Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Normal
Revision Log

WV-DIALOG-0365.txt@ 1098

Last change on this file since 1098 was 604, checked in by George Lilly, 15 years ago
Internationalization
File size: 10.9 KB

Rev	Line
[604]	1	English French Notes Complete/Exclude
	2	Contacts
	3	by Division Spreadsheet Report
	4	Issues
	5	Site is not multi-divisional for Patient Representative - no report created.
	6	Service/Discipline
	7	Patient Rep Service Report
	8	This option will allow the user to open, close, or delete
	9	a Patient Representative Contact record
	10	Reports of Contact cannot be resolved without Issue Code(s).
	11	for each Issue Code.
	12	SURE YOU WANT TO DELETE THE ENTIRE *
	13	* CONSUMER CONTACT
	14	Code not found. Try again
	15	Must be on or after the contact date:
	16	and not later than:
	17	Select ALL Divisions?
	18	Enter Division:
	19	QAM
	20	Enter the fields you wish to sort on.
	21	Maximum of two sort fields reached!!
	22	Select next field to sort on.
	23	Maximum two sort fields allowed.
	24	* indicates already selected.
	25	Sort selection #
	26	Exiting without a report.
	27	Enter the fields you wish to print.
	28	Maximum of four print fields reached!!
	29	Select next field to print on.
	30	Maximum four print fields allowed.
	31	Print selection #
	32	Select DATA ELEMENT:
	33	QAM ELEMENT
	34	You have previously chosen `
	35	' to print.
	36	' to sort on.
	37	Enter a number between 1 -
	38	You have not selected any sort or print data.
	39	Do you wish to exit the program
	40	for Yes,
	41	for No
	42	Enter the beginning and ending values for PATIENT NAME.
	43	Start with: First//
	44	Names must start in uppercase, with or without a comma. Between 1-30 characters long.
	45	End with: Last//
	46	The beginning name must fall before the ending name in the alphabet.
	47	QAM PAT
	48	Monitors must start in alphanumerics. Between 1-30 characters long.
	49	The beginning Monitor must fall before the ending Monitor.
	50	QAM MON
	51	Enter the special report header, if desired (maximum 55 characters):
	52	Exceeds 55 characters!!
	53	Enter the special report header.
	54	AD HOC FALL OUT REPORT
	55	Generate Fall-Out reports.
	56	Request queued!
	57	Request cancelled!
	58	QAM DATE
	59	QAM DLMNT
	60	HEAD(0)
	61	PARRY(
	62	PARRAY(
	63	SARRY(
	64	SARRAY(
	65	QAM IEN
	66	QAM SUB
	67	Monitor:
	68	Event Date:
	69	Creation Date:
	70	QAM TEMP
	71	The 'Start with' date must fall before the 'End with' date.
	72	The 'Start with' number must fall before the 'End with' number.
	73	The 'Start with' value must fall before the 'End with' value in the alphabet.
	74	Clinical Monitoring System
	75	Monitor Code
	76	Monitor Title
	77	Standard of Care
	78	Clinical Indicator
	79	Rationale
	80	Explain Rationale
	81	Auto Enroll Monitor
	82	Monitor Status
	83	On/Off Switch
	84	Condition
	85	Time Frame
	86	Min Samp/Alert Lev
	87	Threshold
	88	Hi/Lo Percent
	89	Daily Fall Out List
	90	Threshold Met Bulletin
	91	End Of Time Frame Bulletin
	92	Min Samp/Alert Lev Met Bulletin
	93	Bulletin Mail Group
	94	Mail Group Desc
	95	Mail Group Menber
	96	Allow Duplicate Fall Outs
	97	Other Data To Capture
	98	* This option DELETES selected data from the Monitor History file *
	99	* Once the data has been deleted it CANNOT BE RECOVERED *
	100	* This option DELETES selected data from the Fall Out file *
	101	* Once the data has been deleted it CANNOT BE RECOVERED *
	102	* Once the data has been deleted it CANNOT BE RECOVERED *
	103	Ready to DELETE, are you sure
	104	Enter Y(es) to delete the selected data, or
	105	Enter N(o) to exit without deleting the data
	106	Select the monitors to delete.
	107	QAM MONITOR
	108	Select the date range to delete.
	109	QAM*
	110	QAQ*
	111	Purge the
	112	MONITOR HISTORY
	113	FALL OUT
	114	AUTO ENROLL RUN DATES
	115	QAM CONDITION
	116	QAM FALL OUT
	117	QAM SAMPLE
	118	QAM SERVICE
	119	QAM MONITOR TOOL 1
	120	QAM MONITOR TOOL 2
	121	CLINICAL MONITORING SYSTEM
	122	Division by zero!
	123	AUTO ENROLLED FALL OUT
	124	Zero fall outs for the
	125	Total number of Fall Outs is:
	126	Fall Out sample size is:
	127	Percent Fall Out:
	128	DAILY FALL OUT REPORT
	129	* Monitor data not found *
	130	CODE:
	131	* Auto enroll has found important site parameters to be missing *
	132	* Use the 'Site Parameters Edit' option to enter the necessary data *
	133	Want to run auto enroll for specific monitors
	134	* No monitors selected *
	135	Want to run auto enroll for specific services
	136	* No services selected *
	137	Enter the date range you want auto enroll to scan
	138	* Start and end dates must be T-1 or earlier *
	139	Queue auto enroll to run at:
	140	Queueing time must be between
	141	Queueing auto enroll, please wait
	142	Want a report of the dates when auto enroll will run
	143	Rerun auto enroll for a given date range
	144	Manually queued auto enroll run dates report
	145	MANUALLY QUEUED AUTO ENROLL RUN DATES
	146	QUEUED TO RUN
	147	TASK NUMBER
	148	LOWER AGE LIMIT
	149	UPPER AGE LIMIT
	150	LOOK BACK DAYS
	151	Enter the number of days the condition should 'look back'.
	152	While trying to find a fall out for this monitor.
	153	Press 'RETURN' for ALL ward locations.
	154	Enter a GROUP name that contains MAS ward locations.
	155	ENTER THE TYPE OF DATE
	156	0 AUTO ENROLL DATE
	157	1 DISCHARGE DATE
	158	Enter the date you wish to be
	159	associated with this condition.
	160	Enter a 'RETURN' for the AUTO ENROLL DATE.
	161	TREATING SPECIALTY GROUP:
	162	Press 'RETURN' for ALL treating specialties.
	163	Enter a GROUP name that contains a MAS treating specialty.
	164	0 AUTO ENROLL DATE
	165	MOVEMENT TYPE GROUP:
	166	Press 'RETURN' for ALL MAS movement types.
	167	Enter a GROUP name that contains MAS movement type.
	168	DAYS BETWEEN DISCHARGE AND ADMISSION
	169	Enter the number of QAMDAYS between the patient's last discharge
	170	and current admission.
	171	Enter a GROUP name that contains MAS treating specialties,
	172	or press 'RETURN' for all treating specialties.
	173	or press 'RETURN' for all ward locations.
	174	2 APPLICATION WITHOUT EXAM
	175	Choose any or all that you wish to monitor, e.g. 0,1 or 0-2, etc.
	176	Press RETURN for all status types.
	177	3 OUTPATIENT MEDICAL
	178	4 OUTPATIENT DENTAL
	179	5 NURSING HOME CARE
	180	Press RETURN for all benefit types.
	181	TYPE OF CARE APPLIED FOR
	182	2 PLASTIC SURGERY
	183	5 ALL OTHER
	184	Press RETURN for all care types.
	185	DISPOSITION GROUP:
	186	Enter a GROUP name that contains MAS disposition types.
	187	press 'RETURN' for all disposition types.
	188	CLINIC GROUP:
	189	Enter a GROUP name that contains MAS clinics.
	190	Press 'RETURN' for all clinics.
	191	2 C CANCELLED BY CLINIC
	192	3 NA NO-SHOW & AUTO RE-BOOK
	193	4 CA CANCELLED BY CLINIC & AUTO RE-BOOK
	194	5 I INPATIENT APPOINTMENT
	195	6 PC CANCELLED BY PATIENT
	196	7 PCA CANCELLED BY PATIENT & AUTO RE-BOOK
	197	3 SCHEDULED VISIT
	198	4 UNSCHEDULED VISIT
	199	Press RETURN for all purpose of visit types.
	200	APPOINTMENT TYPE GROUP:
	201	Enter a GROUP name that contains MAS appointment types.
	202	Press 'RETURN' for all appointment types.
	203	while trying to find a fall out for this monitor.
	204	COUNT SAMPLE SIZE BY
	205	Choose one or more of the following:
	206	2 Transfers to (interward)
	207	4 # in-house at beginning of time frame
	208	5 # in-house at ending of time frame
	209	Enter your selections separated by commas, e.g., 1,4
	210	3 # in-house at ending of time frame
	211	Select one of the codes listed.
	212	PATIENT TYPE LIST
	213	3 ALL PATIENTS
	214	WARNING: NUMBER 3 WILL SELECT EVERY PATIENT IN DHCP !!
	215	Press RETURN for INPATIENTS and OUTPATIENTS.
	216	SERVICE/SECTION GROUP:
	217	Enter a GROUP name that contains MAS service/sections,
	218	or press 'RETURN' for all service/sections.
	219	QAMLRDAT=
	220	LAB TEST:
	221	Enter the name of an individual lab test whose result you want to monitor.
	222	STARTING VALUE
	223	ENDING VALUE
	224	* Ending value must be greater than or equal to the starting value *
	225	ICD DIAGNOSIS GROUP:
	226	Enter a GROUP name that contains ICD diagnoses.
	227	press 'RETURN' for all ICD diagnoses.
	228	ICD PROCEDURE GROUP:
	229	Enter a GROUP name that contains ICD procedures.
	230	press 'RETURN' for all ICD procedures.
	231	HOSPITAL LOCATION GROUP:
	232	Enter a GROUP name that contains MAS hospital locations.
	233	Press 'RETURN' for all hospital locations.
	234	SECLUSION/RESTRAINT TYPE GROUP:
	235	Enter a GROUP name that contains types of seclusion or restraints.
	236	Press 'RETURN' for all types of seclusion and restraints.
	237	REASON FOR S/R GROUP:
	238	Enter a GROUP name that contains reasons for seclusion/restraint.
	239	Press 'RETURN' for all reasons.
	240	MAXIMUM TIME IN S/R (HOURS)
	241	Enter the maximum number of hours the patient may be held
	242	in seclusion/restraint. Patients in S/R for more than
	243	this amount of time will be captured.
	244	Enter a number from 1 to 96.
	245	DRUG CLASS GROUP:
	246	Enter the DRUG CLASS group you wish to monitor. All 'TODAY-1'
	247	fills will be scanned for duplicate fills for this group.
	248	PATIENT GROUP:
	249	Enter the PATIENT GROUP you wish to monitor.
	250	LAST DIGIT(S) OF SSN
	251	MAS MOVEMENT TRANSACTION TYPE:
	252	Enter the MAS transaction type of interest.
	253	TYPE GROUP:
	254	Enter a GROUP name that contains MAS
	255	movement types
	256	Enter a MAS
	257	movement type GROUP, or
	258	press 'RETURN' for all
	259	Enter the LOS from the date of the patient's admission.
	260	Enter the length of stay from 1-365 days.
	261	a treating specialty.
	262	Enter the treating specialty length of stay from 1-365 days.
	263	press 'RETURN' for all treating specialties.
	264	Enter the ward length of stay from 1-365 days.
	265	press 'RETURN' for all ward locations.
	266	FALL OUT MONITOR:
	267	Enter the monitor you want this condition to scan.
	268	1 FALL OUT DATE
	269	Select MONITOR TO COPY:
	270	Copy of
	271	' already exists! ***
	272	Are you sure you want to copy this monitor
	273	Answering Y(es) produces a duplicate copy of the selected monitor
	274	which you may then edit. Answering N(o) takes you back to the
	275	previous prompt.
	276	Copying monitor, please wait...
	277	;7///UNDER CONSTRUCTION;54///OFF
	278	You may now edit the copy of the monitor, please change the CODE and TITLE.
	279	You may enter '?CONDITION' (e.g., ?AGE) at the 'Select CONDITION:'
	280	prompt to see a description of a condition or range of conditions.
	281	Enter '?*' to see the descriptions for all conditions.
	282	7//UNDER CONSTRUCTION
	283	Select RATIONALE:
	284	Select TIME FRAME:
	285	* THIS MONITOR IS STILL UNDER CONSTRUCTION, CANNOT CONTINUE *
	286	* THIS MONITOR'S ON/OFF SWITCH IS TURNED OFF, CANNOT CONTINUE *
	287	* NO TIME FRAME FOUND FOR THIS MONITOR, CANNOT CONTINUE *
	288	Date for SAMPLE SIZE data:
	289	* OUTSIDE START/END DATE RANGE OF MONITOR *
	290	*** START DATE:
	291	END DATE:
	292	* NO START/END DATE FOR TIME FRAME, CANNOT CONTINUE *
	293	SAMPLE SIZE data was last edited:
	294	Current FALL OUTS:
	295	Current SAMPLE SIZE:
	296	Add/Subtract SAMPLE SIZE (-1000000 -> 1000000):
	297	Enter the number you wish to add to or
	298	subtract from the current SAMPLE SIZE.
	299	New SAMPLE SIZE:
	300	EVENT DATE:
	301	Searching FALL OUT file for this patient/monitor...
	302	No fall outs found for this patient/monitor.
	303	#################### #################### ####################
	304	#################### #################### ####################
	305	#################### #################### ####################
	306	#################### #################### ####################
	307	#################### #################### ####################

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0365.txt@ 1098

Download in other formats: