source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0209.txt@ 1086

Last change on this file since 1086 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 9.8 KB
RevLine 
[604]1English French Notes Complete/Exclude
2Lab Order Stats
3LEDI COST REPORT
4Division(s) /
5FACILITY TOTALS by :
6 Referral Patients
7All Patients
8 TOTAL COST
9No Detailed data to report
10<*> Detailed Patient Listing <*>
11<*> LABORATORY TEST ORDERING STATISTICS <*>
12Referral Patients Only Report
13For tests ordered during the date range
14Dollar Amounts computed using
15PRICE
16** SELECTED TESTS ONLY **
17 TOTAL COST
18TESTS BY:
19TEST:
20BY:
21TESTS ALREADY ON THE ACCESSION:
22Select Original Ordered Test
23Add LABORATORY TEST:
24The accession already has this test.
25That test normally belongs to accession area
26are you sure
27URGENCY must be defined. Test not added.
28What Accession number:
29CAN'T DO IT. The data has been approved for that log number.
30 The ability to DELETE an entire ORDER/ACCESSION
31has been REPLACED. The test(s) will now be marked
32as Not Performed and a reason for 'NP' will be stored
33with each test. Accession numbers can't be reused
34after it has been assigned to a specimen.
35You are not authorized to change test status.
36 Change Entire accession to Not Perform !!
37All accessioned test(s) changed
38Must be whole number between 1 and 999999, accession remains unchanged.
39All the individual tests for this panel
40are already included on this accession.
41Accession has no Test
42Someone else is working on this accession
43Someone else is working on this data.
44 Can't find Lab Data for this accession
45Change which LABORATORY TEST:
46Select another test:
47No Test Selected
48NO CHANGE
49There is no Order for this Accession
50Change Accession :
51 Marked Canceled by Floor
52 Marked Not Performed
53*Cancel by Floor:
54*NP Action:
55*Not performed
56No Subscript for this Accession Area
57Nothing Changed
58Select NP comment Lab Description screen
59Select Lab Description file screen to be used to expand your NP reason.
60 Press return to accept the default expansion screens.
61Select the Lab Description file expansion screen.
62The default expansion screens are GENERAL, ORDER and LAB
63You may select addition lab description expansion screens
64Press return if you want to only use the default screens
65Reason for Cancel
66Not Perform Reason
67You must enter Reason
68Satisfactory Comment
69*Floor Cancel Reason:
70*NP Reason:
71 Floor Canceled:
72 Not Performed:
73Sorry This accession
74 No longer exist
75 Accession may have been deleted.
76Someone else is editing this order
77 Added by
78Urgency Turnaround Time
79Select the laboratory tests to be used in this report --
80 LABORATORY TEST:
81LAB URGENCY TURNAROUND TIMES
82Urgencies:
83Enter all urgencies you want extracted.
84Select Division(s)
85Include a detailed report
86 enter 'Y'es or 'N'o
87LAB -
88****** END OF REPORT ********
89LEDI -
90LEDI Management Report -
91LEDI Utility -
92 Institution included in report:
93 Turnaround Time (TAT) -
94Regular (0701-1700)
95Irregular
96 Number of tests Total time Ave TAT
97Tests:
98Test Number of Tests Total TAT Ave TAT
99Regular
100TAT Acc Test In Out
101Tests not counted:
102Regular hours:
103Irregular hours:
104none found
105ANSWER 'YES', 'NO', '^', '@'
106or press RETURN key to accept default response (if one)
107THIS MAY TAKE A WHILE^LET ME PUT YOU ON 'HOLD' ^HOLD ON^JUST A MOMENT PLEASE^I'M WORKING AS FAST AS I CAN^LET ME THINK ABOUT THAT
108TO SORT IN SEQUENCE, STARTING FROM A CERTAIN NAME,
109TYPE THAT NAME
110TO SORT ONLY UP TO A CERTAIN NAME,
111You are not a valid user.
112You do not currently have a valid Division assigned.
113Log off the system and try again.
114You have only one Division Defined in the New Person file, change not possible.
115Division Unchanged - Currently you are assigned to
116Division is now set to [
1171. Add patient(s) to report print queue
1182. Delete report print queue
1193. Print single report only
1204. Print all reports on print queue
121Select print option:
122 SELECT A NUMBER FROM 1-4
123FIND PATIENT MISMATCHES IN VA PATIENT NUMBER FIELD OF FILE 65
124) Unit IFN:
125DATE/TIME RELOCATION:
126PATIENT MISMATCHES IN 65.03,.07 DATA ELEMENT
127Must have DIVISION VARIABLE 'DUZ(2)' defined.
128You must choose a location
129Do you want to see the entire HOSPITAL LOCATION File?
130Please choose a location within your division
131Type in at least two characters of your choice
132 OR type in ^ to exit
133ENTER WORKLIST DATE:
134NUMBERS ONLY
135Someone else is editing this Patient
136CLEAR WORKLISTS OVER 90 DAYS
137CONSULTATION REPORT
138Select CONSULTATION:
139Must have an accession area for
140DIRECT COOMBS TEST REPORT
141 entry in LAB LETTER file (#65.9) was deleted.
142CLINICAL RECORD
143There are no specimen dates for
144No serum antibodies present.
145SERUM
146 % OF THE POPULATION WILL BE COMPATIBLE.
147% Compatible Units:
148Patient has a positive Direct Coombs Test; however, no eluate antibodies are present for specimen dated:
149Is present testing OK
150 changed from:
151Above changed:
152Delete an Accession Number
153Accession number date:
154No accession numbers for
155Select Accession # :
156Enter NUMBERS only
157Accession number
158ACC #
159Report completed &/or released, deletion not allowed.
160 DATE RECEIVED:
161NOT DELETED
162Entry not in file
163 data change audits
164OK to delete audits
165PRISONER OF WAR VETS
166LABORATORY SERVICE
167 Special patients
168Find results for one or more tests (maximum of 13)
169from one date to another
170Patient count:
171Repeat tests in one day:
172Total tests:
173Find accessions with comments containing
1741. reported incorrectly as
1752. specimen rejected
176reported incorrectly as
177specimen rejected
178List accessions with deleted comments
179Do you want list of tests ordered for each accession with errors
180New page for each accession area
181 (deleted by
182Name/SSN
183Select lab test to check a range of values:
184Select Specimen Type to check:
185Not a valid specimen for the test selected.
1861. Greater than a value
1872. Less than a value
188Select value:
189Must be a numeric value.
190Report for:
191Brief listing:
192Start with file number:
193End with file number:
194TABLE OF CONTENTS FOR FILES
195Enter a number. No other characters allowed.
196 does not equal
197Dates of birth are different
198Donor:
199 not entered in PATIENT FILE
200Another patient:
201The above entries not yet printed. Do you want to delete them
202No date for
203 doesn't exist for
204LOCATION ABBREVIATION DOES NOT EXIST
205Accession list date:
206Start with Acc #: FIRST //
207 Log-Book for
208#= Not PATIENT file
209Acc no
210Spec/Sample
211Byte count for accessions
212ACCESSIONS:
213 AVERAGE BYTES/ACCESSION:
214Print/display tests for a single patient or group
215Print/display microbiology results (excluding antibiotics)
216instead of defined lab tests
217Print by (T)est list (P)atient list
218Enter T or P:
219 Enter 'T' for Test List or 'P' for Patient list
220List for:
221Work copy- DO NOT PUT IN PATIENT'S CHART
222Delete users' lab test/patient lists
223if they haven't used the lists since: T-6 MONTHS//
224Enter a date in the past
225You have no patient list. To enter patients answer the following prompt:
226(A)dd/edit patients
227(T)ransfer list to another user
228(D)elete list
229(P)atient group deletion
230(M)erge list with another user
231(S)end list to printer
232Enter R, A, T, D, P, M, S or <CR> to accept list:
233Your patient list has been deleted
234Transfer patient list to another user (current user list is saved)
235Transferring
236Transfer completed.
237Merge patient list with another user's list
238No patient list for
239Merging
240Merge completed.
241Press <CR>, <RETURN>, or <ENTER> key
242Remove patients by (N)umber or (P)atient name
243Enter N or P:
244Enter 'N' to delete by number or 'P' to delete by patient.
245Select number to delete patient
246To delete a patient select a number
247within range shown above
248Number
249 was deleted. It is not necessary to enter the same number again.
250Patient list for:
251Select patient to delete:
252(P)rint test lists
253Enter E, D, R, P or <CR> to accept lists:
254You have no test lists. Instead of creating your own
255would you prefer to copy another user's lists
256 has no test lists.
257Test list for
258New page for each patient
259F:FINAL REPORT;P:PRELIMINARY REPORT;
260RPT DATE:
261PT GRP:
262Site/specimen
263Collection sample
264No Room
2651. Single patient
2662. Group of patients
2673. Patients for a ward
2684. Patients for a clinic
269Select 1,2,3 or 4:
270Select CLINIC DATE:
271n't meet on
272You have no groups to select from.
273Select group number:
274Select a number from 1-
275Print ALL test lists
276Enter test list number(s):
277Enter your test list numbers
278Your test list numbers are:
279To see the tests for the above numbers use the
280'Enter/edit user defined lab test lists' option.
281MICROBIOLOGY REJECTED SPECIMENS FROM:
282DATE TAKEN
283 ACCESSION LIST
284LIST BY PATIENT
285LIST BY COLLECTION SAMPLE
286Select COLLECTION SAMPLE:
287Cell block (b) count:
288Slide count:
289 ACCESSIONS for
290Collection Sample:
291# = Not VA patient
292* = Reviewed by pathologist
293Slide
294Acc num
295Patient/Source
296Organ/tissue
297Specimen/Sample
298Entry not in lab results file
299Not in lab results file
300No SNOMED code
301Entry not in lab result file #63.
302 BY PATIENT
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.