English	French	Notes	Complete/Exclude
ON THE NEXT LINE ENTER THE TEXT TO BE DISPLAYED FOR THE ALERT ___			
Is this text OK? 			
Do you want to transfer control to an option when the alert is selected			
Do you want to transfer control to a routine when the alert is selected			
Enter ROUTINE name or ENTRY^ROUTINE name: 			
Routine '			
' not present			
As currently entered, this alert will display the following text:			
The alert is currently to be delivered to:			
On selection of the alert, the user will run the routine 			
On selection of the alert, the user will be taken to the			
the option 			
Is this alert what was intended			
ALERT IS NOW SET			
Indicate the desired OPTION: 			
Enter a User name or G.mailgroup			
as recipient of the Alert: 			
Enter another user or G.mailgroup: 			
SURROGATE related to which			
NEW PERSON entry			
Select USER to be SURROGATE			
Specify Date/Time SURROGATE becomes active			
if no date/time is entered, alerts will start going to			
the SURROGATE immediately.			
Specify Date/Time SURROGATE should be removed			
if no date/time is entered, YOU must remove the SURROGATE			
to terminate alerts going to the SURROGATE			
You cannot specify yourself as your own surrogate!			
YOU are designated as the surrogate for this user - can't do it!			
This forms a circle which leads back to you - can't do it!			
You have been specified as a surrogate recipient for alerts for			
Surrogate Recipient for 			
XQAMESG(			
 is currently your surrogate			
Do you really want to REMOVE this surrogate			
You have been REMOVED as a surrogate recipient for alerts for			
Removal as surrogate recipient			
View Users who have selected a specified User as their Surrogate.			
Select User (NEW PERSON entry)			
Display users whose 			
ALERT count is at least			
How Many 			
Critical 			
Alerts			
Breakout by One or More Divisions			
Entering YES will result in the entries being grouped by DIVISION.			
Show ALL Divisions			
Entering YES will result in the analysis being performed for ALL Divisons,			
A NO will result in prompts to select which division(S) you want listed.			
If a user has more than one division			
If New Person entries have multiple divisions, entering 1 will result in			
those entries being shown only under a heading of 'These users are assigned			
to multiple divisions', while entering 2 will result in the data for a			
specific New Person entry  being shown under each division heading which			
that entry may select.			
Select the ordering of results desired			
Select a number to indicate how you would like the selected entries to be			
listed by			
 (Within Division)			
: the New Person entrie's Name; the Number of 			
Alerts,			
Alerts, 			
or by Service/Section			
Show ALL Service/Sections			
Within Service/Section order results by			
ABNORMAL IMA			
 COUNT of 			
ALERTS - users with more than 			
   for date range 			
CRIT column indicates number of CRITICAL alerts and ABNORMAL IMAGING alerts			
Service/section			
Last Sign-on			
CRIT   Alert			
<No Service>			
These users are not assigned to a division			
These users are assigned to multiple divisions			
Internal Entry number in Alert Tracking File			
List data from Alert Tracking file			
List of User Alerts			
 only alerts containing specific words or phrase(s)			
You can enter one or more words or phrases which you want to be used to			
select the alerts to be listed.  If you enter NO, all for the selected			
individual in the selected time period will be selected.  If you enter			
YES, you will be prompted to enter a word or phrase.  You will be prompted			
again, and you may enter as many word or phrase entries as you want.			
Comparisons will NOT be case specific.			
HOWEVER ALL WORDS OR PHRASES ENTERED MUST BE IN THE MESSAGE FOR AN ALERT			
TO BE SELECTED.			
Enter another set of words or phrases that should			
be matched independently of the previous entr			
ALL words or phrases connected by -AND- must appear in the			
message for an alert to be selected			
Enter a word, at least three characters long, or phrase, without regard to			
case, that you want to be required for selection of alerts to be listed.			
If more than one word or phrase are specified, ALL of them must be in alerts			
which will be listed.			
 word or phrase			
Select whether alerts listed should be alerts involving actions (2), info			
only or text only alerts (3), or both (1).			
Select Alert Type(s) desired			
The earliest date in the alert tracking file is 			
*** WARNING ***: Do not specify too many days - each entry in the Alert Tracking			
file must be checked for the date range specified.			
Selected 			
  for dates 			
Selected alerts containing:			
            and containing:			
List of Patient Alerts			
Do you want to scan for a list of dates that have at least some alerts for this patient			
The quick scan method used here will not pick up some alerts,			
but should give an indication of when alerts might be found.			
Select a period for starting			
The oldest entry in your Alert Tracking file is from 			
Dates and number of alerts found in () [may not be all of them]			
your Primary Menu			
this option			
 is out of order with the message:			
 has a reverse lock on it.			
 not allowed right now.			
 not allowed on this device.			
No option or protocol data available			
Please enter the user's name: 			
Sorry we couldn't find that user in the New Person File.			
Please enter the name of the option: 			
Sorry we couldn't find that option.			
 is not in the New Person File.			
 has an active termination date,			
or no verify code.			
 is not in the Option File.			
 does not have access to the option			
There is a lock somewhere in the menu tree 			
and the user does not hold the key 			
There is a reverse lock somewhere in the menu tree 			
and the user holds the key 			
 has access to the option 			
through the primary menu 			
through the Common Options (XUCOMMAND).			
as a top-level secondary menu option.			
through the secondary menu tree 			
XUS SIGNON			
No such option in the 			
 cross reference of the Option File.			
No such option in the Option File.			
This option is not a Client/Server-type option.			
Option out of order with message: 			
Option locked, 			
 does not hold the key.			
Reverse lock, 			
 holds the key.			
This option is time restricted.			
No RPC subfile defined for the option 			
No remote procedure calls registered for the option 			
No RPC by that name in the 			
 cross-reference of the Remote Procedure File.			
No such procedure in the Remote Procedure File.			
The remote procedure 			
 is not registered to the option 			
Remote procedure is locked.			
Remote procedure request failed rules test.			
 does not have access to option 			
Your menus are being rebuilt.  Please try again later.			
Select HELP SYSTEM action or <return>: 			
No help frame exists			
RELATED HELP FRAME			
* - Recently viewed help frame			
[No help frame exists]			
Select from (1 to 			
Please assign related frames to these new keywords: 			
The following keywords do not appear in text. You may wish to delete.			
Select one of the following responses: 			
<return> - to back up a level			
Bracketed 			
Highlighted 			
or number			
 to indicate a related help frame			
'^Q' - to quit the help system			
'^R' - to refresh this frame			
table of related frames			
on/off switch for bracketing/reverse video of keywords			
'^H' - to see how you got here			
'^E' - to edit the content of this frame.			
'EN' - to edit the name			
'EH' - to edit the header			
'ET' - to edit the text			
'ER' to edit the related frame list			
HOW DID I GET HERE?			
Brackets will now be used for keywords.			
Terminal type is not defined.			
REVERSE VIDEO			
 will now be used for keywords.			
Reverse video not available for this terminal type.			
Select PACKAGE name: ALL// 			
HELP FRAME 			
 POINTS TO HELP FRAME 			
 WHICH DOES NOT EXIST 			
CROSS REFERENCE OF HELP FRAMES BY PARENTS			
HELP FRAME XREF BY PARENT			
Select primary HELP FRAME from which to list: 			
Select LISTING FORMAT: TEXT ONLY// 			
XQHELP-LIST-FORMAT			
TtRrCc			
Enter '?' for HELP			
TEXT ONLY			
RELATED FRAMES			
PRINT HELP FRAMES			
   i  ii iii  iv   v  vi viiviii  ix   x  xi xiixiii xiv  xv xvixvii			
The Help Frame '			
' is not unique or was not found.			
RELATED FRAME			
*  - KEYWORD MISSING FROM TEXT			
** - RELATED FRAME MISSING FROM LIST			
HELP FRAME LISTING			
TABLE OF CONTENTS			
  **> Press 'RETURN' to continue, '^' to stop, or '?[option text]' for more			
'     Option name: 			
  **> Extended help available.  Type 			
 to see it.			
**> Sorry, no help text available for this option.			
  Shall I show you your secondary menus too			
**> Your secondary options <**			
  Would you like to see the Common Options			
**> The Common Options, options available to everyone <**			
Enter a menu tree by number : 			
Please enter the parent menu: 			
No keys need to be given to this user for this menu tree.			
is one 			
are some 			
locked option			
 Option Name			
Option Text			
Locked With			
This is the current set of keys we are working with: 			
Please enter one of the following codes:			
'A' means allocate these keys			
'D' means delegate this key set			
'E' to edit the set of keys you wish to allocate			
'^' or 'RETURN' to quit			
'L' to list the locked options again, or			
'S' to show the set of keys you are allocating again.			
Enter A, D, E, ^, L, or S: 			
AaDdEe^LlSs			
 has no primary menu.			
Primary Menu			
==> A key named 			
Enter one of the following codes followed by key name(s): 			
'-' (minus) to remove a key from the set			
(For example 			
'+' (plus) to add a key to this set of keys			
'S' to show the current key set			
'RETURN' to end the editing session			
'^' to quit thiogram altogether			
Enter -KEY, S, or ^ :			
Hit 'RETURN' to continue, '^' to stop.			
Enter a short name for this set of options and or protocols: 			
Enter a name of 20 characters or less for this set, '^' to quit, or '??' for help			
XQOO-NAME			
Out-of-order sets must be named with 20 or less characters.  Enter '^' to quit.			
WARNING: The Out-of-order set '			
' already exists.			
Do you want to modify it? (Y/N) 			
What should the Out Of Order message text be? :			
This is the message that will be shown with the options/protocols			
that are made out of order. For instance, 			
Laboratory install in progress			
XQOO-MESS			
 you wish to mark as 'Out Of Order': 			
an option			
a name preceded by a minus sign to remove 			
an option,			
 to switch to 			
an uparrow (that is '^') to quit,			
or '??' for more help.			
XQOO-MAIN			
 removed.  Start again or '^' to quit. 			
Do mean the 			
 No such 			
Remove all options previously selected? 			
OK, you may continue.			
menu options			
 selected yet			
You will place Out Of Order the following 			
Press RETURN to continue, or '^' to quit.			
Delete this set of options? (Y/N) 			
Should I mark these options/protocols out-of-order now? (Y/N) 			
 is being installed by KIDS			
Should I remove the option set 			
 is the list of options and/or protocols you just turned on.			
Mark the options in 			
 Out-Of Order now			
 you will mark all the options in the set 			
 Out Of Order.			
Return options in 			
 to general use			
 you will remove the Out-Of-Order message from the options in the set 			
There are currently no option sets definded in ^XTMP.			
 Please enter the number of the option set you want			
 Which option set do you want to work with? 1, 			
 Please enter the exact Out-Of-Order message			
 All options/protocols with this message are reclaimed into a set in ^XTMP			
 What do you want to name the recovered set? 			
 Enter any name of up to 20 characters			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################