source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0269.txt@ 1154

Last change on this file since 1154 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 13.2 KB
Line 
1English French Notes Complete/Exclude
2Building display...this may take a moment
3Data extracted for
4 No entries found for
5START_PPPPRT2
6PPP - Medication Profiles from other VAMC(s)
7Patient Medication Profiles For Clinics On
8Parameter File Not Found
9TOTAL PATIENTS =
10PRTBYNM_PPPPRT20
11PPP Foreign Facility Xref File
12by patient as of -->
13FACILITY NAME
14LAST VISIT
15PRTBYSTA_PPPPRT21
16by station as of -->
17STAHISTP_PPPPRT22
18STATION HISTOGRAMS
19Pharmacy Prescription Practices
20Foreign Facility Histograms
21Stations Vs. Number Of Patients
22As Of -->
23VISHISTP_PPPPRT23
24Number of Stations Visited Vs. Number Of Patients
25DATASUM_PPPPRT24
26Data Summary
27Total Number Of Patients In Patient File........................
28Total Patients In Other Facility Xref File......................
29Total Number Of Stations Visited................................
30Total Number Of Entries In Other Facility Xref File.............
31 Other Station
32Total Number Of Patients With Visits To
33Print Cross-reference By Patient Name
34Print Cross-reference By Station Name
35Print Station Histogram
36Print Visit Histogram
37Print Data Summary
38FOREIGN FACILITY CROSS-REFERENCE PRINT UTILITIES
39There is no data in the Foreign Facility Cross-reference File
40Select Range Of Items Or 'A' For All:
41Input Error ->
42Improper Format
43Value Out Of Range
44Please Re-enter.
45Please wait..building display for '
46PPP FFX REPORTS
47 ** No Data to Display ... <Return> to exit
48LISTING COMPLETE.
49Visits to other facilities are on file for ==>
50PPP - Medication Profile from other VAMC(s)
51 ** WARNING ** Patient is identified as :
52'PPP FFX DISPLAY' List Template...
53PPP FFX DISPLAY^2^^^6^16^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX DATA DISPLAY^1
54'PPP FFX REPORTS' List Template...
55PPP FFX REPORTS^2^^^8^21^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX REPORT DISPLAY^1
56'PPP LOG DISPL' List Template...
57PPP LOG DISPL^2^^^6^20^1^1^^^Display PPP Log^1
58'PPP PRINT' List Template...
59PPP PRINT
60PPP PRINT^2^^^8^21^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX REPORT DISPLAY^1
61'PPP PROFILE' List Template...
62PPP PROFILE^2^^^6^18^1^1^Prescription^^Medication Profile
63RX#^1^7^ RX#
64LAST FILLED^65^13^LAST FILLED
65'PPP UNRESOLVED DOM' List Template...
66PPP UNRESOLVED DOM^1^^^6^16^1^1^Domains^PPP (MENU) DOM^Edit Domain Entries^1
67'PPP VISITS' List Template...
68PPP VISITS^1^^^6^16^1^1^Facilities^PPP (MENU) VISITS^Other Facilities Visited^1
69'PPP XREF EDIT' List Template...
70PPP XREF EDIT^1^^^6^16^1^1^Entry^PPP (MENU) FF XREF^PPP V1.0 Add/Edit DATA^1
71Purge entries in PPP LOG file:
72Enter yes to purge out entries in file.
73RETAINED LAST
74PPP LOG file unchanged
75LOG1_PPPPURG
76PURGING=
77Purge entries in PPP FOREIGN FACILITY XREF file:
78PPP FOREIGN FACILITY XREF file unchanged
79XREF1_PPPPURG
80QUEUE JOBS TO RUN AT WHAT TIME:
81Try again later
82PPP PURGE LOGFILE DATA
83PPP PURGE FORIEGN FACILITY XREF
84XREFSCAN_PPPSCN1
85The following status were found while running XREFSCAN for last PDX batch
86Last Batch Request Date Not Found
87PPP - Nightly PDX Result Scan
88NOTHING RETURNED
89PDX Status For
90FFSCAN_PPPSCN2
91The following Errors occurred while attempting to send PDX's:
92TOTAL ENTRIES =
93Error From PPPPDX1 ==>
94TOTAL PDX'S REQUESTED =
95No Errors occurred while attempting to send PDX's
96PPP DAILY BATCH
97>>> Beginning Post Init Process
98>>> Installing protocols for use by the list processor
99>>> Installing list templates for use by list processor
100>>> Setting up Prescription Practices mail groups
101 'PRESCRIPTION PRACTICES'... mail group created
102 Error...Creating 'PRESCRIPTION PRACTICES' mail group, Post init HALTED
103>>> Test sites will receive special instructions to convert data
104>>> The building of the PPP FOREIGN FACILITY XREF needs to be
105 scheduled at this time. See Build/Rebuild Other Facility
106 Xref option off [PPP MAIN].
107>>> Post init process completed
108>>> Setting Up PPP Parameter File...
109Error Initializing PARAMETER File.
110>>> Setting Up Station Vs. Domain Cross-Reference...
111This routine will DELETE your existing PPP DOMAIN XREF file
112(if it exists) and then create it using your current DOMAIN file.
113>>> Loading PPP Domain Cross-reference...
114PPP DOMAIN XREF^1020.8P^^
115Station Number missing for
116Filing Station
117...(Station # not in INSTITUTION file)
118>>> Please Add Users To Mail Group...
1193///Used to alert users of problems encountered with the Prescription Practices Utilities.
120>>> Please add Users to the Prescription Practices Mail Group...
121Select Member
122Used to notify users of problems encountered with the Prescription Practices Utilities
123Mail group created..entry number =
124- Cross-reference added to field
125) of file
126>>> Changing Set statement in AD Xref of ^DPT, field SSN to call PPPFMX
127>>> Changing Kill statement in AD Xref of ^DPT, field SSN to call PPPFMX
128Error... AD Xref of ^DPT, field SSN is required
129Call ISC SUPPORT for assistance
130>>> Checking for required packages
131ERROR... MAS Version 5.3 is required for PPP v1.0
132ERROR... Outpatient PHARMACY Version 6.0 is required for PPP v1.0
133 - Outpatient PHARMACY v6.0 (OK)
134ERROR... PDX Version 1.5 is required for PPP v1.0
135ERROR... MPD v1.0 is required for PPP v1.0
136>>> The PPP cross reference will be added in a partial init of the
137 VAQ - TRANSACTION file on field .02 (Current Status).
138>>> Removing 'A1AY' cross reference from VAQ TRANSACTION file.
139>>> Removing 'A1AY2' cross reference from VAQ TRANSACTION file.
140DATE/TIME:
141USER:
142ROUTINE :
143Date Initialized......................
144Total PDX's Sent......................
145Total Alerts Issued...................
146Total Alerts Ignored..................
147Total Manual Entries Added............
148Total Entries Deleted.................
149Total Entries Edited..................
150Total New Patients Added..............
151Total Profiles Viewed.................
152Enter a date
153Enter 'return' to continue or '^' to exit.
154Enter 'Y' for yes, 'N' for no.
155 Enter year only!
156 Enter month and year only!
157PRCC=$G(
158PRCB))
159PRCD=$P($G(
160PRCB)),
161ZTSAVE(
162Package is defined, but has not current version data.
163Please call IRM!
164Warning: Selected Fund Control Point has a single year fund with multi-appropriation set up.
165Enter a year in the following sequence of years.
166Obligation/Common Number:
167Select Transaction Type
168 NOT found!
169FMS Document:
170Created:
171A IFCAP-Wide Parameters
172SO 2 AR Date
173SO.E
174SEND TO FMS AS AN:
175POST AGAINST AN FMS:
176Now searching for temporary transactions with missing 'Form Type'.
177The following transaction(s) require a valid 'Form Type':
178Search complete.
179 temporary transactions are missing 'Form Type' entries.
180IFCAP PRE-INIT STARTS at
181PRCO EDI RE-TRAN^PRCHPC PO
182PRCHPM CS RETRANSMIT BATCH^PRCHPM CS TRANSMISSION MENU
183ERROR TRAP! CALL IRM/ISC SUPPORT.
184IFCAP PRE-INIT ENDS at
185IFCAP POST-INITIALIZATION STARTS at
186IFCAP POST-INITIALIZATION ENDS at
187IFCAP V5 INSTALLATION 'Option 2' STARTS at
188Print FCP ACCOUNTING ELEMENTS LIST
189Ask Fiscal Service to check the FCP ACCOUNTING ELEMENTS LIST for each Fund Control Point with the Cross-walk Table.
190Your Accounting Elements should match your Cross-walk Table.
191Note: You can not run Option 3 or 4 if your site has an active SUPPLY FUND Control Point but the FCP Accounting Elements are missing or incorrect.
192You also can not run Option 3 or 4 if you have an active GPF Control Point and your FCP Accounting Elements List does not show a 'GPF FMS CONVERSION' Fund Control Point.
193IFCAP V5 INSTALLATION 'Option 2' ENDS at
194IFCAP V5 INSTALLATION 'Option 3' STARTS at
195Print SNAP SHOT FCP BALANCE
196FCP BAL
197IFCAP V5 INSTALLATION 'Option 3' ENDS at
198IFCAP V5 INSTALLATION 'Option 4' STARTS at
199IFCAP V5 INSTALLATION 'Option 4' ENDS at
200This is the last installation option you just finished.
201Check file 442 conversion task is running.
202IFCAP V5 FILE 442 CONVERSION SUBMITTED TO TASK MANAGER AT
203IFCAP V5 FILE 442 CONVERSION HAS TASK NUMBER
204IFCAP V5 file 442 conversion done. Total FMS documents =
205IFCAP V5 FILE 442 CONVERSION DONE^IFCAP V5 Installer
206POST INITIAL: Move name (.01) to ald (5) for file 420.3
207POST INITIAL: Process FMS FND-DOCUMENT
208POST INITIAL: Process FMS FND-DOCUMENT done!
209POST INITIAL: Process FMS PCL-DOCUMENT
210POST INITIAL: Process FMS PCL-DOCUMENT done!
211POST INITIAL: Process FMS CPF-DOCUMENT
212POST INITIAL: Process FMS CPF-DOCUMENT done!
213GPFS FMS CONVERSION
214 GPFS FMS CONVERSION
215POST INITIAL: Process FMS PAC-DOCUMENT
216POST INITIAL: Process FMS PAC-DOCUMENT done!
217POST INITIAL: DEACTIVATE SUBCOSTCENT STARTS at
218POST INITIAL: DEACTIVATE SUBCOSTCENT ENDS at
219POST INITIAL: Process FMS SUB-DOCUMENT at
220POST INITIAL: Process FMS SUB-DOCUMENT done!
221This task is going to send all active purchase orders dated
222after 12/31/1988 to FMS with F.O.B. data only.
223Please schedule this task one day before your site IFCAP V5 INSTALLATION
224Submit to the Task Manager fails, try later!
225 assigned with schedule date/time:
226START SENDING P.O. AND F.O.B TO FMS
227FOB TOTAL RECORD SENT:
228END SENDING P.O. AND F.O.B
229TOTAL IFCAP V5 FOB RECORDS SENT TO FMS:
230IFCAP V5 INSTALLATION FOB RECORD COUNT^TASK MANAGER
231IFCAP V5 FOB DOCUMENTS
232IFCAP V5 INSTALLATION
233XXX@Q-FMZ.VA.GOV
234IFCAP/FMS AAF MESSAGE IS IN INVALID FORMAT.
235PLEASE CALL FMS-CONVERSION TEAM USER TO RESEND THIS MESSAGE:
236 WITH IFCAP ERROR:
237CTL-
238IFCAP/FMS CONVERSION ERROR MESSAGE-AAF^IFCAP FMS MESSAGE SERVER
239IFCAP/FMS CONVERSION MESSAGE
240 PROCESS FAILS
241IFCAP/FMS COPY ERROR MESSAGE-AAF^IFCAP FMS MESSAGE SERVER
242 PROCESSING DONE.
243IFCAP/FMS PROCESS DONE MESSAGE-AAF^IFCAP FMS MESSAGE SERVER
244CONVERT POSTED ISSUE BOOK BALANCE FOR IFCAP V5 INSTALLATION QUARTER WITH V4 RECORDS ONLY
245For IFCAP v4 -> v5 Installation Date
246CONVERT POSTED ISSUE BOOK REQUEST FOR
247ISSUE BOOK
248ISSUE BOOK form type code is not 5 in file 410.5
249Issue Book complete status is not in file 442.3
250ISSUE BOOK CONVERTING FOR OLD IFCAP V4 RECORDS STARTS
251 Any IB transactions followed by a printed message 'IB obligation #/amount...'
252were not converted because the Obligation Data was not entered for these IBs.
253 IB obligation #/amount not entered by using OBLIGATION DATA option in v4
254Canteen, not processed
255 Warehouse is not defined for this station
256IFCAP V5 RECONVERT FND/CPF-DOCUMENT STARTS at
257IFCAP V5 RECONVERT FND/CPF-DOCUMENT ENDS at
258The above 'station-fcp' GENERAL POST fund control points have active status and the dummy 'GPFS FMS CONVERSION' has no ACCOUNTING ELEMENTS
259The above 'station-fcp' SUPPLY FUND control points have active status and have no ACCOUNTING ELEMENTS.
260You must correct this before you run option 3 or 4.
261DELETE CONVERSION MO/SO RECORD STARTS
262Conversion Original Entry
263Conversion Modification Entry
264DELETE CONVERSION MO/SO RECORD IN FILE 2100.1 DONE! AT
265IFCAP ENVIRONMENT CHECK STARTS:
266IFCAP PACKAGE ENVIRONMENT CHECK DONE!
267IFCAP PACKAGE ENVIRONMENT CHECK FAILS:
268REINDEX SPECIAL CONTROL POINT INDEX 'AD' STARTS AT
269REINDEX SPECIAL CONTROL POINT INDEX 'AD' ENDS AT
270Your site must install IFCAP v5 before running this patch routine.
271If your site has substations and you are not a Conversion III site, run
272If your site has substations and you are a Conversion III site, run
273If your site has no substations and you are a Conversion III site, run
274 DO NOT run ANY Options.
275Select IFCAP V5 option
276Submit the File 442 Conversion & Generating FMS Doc. to the TASK MANAGER
277 Substation Option
278Ready to run the selected option(s) '
279No substations are in file, use substation ENTER/EDIT to add first.
280NOTE: Please schedule this task with a date '10/14/95'.
281IFCAP V5 CALM CODE SHEET CONVERSION SUBMITTED TO TASK MANAGER AT
282IFCAP V5 CALM CODE SHEET CONVERSION HAS TASK NUMBER
283It is too early to run the CALM code sheet conversion.
284Please run after 10/13/95.
285Nothing in file. You must run this list after Option 3 has completed
286CALM CODE SHEET CONVERSION EXCEPTION LIST
287STATION #
288ABORTED BY '^'!
289ALL DONE!
290 PURCHASE ORDER DATE:
291Select 2237/1358 Request:
292Select Purchase Order:
293IFCAP V5 CALM CODE SHEET CONVERSION TOO EARLY^IFCAP V5 CALM CODE SHEETS CONVERSION USER
294Please run this CALM code sheet conversion after 10/13/95.
295IFCAP V5 calm code sheet conversion starts at
2961////IFCAP V4 PO 1996 CALM CODE SHEET;2///^S X=
297IFCAP V5 CALM CODE SHEETS CONVERSION DONE^IFCAP V5 CALM CODE SHEETS CONVERSION USER
298IFCAP V5 CALM code sheets conversion done. Total FMS documents =
299IFCAP V5 CALM code sheet conversion ends at
300 - 1995 or earlier P.O. with Amendment, no FMS-doc generated.
301No entry found in File 442!!!
302Conversion III/CALM Code Sheet
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.