source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0428.txt@ 1483

Last change on this file since 1483 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 11.4 KB
Line 
1English French Notes Complete/Exclude
2 B) Both Traumatic and Non-traumatic
3EXTENT OF INJURY
4 Select Injury:
5 Extent of Injury:
6PRIMARY CARE VA
7Primary Care VA:
8Enter a Facility from the list shown
9ADDITIONAL CARE VA
10Additional Care VA:
11ANNUAL REHAB VA
12Annual Rehab VA Facility:
13Enter a Division from the list shown
14PERFORM
15RUN ROUTINE
16REQUEST STRING
17SPNPARM(
18No task number.
19Has been task to run at
20Routine :
21Time set to run:
22If you are not happy with the run time you
23can reschedule it for another time.
24Routine not found on disk..
25No task time
26The data extract at
27 didn't arrive correct.
28Resubmit it with the correct sting.
29XMRG value was
30SPND0)
31SPND0,0)
32To deselect an
33Registry
34Outcomes
35 Record to Delete:
36OK to delete this record:
37Enter Y(es) to delete this record.
38Enter N(o) to leave this record as is.
39Enter ^ to exit this option.
40Enter Y(es), N(o), or ^.
41Sending deletion notification to the
42 mail group...
43The following patient
44 deleted from the
45 file on
46 File Deletion Notification
47<SCD Registry Package>
48This patient has Outcome records on file and they must be removed before
49we remove the patient from the REGISTRY file.
50The removal cannot be reversed!
51Registry & Outcomes
52Registry entry
53CONVERT BLOOD COMPONENT INFORMATION (SURGERY)
54The conversion of blood component information in Surgery is
55SURGERY,CONVERSION
56SURGERY POINTER CONVERSION COMPLETED
57 The conversion of blood component information in Surgery V.3.0
58This process completed in
59 entries were found that could not be converted.
60These entries could not be converted because the associated
61entry in the BLOOD PRODUCT file no longer exists.
62The list of site parameters that could not be converted
63 is contained in ^XTMP(
64 pointed to blood product
65The list of cases that could not be converted
66In coordination with your Lab and Surgery ADPACs, determine
67if you have the information required to rebuild these blood
68products. If so, you may rebuild them and re-run the conversion.
69To re-run the conversion, type:
70 D ENNV^SR00109 at the programmer's prompt.
71SR*3*103 Post-Install
72 Post-install process queued...
73TST.
74UTL.
75Surgery Quarterly Report
76extubation after general anesthesia. This may be diagnosed as congestive
77heart failure, pulmonary edema and/or Adult Respiratory Distress Syndrome
78(including autologous) given up to 72 hours after the patient leaves the
79operating room.
80ISC.
81Patch SR*3*47 Install Message
82SR*3.0*47
83Patch SR*3*47 has been installed at
84SR*3*47 Installed
85SRMSG(
86SURGERY RISK ASSESSMENT RETRANSMISSION COMPLETE FOR VAMC-
87G.SURGERY DEVELOPMENT TEAM@ISC-BIRM.VA.GOV
88Surgery Risk Assessment Retransmission Routine
89SR*3*62 - NSQIP Transmission
90*** SR*3*62 ASSESSED FROM VAMC-
91G.RISK ASSESSMENT@
92*** SR*3*62 EXCLUDED FROM VAMC-
93SRO QUARTERLY REPORT
94SRO-CHIEF REPORTS
95SROQ MENU
96TRN.
97** SR*3*81 FROM VAMC-
98The following completed/transmitted non-cardiac assessments have been
99updated to incomplete. Please review patient demographic information and
100complete these assessments again.
101ASSESSMENTS CHANGED TO INCOMPLETE
102G.RISK ASSESSMENT
103 OPERATION DATE:
104Surgery Risk Assessment Retransmission
105TROPONIN I
106TROPONIN T
107** SR*3*88 FROM VAMC-
108Surgery FY99 Workload Reports
109This category should be selected if a procedure to cut into the trachea
110and insert a tube to overcome tracheal obstruction, or to facilitate
111extended mechanical ventilation, was performed during the postoperative
112NEW MECHANICAL CIRCULATORY SUPPORT^^^Y
113This category should be selected if the patient left the operating suite
114while dependent upon IABP or VAD for circulatory support postoperatively,
115even if the pump is only used for a short time postoperatively. However,
116this category is only appropriate if the patient did not enter the OR
117with mechanical circulatory support.
118NEW MECHANICAL CIRCULATORY SUP
119PERIOPERATIVE OCCURRENCE CATEGORY^136.5I^34^34
120SR*3*95 - ASA Class Conversion Completed
121Surgery ASA Class conversion is completed.
122SRTXT(
123Surgery ASA Class Conversion
124 ASA Class conversion process queued...
125G.CARDIAC RISK ASSESSMENTS@DENVER.VA.GOV
126** SR*3*95 FROM VAMC-
127Enter Blood Product Identifier
128Enter or scan the Blood Product Unit Id
129No date/time unit assigned
130 **NO DATE/TIME UNIT ASSIGNED **
131Not Assigned
132Today's date exceeds the blood product expiration date.
133 Unit ID:
134Select the blood product matching the unit label
135**NO DATE
136 There is no 'DATE/TIME Unit Assigned' for this entry.
137No Discrepancies Found
138There is no record that this unit has been assigned to this patient.
139 Please recheck the patient and blood product IDs.
140Do you want to scan another product (Y/N)
141IMRQ*
142(WORD PROCESSING)
143OTHER PROCEDURES
144Enter Screen Server Function:
145To change entries, enter your choices (numbers) separated by a ';', or use
146a ':' for ranges. i.e. 2;3 or 1:3. Enter 'A' to enter/edit all.
147If there is more than one page to this screen, entering '+' or '-' followed
148by the number of pages or entering 'P' followed by the page number will
149take you to the desired page.
150Enter '^' to quit, or '^^' to return to the menu options.
151Forget it.
152DX(3)=
153 WILL ENTER THE CHARACTER UNDERNEATH, SPACE BAR ENTERS THE NEXT WORD
154 TO ENTER NEW TEXT AT CURSOR, RETURN TO EXIT
155IOINHI;IOINLOW;IORVON;IORVOFF;IOEDEOP;IOELEOL
156N to enter only the top level of this multiple, or the number
157of your choice followed by an 'R' to make a duplicate entry.
158No need to ask, we will continue.
159Surgery Interface Table Setup Menu
160This option allows the users to populate table files on the Automated
161Anesthesia Information System.
162This option sends a message to the Automated Anesthesia Information System (AAIS) informing the system to replace its current field setting with the current VISTA field setting.
163REPLACEMENT FLUID^133.7
164ANES SUPERVISE CODE^132.95
165Surgery Interface File Download Option
166Enter file to Capture
167Enter the files corresponding number
168Queuing message
169 Master File Update.
170CNT(
171Checking the SURGERY HL7 Environment
172Warning: *** There is no default Institution. ***
173HL7 V. 1.6 must be installed prior to installing this package.
174Environment check was successful!!
175Environment checker was aborted!!
176SR SURGERY
177 Sending HL7 Master File
178Reactivation
179SR Staff Master File Notification
180SR Other Master File Notification
181SR Unsolicited transmission of VistA Requested Observation
182Sending an observation result message for case #
183Unknown Surgery Case Number in
184Unknown Surgery Case Number (
185Unknown OBR identifier (
186) for case #
187Invalid OBR identifier (
188SSN mismatch for Surgery Case #
189. Surgery Patient
190) is being sent with invalid ID (
191SRHL DISCREPANCY
192SR AAIS
193Adding the Surgery NON-DHCP HL7 Application SR AAIS.
194SURGERY HL7 SETUP IS COMPLETE.
195Adding the HL7 Application
196 to file 771
197SR
198 Adding SR
199Failure SR
200Updating the PROTOCOL file (#101) with the new TCP/IP connect
201SR Receiver of Appointment Cancellation
202SR Receiver of Appointment Deletion
203SR Receiver of Appointment Modification
204SR Receiver of Appointment Rescheduling
205SR Receiver of Master File Notification
206SR Receiver of New Appointment Booking
207SR Receiver of Observation Unsolicited
208SR Receiver of Scheduling Query
209SR Receiver of Staff Master File Notification
210SR Receiver of Unsolicited Requested Observation
211Schedule Information Unsolicited
212Schedule Query Response
213Master File Notification
214Notification of New Appointment Booking
215Notification of Appointment Rescheduling
216Notification of Appointment Modification
217Notification of Appointment Cancellation
218Notification of Appointment Deletion
219Query - Schedule Information
220Master File Not Otherwise Specified
221Staff/Practitioneer Master File
222This mail group is used by the Surgery Interface ORU receiver routine to
223report message discrepancies. The discrepancies will include invalid file
224values for certain files, as well as invalid text identifiers from the
225SURGERY INTERFACE PARAMETER file (#133.2).
226Mail Group SRHL DISCREPANCY installed
227No cases scheduled for date requested
228Invalid or Missing QRF segment
229Invalid or Missing QRD segment
230Invalid Patient Name or SSN
231Invalid Patient Name - not found in Surgery application
232Missing request date for surgical cases
233Enter the new setting
234This setting does not correspond to the upper level setting.
235 Press <RETURN> to continue:
236Surgery Interface Setup Menu
237To change the setting in one of the following categories, enter the
238corresponding number.
239 (S/R - Send and Receive)
240NO:1:CNT
241Enter the corresponding number of the category you wish to edit. To edit underlying fields, set the category to R for receive or S to send.
242The categories above refer to VISTA Surgery data fields. Below are examples:
243OPERATION -> File 130 fields.
244TOURNIQUET -> TIME TOURNIQUET APPLIED (#.48) and File 130.02 fields.
245MONITOR -> MONITORS (#.293) and File 130.41 fields.
246MEDICATION -> MEDICATIONS (#.375) and File 130.33 fields.
247ANESTHESIA -> ANESTHESIA TECHNIQUE (#.37) and File 130.06 fields.
248Toggle the current setting to (R)eceive, (S)end, or (I)gnore.
249NO:1:CNT(SROBR,0)
250To toggle the current setting of an item, enter its corresponding number.
251Do you wish to change the current setting of
252These items correspond to fields in the VISTA Surgery package.
253The items above refer to VISTA Surgery package fields. Below are examples:
254 HR -> End Pulse (#.84)
255 BP -> End BP (#.85)
256 RR -> End Resp (#.86)
257Invalid Name.
258Not a valid entry in file 200.
259HL7 Message #
260 contains Surgery application discrepancies.
261G.SRHL DISCREPANCY
262Default institution must be defined as a Surgery site in the SURGERY
263SITE PARAMETERS file (#133) before this parameter can be updated.
264This option may be used to edit the site parameter that determines which
265Surgery HL7 interface will be used, the interface compatible with VISTA HL7
266V. 1.6 or the older one compatible with VISTA HL7 V. 1.5.
267If applications communicating with the Surgery HL7 interface must use the
268interface designed for HL7 V. 1.5, enter YES. Otherwise, enter NO or leave
269this field blank.
270Invalid sequence this NTE segment, '
271Unknown OBX identifier (
272MEDICAL SPECIALTY
273SURGEON PGY
274ANES SUPERVISE CODE
275PATIENT CLASS
276Body Weight
277CANCEL REASON
278NON OR
279ATTEND PROVIDER
2801ST ASST.
2812ND ASST.
282ATT. SURGEON
283PRIN. ANES.
284ANES. SUPER.
285RELIEF ANESTHETIST
286ASSISTANT ANESTHETIST
287TOURNIQUET APPLIED BY
288MONITOR APPLIED BY
289EXTUBATED BY
290MEDICATION ORDERED BY
291MEDICATION ADM BY
292Invalid Master File Identifier or Event Code.
293NO ERROR
294Invalid segment
295 in message
296 does not match SSN,
297DR
298OBR DR
299Missing OBR identifier
300Invalid OBR identifier
301NULL Case Number
302Invalid Surgery Case Number
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.