source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0203.txt@ 1582

Last change on this file since 1582 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 9.2 KB
Line 
1English French Notes Complete/Exclude
2in the MORPHOLOGY FIELD file (#61.1)
3Enter up to 6 characters.
4Entry can only contain digits, letters 'X' and 'Y'.
5Please enter the BEGINNING DATE here
6 Date can be T for Today
7 T+1 for Tommorrow
8 T-1 for Yesterday
9 OR the date 10-12-93
10Insufficient data entered.
11TYPE ? FOR HELP
12Please enter the LAST DATE here
13THE LAST DATE MUST BE AFTER THE BEGINNING DATE!
14Audit report of deletions/edited comments for a single patient
15No deleted/edited comments for
16No deleted/edited comments
17Collected:
18Comment deleted/edited:
19DELETED/EDITED COMMENTS
20This database
21CANNOT FUNCTION CORRECTLY
22 with results which
23are more than 60 characters long. The result for the test
24is more appropriately entered via comments. Please re-edit
25Comments for
26 cannot be generated
27because the data entered was too long. You are responsible
28for manually documenting any changes to the original data.
29 reported incorrectly as
30DIQS:$D(
31NO LAB DATA ON THIS PATIENT!
32Display cumulative summary (NO, displays graph)
33 Answer 'Y'es or 'N'o.
34How many time points?
35Select SITE/SPECIMEN: ANY//
36Plot relative to
37 values (if available)
38ASK FOR TESTS INDIVIDUALLY
39Expected values not available for
40Nothing to plot for
41No reference range is available
42SITE/SPECIMEN:
43REFERENCE LOW:
44REFERENCE HIGH:
45THERAPEUTIC LOW:
46THERAPEUTIC HIGH:
47UNITS:
48CRITICAL LOW:
49CRITICAL HIGH:
50DATE VALUE
51Target: mean=
52Actual: mean=
53CAUTION: Time scale is sequential, not proportional.
54FLAG ACCESSION VALUE OUTSIDE 2SD
55Reviewed by: ____________________________ Date: __________
56ACTUAL:
57TARGET:
58VALUE OUTSIDE:
59No reference range available
60Reviewed by: ___________________________________ Date: ____________
61 Enter a whole number.
62FILE:NAME
63Select Patient Name:
64You may enter patient identification or enter a file name followed by
65 for more extended help.
66The LAB DATA file is locked. Please try again later.
67Internal patient ID incorrect in ^LR( for
68. Contact Lab Coordinator.
69Internal patient ID incorrect for
70Select FILE:
71ABO group:
72 Rh type:
73Infection control warning:
74 DATE OF BIRTH:
75Patient in hospital but Ward Location begins with a space !!!
76Location =>
77Ask MAS to fix it
78Ward on Adm:
79 Adm DX:
80Present Ward:
81Primary MD:
82Attending MD:
83Antibody present:
84Barcode error #
85Contact Lab Coordinator.
86Enter the sending facility's ten character UID for this specimen
87Enter sending facility's specimen ID, 1-30 characters
88Enter Remote UID
89There are duplicate SSNs in the Referral File <abort>
90Scan Patient/Accession Barcode (PD)
91Select Patient Name -'^M' To enter New Name
92LRT(
93 SSN X Ref Entry Removed
94Error1
95Error
96 SSN nunbers in LRT(67
97Manual Referral Patient Entry
98 Already Exist
99Patient ID (SSN)
100Enter New Patient ID Nunber
1019-12 Number string '-' character or duplicates are Not allowed
102List of Patients with Lab Orders
103Order Date:
104REPORT EMPTY.
105Report Completed
106ORDER NUMBER:
107SEND PATIENT
108WARD COLLECT
109LAB COLLECT
110TESTS:
111 Canceled by:
112Select PATIENT LOCATION:
113] is not a valid entry
114YOU MAY ALSO CHOOSE FROM:
115.99////MISSING PARAMETER
116eGFR not Calculated
117** No Age Recorded **
118** No Sex Recorded **
119** No Race Recorded **
120HISPANIC,
121CHEMISTRY TEST
122MICRO CULTURE
123BACTERIOLOGY CULTURE
124MYCOLOGY CULTURE
125MYCOBACTERIUM CULTURE
126VIROLOGY CULTURE
127ANTIBIOTIC MIC
128VA62.06
129VA63.39
130CY SPECIMEN
131 Was processed at
132XMB(3.8
133REPORTING DATE FROM
134NCH-AAC
135LR NCH-REPORT
136LR NCH-REPORT mail group not defined
137Flash... This is an acknowledgement message from NCH
138 From the status file 771.6 message is categorized as:
139Acknowledgement message from Austin.
140This option will allow you to link file '62.06 ANTIMICROBIAL
141SUSCEPTIBILITY' file with file '64 WKLD CODE.
142<----Not Linked---->
143Continue
144PV1|
145Laboratory Search rerun option
146Override Any Inactive indicators:
147Enter (Y)es if the overriding of any Inactive indicator is desired.
148Search Parameters
149Select Search Parameters:
150Select the Search Parameters.
151Sorry No Search Parameters Selected
152Select Search Date:
153LREPI(
154Laboratory Search/Extract
155The Task has been queued
156Enter (Y)es or return for all entries to be Selected
157Verification Report
158Message Date/Time
159Sending Site
160 Message Seq #
161Auto
162Accession
163Date
164 Discharge Date
165 Discharge Disposition
166ORG #
167 report generated
168thing done
169EPI SYSTEM
170MORTON,RANDY@DEV.ISC-DALLAS.VA.GOV
171RANDY.MORTON2@MED.VA.GOV
172Pathogen Ref# Cy LD Protocol FPTF Active
173IEN #
174 damaged. (No Protocol)
175 Lab Test Indicator Value
176 damaged. (No Test)
177Ref. Range
178Contains
179Greater Than
180Less Than
181Equal To
182 damaged. (No Etiology)
183 Microbial Susceptibility
184 damaged. (No Microbial Susceptibility)
185 Execute code
186 Delta code
187Will (is) the sample to be drawn at
188 Peak, Trough, Mid, or Unknown:
189You must answer this question! just enter a 'P', 'T', 'M', 'U'
190~Dose is expected to be at
191ADDITIONAL COMMENT:
192Enter the last dose time:
193Time unknown
194You must enter a time, e.g. T@6AM
195Enter draw time:
196~Last dose:
197 draw time:
198File Setup ...OK
199Unable to lock Lab Reports file (#64.5) check Lock Table
200BYPASSING ORDER ENTRY!!
201Do you want to enter draw times
202If you answer 'yes', you will be asked for the approximate time the specimen
203was taken from the patient. Otherwise, the current time will be assumed.
204ORDER CANCELED
205DRAW DATE/TIME:
206...process aborted
207Not authorized to use this option
208Do you want to review the data before and after you edit
209You MUST have LR*5.2*72 Installed BEFORE this patch
210PROCESS FLAGGED SPECIMENS
211Do you want to clear the FLAG Specimen List
212DON'T KNOW WHO'S DATA THIS IS
213 CAN'T FIND THE ACCESSION
214Auto Sequence #:
215DIDN'T FIND ANY TESTS THAT NEED EDITING
216GENERAL LAB DATA DISPLAY
217Too many tests! Will use alternate format. May show extra tests.
218Report Range [
219WORK COPY:
220Prt Date:
221[ *** End Of Report *** ]
222WORK COPY - DO NOT FILE
223 PRESS '^' TO STOP REPORT
224TEST NOT IMPLEMENTED
225 has a specialized print routine
226 and must be selected by itself.
227Listed above are the site/specimens for 'UNIQUE COLLECTION SAMPLES'
228defined for the tests selected. To see reference ranges, a specific
229site/specimen must be selected.
230Specify specimen actually tested. Use BLOOD when Whole blood is tested;
231use SERUM when Serum is tested; etc. In doubt press the Return key.
232Group unverified review (EA, EL, EW)
233No data to report
234By Accession list:
235No Unverified instrument Data for Acc#:
236Group unverified review listing
237By Tray. Load list:
238Start LRTRAY:
239By Machine Sequence number. Load/Work list:
240By Work list:
241Tray:
242 Results received:
243 Last updated:
244VERIFY BY
245Verify by
246Starting tray
247Starting cup
248Ending tray
249Ending cup
250Starting sequence number
251Ending sequence number
252Starting worklist number
253Ending worklist number
254 Would you like to see the list
255The (
256 ] Profile has
257Do you wish to modify the test list
258i.e., would you like to add or subtract ATOMIC tests?
259 tests to work with.
260>> Please check the PROFILE you have selected.
261>> At least one should be build name only = no
262Do you want to add ATOMIC test(s) to this panel
263Select ATOMIC test(s) you wish to add:
264The List now has
265Do you wish to exclude ATOMIC tests in this panel
266Tests removed from this panel will not be included for review or editing.
267Select ATOMIC test(s) you wish to exclude:
268Excluding
269 the following tests:
270Please enter your initials to verify:
271Group verify (EA, EL, EW)
272 No accession on file for this UID.
273 Has not been received. Unable to verify.
274 Has a collection time in the future. Unable to verify.
275 NO Instrument Data Found.
276Start TRAY:
277Tray
278No Instrument Data Found
279 Does not have a link to an Accession.
280SEQ:
281. Does not have a link to an Accession.
282Sequence #
283Verify accessions specified, even if
284 DELTA check or CRITICAL range flag?
285Everything OK
286NOTHING VERIFIED
287Group verification report - Verify with
288Load/Work list:
289Unable to obtain lock on sequence #
290Corrupt Accession
291 Auto Sequence #
292Accession NOT found.
293There's NO Instrument Data
294Unable to obtain lock on LAB DATA file
295DATA HEADER MISSING
296 Collection date/time:
297 << SPECIMEN IS NOT
298Some Data Already Verified
299Some Unverified Data Already Entered.
300 NOT VERIFIED <<
301Sequence #:
302TRAY:
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.