English	French	Notes	Complete/Exclude
EG:  50,100,500 will create 4 groups: 1-49, 50-99, 100-499 & 500 and above.			
Enter them now: 			
Initialize time stamps in queue (necessary 1st run): NO// 			
Run at 30-minute intervals !!			
This is the interval that backgroud tasks will be rescheduled.			
Long intervals may not pick up any data.  Short intervals are best,			
because the times collected may be off by as much as the interval for the			
interval a message was in the queue for.  ENTER THE NUMBER OF SECONDS !			
  Enter a time in seconds			
  Intervals must be at least 5 minutes apart.			
  Intervals must be less than 1/2 hour.			
How many times do you want to analyze the message delivery queue: 4//			
The analysis will be automatically rescheduled this number of times.			
Type in a number between 0 and 9999999.			
I am queuing this job to run on the next half-hour.  It will run every half-hour			
on the hour until the task is deleted or it is stopped by setting			
QUEUED !!! TASK # 			
XMMGR-DELIVERY-STATS-COLL			
Analysis of queue starts now !!!			
Stats collected.  If you would like them to be collected automatically			
every 1/2 hour, please schedule this option via TaskMan.			
START Date			
END Date			
Calling FileMan template ...			
 MailMan Activity Report			
Report on Statistics			
 No Future Dates !!!			
Active Users/Deliveries Report			
Deliveries by Group Report			
Length of Delivery Queues Report			
Active Users,Lines Displayed,Message & Response Deliveries,Queue Lengths,Response Time			
Enter normalized 			
Checking Delivery Queue: 			
NOTHING IS IN THE DELIVERY QUEUE !!			
Total items Waiting to be delivered: 			
Messages: 			
Message Deliveries: 			
   Response Deliveries: 			
Message Group      # Messages    # Deliveries			
Response Group     # Responses   # Deliveries			
XM FWD ADDRESS CHECK			
 Scanning VMS interactive users...............			
 Scanning VMS batch users (ZSLOT) ............			
 VMS logins = 			
 VMS Batch jobs running = 			
 TOTAL Interactive and Batch users = 			
Error has occurred during processing.			
DISUSER: 			
Process aborted.			
XMBX Global 'AI' Node empty!			
Kill all XMBX 'AI' nodes older than			
We will kill all nodes older than 			
***** Starting at 			
Nodes Reviewed:			
Nodes Killed:			
Nodes Remaining:			
***** Finished at 			
XM GROUP EDIT MASTER			
XM FWD ADDRESS DELETE			
last used MailMan			
VA MailMan 			
SHOW INST			
SHOW TITL			
SHOW DUZ			
ASK BSKT			
TITL SRC			
Null addressee			
DdHh			
XMSTAR LIMITED			
* (Limited Broadcast)			
PARM IEN			
TYPE IEN			
first last			
XM GROUP ERROR			
GK.VA.GOV			
NET REPLY			
NET SUBJ			
\027||1|, your Help Request from, |2|,			
XMGRP*			
XMTO*			
XM GROUP EDIT NOTIFY			
SUBJ;DATE			
XMIT PRI			
new messages			
Re: original msg subject			
reply to			
XM GROUP PRIORITY			
$TXT Created by			
$TXT PACKMAN BACKUP			
$TXT ^Created by			
The name of 			
the IN			
the WASTE			
 basket may not be changed.			
Error with $$MULTI^XMBBLOB			
place holder			
I just love Lotus, don't you?			
I just love Lotus  123			
Jun 28, 1955@10:10:00			
RETURN-RECEIPT-TO			
ENV FROM			
FROM DUZ			
FROM NAME			
DATE MM			
CRE8 MM			
SENDR DUZ			
SENDR NAME			
SUBJ X			
TO NAME			
BY DUZ			
BY NAME			
WHEN MM			
TO DUZ			
LREAD MM			
FREAD MM			
COPY MM			
TERM MM			
FDATE MM			
FAX IEN			
XDATE MM			
PATH NAME			
SDATE MM			
FWD ON			
FWD BY DUZ			
FWD TYPE			
FWD BY ORIG			
FWD TYPE ORIG			
XMMGR-IN-BASKET-PURGE			
XOB SECAV			
Unexpected Message Format			
<SecurityInfo version=			
<Response type=			
<Error code=			
<Division ien=			
login disabled			
<SetupInfo serverName='			
Server Partition State			
too many invalid sign-on attempts			
Logon Failed			
User did not complete the access/verify code login process.			
division not found for this user.			
change verify code			
User not logged on.			
FileMan Error: 			
Demographics failure			
<NameInfo prefix='			
<UserInfo duz='			
<Division ien='			
VistaLink			
SecurityInfo			
AV.SetupAndIntroText			
AV.GetUserDemographics			
AV.Logon			
AV.Logout			
AV.SelectDivision			
AV.UpdateVC			
>>> VistALink environment check completed for KIDS Load a Distribution option.			
>>> Checking environment...			
     You must first initialize programmer environment by running ^XUP.			
 Do you want to abort the installation now? 			
       If you choose to abort the installation, please do a global listing			
       of file ^DIC(18, and ^DD(18, after deleting the file to ensure that			
       the SYSTEM file (#18) is completely deleted from your system before			
       reinstalling the VistALink package.  If you need additional help			
       deleting the file, please contact National VistA Support (NVS).			
 Are you sure you want to continue? 			
       Continuing with the installation will delete the SYSTEM file (#18)			
       using the FileMan Data Dictionary Deletion call (EN^DIU2).			
 Would you like instructions on how to delete SYSTEM file (#18)? 			
XOBU FOUNDATIONS MAIN			
                    <<<      VistALink Parameters     >>>			
VistALink Version: 			
Heartbeat Rate: 			
Latency Delta: 			
                    <<< VistALink Listener Status Log >>>			
XOB LISTENERS			
Refresh to see 'RUNNING' status			
>>> Listener may take up to 60 seconds to stop <<<			
Error: ^%ZOSF(			
) node is not defined.			
Action is under construction.			
VistALink Listener on port 			
 appears to be running already.			
Unable to start VistALink Listener on port 			
Starting VistALink Listener...			
Use the TCPIP utility in VMS to enable the VistALink Listener.			
Starting the VistALink Listener is not yet supported for 			
Enter Port: 			
Choose a numeric port to 			
 the VistALink Listener on in the range of 5000-65535.			
Port not specified.  VistALink Listener not 			
Listener is not running!			
Error: Site parameter file not initialized.			
FOUNDATIONS SITE PARAMETERS			
FOUNDATIONS SECURITY PROVIDER			
XOBS VISTALINK SECURITY			
.01///VISTALINK SECURITY			
IF $P(^(0),U,2)=			
VISTALINK LISTENER CONFIGURATION			
XOB RPC			
TIMED OUT			
ERROR TYPE			
FAULT CODE			
FAULT STRING			
FAULT ACTOR			
Server			
System Error			
<Error type=			
<VistaLink messageType=			
DO ^%ZTER HALT			
$VISTALINK HANDLER$			
VistALink: Server			
DO SYSERR^XOBVLL			
D ^%ZTER HALT			
 DO KILL^XOBVLL G NXTCALLQ^XOBVLL			
Ping Successful!			
Returned Input Value: 			
<?xml version='1.0' encoding='utf-8' ?>			
   <fruit color='yellow' >banana</fruit>			
   <fruit color='red' >apple</fruit>			
   <fruit color='orange' >orange</fruit>			
XOB VL TEST			
<no RPC prefix defined>			
RPCs Starting with '			
) entries found.			
>>> Scheduling the XOBV LISTENER STARTUP option...			
XOBV LISTENER STARTUP			
>>> Error: Option XOBV LISTENER STARTUP was not created in the OPTION (#19)			
           file during the KIDS installation.  Please reinstall.			
>>> The XOBV LISTENER STARTUP option has previously been scheduled:			
>>> The XOBV LISTENER STARTUP option has been scheduled as follows:			
>>> Error: There was an error scheduling the XOBV LISTENER STARTUP option.			
           Please schedule this option using 'Schedule/Unschedule Options'			
           in the Taskman Management menu.			
No message type defined			
No entry for message type [			
Invalid interface routine specified [			
DO REQHDLR^			
DO READER^			
DO CALLBACK^			
DO 			
single call			
Request Manager not defined			
Request Manager			
VL VERSION			
RPC NAME			
[No RPC]			
RPC CONTEXT			
<!DOCTYPE vistalink [<!ELEMENT vistalink (results) ><!ELEMENT results (#PCDATA)><!ATTLIST vistalink type CDATA 			
Gov.VA.Med.RPC.Response			
 ><!ATTLIST results type (array|string) >]>			
Internal Application Error			
RpcHandler			
RPC HANDLDER VERSION			
##Unkown RPC##			
RpcContext			
Param			
Params			
XOB CLIENT			
CLOSE MESSAGE			
XOB SYSTEM			
XOB DSM CONNECT FAILURE			
VistALink Listener			
Listener on port 			
 has been asked to stop!			
Before running this entry point set your debugger			
to stop at the place you want to debug.			
Some possible spots to use:			
     o  SERV+1^XOBVTLS  => where debugging starts			
     o  SPAWN+1^XOBVLL  => where VistALink spawn starts			
     o  or location of your choice.			
IP Socket to Listen on ('^' to quit): 			
Socket number not entered...debug listener not started.			
Starting listener at port 			
Listener stopped on port 			
Debug mode started...			
error number^text			
Free Text			
Numeric			
Yes/No			
Parameter must be entered before the value.			
Parameter Description: 			
Instance			
 Field Description:			
REF=$G(			
Duplicate parameter names not allowed.			
Duplicate template names not allowed.			
--- Edit Parameter Values ---			
Parameters set for 'Package' may be replaced if 			
is installed in this account.			
 may be set for the following:			
[choose from 			
Enter the number, name, or abbreviation of the selection.			
You may also use variable pointer syntax (Example: LOC.WEST2).			
There are currently no entries for 			
 currently exist.			
Parameter template not found.			
 is now:			
Values for 			
XPAR ALL ENTITIES			
>> BROKEN PTR TO PARAMETER (			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################