 - Reindexing the 'AE' cross-reference.
280Reindexing 'AE' for field 23 complete!
281HL7 Version 1.5 not installed, I will not attempt to set up the AMIE/Kurzweil entries.
282DVBA AMIE
283The HL7 DHCP Application Parameter file (771) already
284has a DVBA AMIE entry! No updating of this file.
285Setting up the entry in the HL7 DHCP Application Parameter file (771).
286An error has occurred entering the entry into file 771. This file must be checked and set up properly. Continuing on to 770.
287The HL7 Non-DHCP Application Parameter file (770) already
288has an AMIE entry. No updating of this file.
2893///KURZWEIL;4///245;5///3;7///2.1;8///DVBA AMIE;9///30;14///P
290Now setting up the entry in the HL7 Non-DHCP Application Parameter file (770).
291An error has occurred entering the necessary entry in file 770. This entry must be set up before use.
292The post init has finished!
293An error has occurred entering the message or segment types into file 771. Please check
294this file to make sure all the necessary file entries exists.
295 - Adding to AMIE Exam File
296Could not find AMIE Exam
297Addition of exam
298 has failed.
299 exams to the AMIE Exam file.
300 code does not exist, AMIE Exam
301. Please investigate!
302'C' cross reference for code
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.