source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0159.txt@ 1762

Last change on this file since 1762 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 10.5 KB
Line 
1English French Notes Complete/Exclude
2SELECTIONS CURRENTLY DEFINED FOR '
3' PRINT GROUP
4Now for another SELECTION LIST entry!
5Enter the number of occurrences
6Unable to create a new selection record!
7Subcolumn Header:
8Edit Subcolumn
9 code to pass along with original.
10The package interface routine for selection is not properly defined
11Which subcolumn do you want to sort by?
12How should the list be sorted?
13Resequence by Group or Group and Place Holders?
14GROUP/PLACE HOLDERS
15RESEQUENCE LIST
16Editing Entry #
17Editing Subcolumn
18Delete?
19 code to associate with the original:
20Selection #
21Do you want to add another
22Unable to create the place holder!
23Invalid CPT Modifier entered for CPT procedure code.
24Move the TOP MARGIN of the block to which row?:
25Move the LEFT MARGIN of the block to which column?:
26Move the BOTTOM MARGIN of the block to which row?:
27Move the RIGHT MARGIN of the block to which column?:
28... BUILDING THE FORM ...
29] ?? for more actions
30NP >
31WARNING: The block =
32 overlaps page boundries!
33Unable to edit the block!
34Save changes to the block
35Save or Discard the recent changes to the block?
36Before printing the form any changes you have made must be saved.
37Is that okay?
38Unable to create a new block!
39New Block Name:
40Test with what Patient
41Copy Page Number
42Which page do you want to copy?
43Copy To Line Number
44Begining at what line should the page be pasted?
45Copy an entire page or a single block?
46You can copy either a single block or an entire page.
47TEMPORARY CLINIC LIST
48The form is in use by other clinics!
49Still want to edit
50EDIT FORMS FOR WHICH CLINIC?
51Basic Encounter Form
52Supplemental Form - Established Patients
53Supplemental Form - New Patients
54Form To Print With No Patient Data
55For Future Use
56Supplemental Form - All Patients
57FORMS CURRENTLY USED BY '
58' HOSPITAL LOCATION
59Cannot be deleted, the form is in use!
60Unable to create a new form!
61Select FORM for Clinic Setup:
62How should the clinic use the form?
637:WILL NOT BE USED BY CLINIC;
64But you already have a form for that use!
65Do you want to replace it
66Viewing the
67 Toolkit block
68You can create a [N]ew list, edit its [A]ppearance, [D]elete it,
69edit its [Co]ntents, [P]osition or size its columns. Choose from:
70There is no selection list!
71No selection list selected! Try again
72Entering the number of list columns is optional. By default the list will be
73given as many columns as the block has space for.
74Entering the information on the position of the columns and their
75height is optional. Appropriate default values will be used. However,
76you may specify your own values for up to 4 coulmns.
77You can now specify the subcolumns the list should contain.
78There can be at most 6 subcolumns, numbered 1-6.
79New Selection List Name:
80Select the TYPE OF DATA that the list will contain:
81Unable to create a new selection list!
82Select the type of formatting
83What subcolumn do you want formated? Choose from (
84The new subcolum
85 contains the same
86 contains the samedata as the the new subcolumn.
87**New subcolumn deleted**
88This data already exists in subcolumn
89. Go in and edit its subcolumn number.
90*** PREVENTING LOSS OF DATA - THIS FIELD CAN NOT BE EDITED ***
91You will need to add a new subcolumn to update this information
92A DISPLAY FIELD outputs data from VISTA, MULTIPLE CHOICE FIELDS
93and HAND PRINT FIELDS allow input of data, LABELS are for fixed text fields
94Edit fields for: [D]isplay, [M]ultiple Choice, [H]and Print, [L]abel only
95You can Create, Edit, or Delete a data field, Shift all of the data fields
96within a range up or down, or List their locations .
97There is no data field!
98No data field selected! Try again
99Unable to create a new data field!
100New Field Name:
101Select the TYPE OF DATA that should be displayed:
102What is the top-most row to report on?
103What is the bottom-most row to report on? (optional)
104Enter the lowest row that you want to report on.
105Enter nothing to report all data fields below the highest row that you specified.
106What is the left-most column to report on?
107What is the right-most column to report on? (optional)
108Enter the right-most column that you want to report on.
109Enter nothing to report all data fields to the right of the left-most column that you specified.
110LIST OF DATA FIELDS
111MULTIPLE SF
112PRINT COMPLETE
113Name of Data Field:
114 Multiple Subfields With Data:
115Row:
116 Lines Allocated On Form:
117 Number On List:
118 Last On List To Print?:
119Package Interface:
120 Print Overflowed Data?:
121Label
122 (not displayed):
123You can Create, Edit, or Delete a multiple choice field, or Shift all of the
124multiple choice fields within a definable range either up or down.
125There is no multiple choice field!
126No multiple choice field selected! Try again
127Unable to create a new input field!
128You can Create, Edit, or Delete labels, Shift all of the labels AND data
129fields within a range up or down.
130There is no label only field!
131No label selected! Try again
132Unable to create a new label!
133You can Create, Edit, or Delete an hand print field, or Shift all of the hand print fields
134within a definable range either up or down.
135There is no hand print field!
136No hand print field selected! Try again
137Unable to create a new hand print field!
138You can add vertical or horizontal lines to the block, or edit or delete
139a line already there IF it was created through this action.
140There is no line!
141No data line selected! Try again
142Unable to create a new line!
143You can add text areas to the block, or edit or delete a text area already there.
144[C]reate , [D]elete, or [E]dit a text area
145There is no text area!
146No text area selected! Try again
147Unable to create a text area!
148New Text Area Name:
149WARNING! The text area is too small to display all of the text.
150WARNING! The word
151 is being truncated
152because it is too long.
153$$FORMID INVALID$$
154No user Identified
155No Secondary Menus
156NO DATA RECEIVED
157PARTIAL DATA RECEIVED
158DATA PARSED INTO FIRST ARRAY
159PCE
160FORMID=
161ZW ALAN W !! ZW PXCA
162The following Data was NOT Sent to PCE because
163 was marked!
164Checkout Date/Time:
165Primary
166Secondary
167Visit Type CPT:
168Visit for SC Condition
169Visit for Agent Orange Condition
170Visit for Ionizing Radiation Condition
171Visit for Environmental Contaminates Condition
172Visit for MST
173Eligibility for Visit:
174Additional Credit Stop:
175HEALTH FACTORS
176SKIN TEST
177PATIENT ED
178Treatment:
179Vital Sign:
180Immunization:
181Problem List:
182Health Factor:
183Minimal
184Moderate
185Heavy/Severe
186Skin Tests:
187Patient Eduction:
188 , Level of Understanding:
189Poor
190Fair
191Diagnosis/Problem: unspecified
192Diagnosis/Problem
193, Clinical Lexicon term:
194, Added to Problem List
195, Patient Active Problem:
196 SC Condition
197 AO Condition
198 IR Condition
199 EC Condition
200Local Data Received:
201Height
202Other Vital
203ENCOUNTER FORM
204'VA SITE =
205 else if (
206IBDF-NAME
207ENCOUNTER FORM 71
208AICS #52/DDE channel is closed\
209IBDSCAN\
210DdeServerConv\
211AICS #54/Unable to Open Channel to AICS.\
212Unable to Open Channel to AICS to send data.\
213TOP LEFT ANCHOR
214PATTERN=C:\\VISTA\\AICS\\FORMSPEC\\AICSLOGO.BMP
215BOTTOM LEFT ANCHOR
216TOP RIGHT ANCHOR
217BOTTOM RIGHT ANCHOR
218Anchors not found, recognition stopping!\
219SAVEFORM(0,0,0,U
220DdeServerItem\
221Anchors not found\
222SCANPAGE?
223FORM ID CHECK
224FORM ID
225PAGE CHECK
226TOP OF PAGE
227TOP OF PAGE 2
228BOTTOM OF PAGE
229AICS is not connected, no data exported!\
230SAVEFORM(
231Warning: Saving of Unrecognized form in AICS has Failed!\
232Operator Verification Needed\
233FIELD '
234BEGIN = {ALPHA sfstr;
235ALPHA str;
236INT sfconf;
237INT conf;
238INT found;
239INT ret;
240INT position;
241INT delfield;
242The following handprint field
243 value was deleted: \
244BEGIN = {ALPHA str;
245 is required!\
246 INT field;
247 at least 1 required!\
248SAVEFORM(\
249FORMTYPE=
250FORMID=\
251DATA=\
252FORMTYPE=153\
253PAGE=1\
254IBDFC CONVERSION UTILITY
255 *** LIST OF FORMS TO CONVERT FOR SCANNING ***
256 Converted Forms Exist, Use'View Conversion Log' to view converted forms
257This form is already a version
258This form previously converted, new form name =
259CNV.
260Form Name
261 already exists. Form must be renamed first!
262No forms on List to convert!
263Each form on the list will be made scannable. However, the results should be
264carefully reviewed before putting the form into use.
265Do you want to print the form(s) after they have been converted
266** Forms require 132 columns and a page length of 80 lines. **
267ENCOUNTER FORM - FROM CONVERSION
268Use 'View Conversion Log' to view converted forms.
269Use 'Add Form to List' to convert a form
270To convert a form follow the following steps:
271 1. Use 'Add Form to List' to select the form. Add all the forms to
272 the list you wish to at this time.
273 2. Use 'Convert List' to convert the forms.
274 3. Use 'View Conversion Log' to review the conversion process and
275 assign the converted form to a clinic.
276Hint: The conversion creates a new copy of your form with the same name
277 as the original but prefixed with 'CNV.'. (i.e. form PRIM CARE
278 would be renamed CNV.PRIM CARE)
279IBDFC CONVERSION LOG
280CONVERTED FORMS
281 *** LOG OF FORMS THAT HAVE BEEN CONVERTED FOR SCANNING ***
282 *** Conversion Warnings For
283What is the last dated entry in the conversion log that should be deleted?
284BLOCK OFFSET
285RIGHT MARGIN CHANGED TO 133 FROM
286PAGE LENGTH CHANGED TO 80 FROM
287THE NUMBER OF PAGES CHANGED TO
288FORM NUMBER
289THE BLOCK '
290' OVERLAPS PAGE BOUNDRIES
291' EXTENDS PAST THE RIGHT MARGIN
292BUBBLE (use for scanning)
293IN THE LIST '
294' THE TEXT '
295' WILL BE TRUNCATED BY
296 CHARACTERS - MANUAL EDITING MAY BE REQUIRED
297IN THE SELECTION LIST '
298' THE ENTRY=
299 IS AN INACTIVE CODE
300In the Selection List '
301' the Code=
302 was automatically update to match the text=
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.