source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0472.txt@ 846

Last change on this file since 846 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 10.1 KB
RevLine 
[604]1English French Notes Complete/Exclude
2OUTPUT To Terminals
3TOTAL Terminal I/O
4System Statistics
5Events/Sec
6SYS-CONFIG
7MSM-RTHIST SYSTEM CONFIG. PARMS PRINT
8Queue for what Date/Time:
9Buffer Cache Size:
10** Dispatch Parameters **
11Slice Size:
12Begin Burst Flush:
13RunQ Slice:
14Stop Burst Flush:
15Flush Panic Level:
16Flush Interval (sec.):
17STAP Size:
18Flush Quantity:
19STACK Size:
20I/O Flush level (fllevel):
21Dasd I/O Delay:
22Dasd Fsync:
23Term I/O Delay:
24Maximum Partitions:
25Maximum Concurrent Partitions:
26Sys. Config. Parms.
27RESPONSE TIME REPORT
28Average RT for Responses between 0 and 30 Sec.:
29Response Time Report
30GRAPH RESPONSE TIME REPORT
31* No Recorded Responses *
32Ave. Response Time Graph
33Select number of days to graph:
34Enter a number from 7 to
35, with no decimals
36Ave. %CPU & %DISK Utilization Graph
37Jobs
38* No Data Recorded *
39CPU/DISK UTILIZATION REPORT
40Ave.
41CPU/DISK Utilization Report
428987.2 - MSM PERFORMANCE DATA
43Enter Number of Days to keep
44HELP - HELP
45Purge Daily Entries File #8987.2
46Queue for what Date/Time?
47#8987.2 - MSM PERFORMANCE DATA
48XUCS- Vol. Group
49, Does NOT Exist!
50, is OUT OF SERVICE,
51C.M. Tasked RTHIST for Node -
52TRANSFER-STATUS
53Transfer Node -
54 Raw RTHIST Data
55XUCS-
56Capacity Management for MSM does NOT appear to be installed!
57 Report Type
58Some of the Dates you may choose from:
59Print/Display which Nodes:
60A = ALL Nodes are to be printed.
61U = USER Selected Nodes are to be printed.
62<cr> to QUIT selection.
63Slect Node to be printed:
64File #4 Entry Missing
65Select Site/Vol. Group:
66If you want to Print/Display ALL nodes then take the default.
67Otherwise make individual selection(s) from the following nodes.
68MPM X-SITE CPU,DISK,RT REPORT
69MPM Cross-site Performance Report for
70AM)
71PM)
72AM&PM)
73 Node CPU Disk Jobs
74MPM TABULAR SUMMARY
75 NO DATA between
76 MPM Summary for
77 CPU Usage %
78 Disk Usage %
79 Response Time Sec
80 Term InChar/S
81 Term OutChar/S
82 Global Gets/S
83 Disk Reads/S
84 Disk Writes/S
85 Read Cache %
86 Write Cache %
87 DDP Requests/S
88 RVG Requests/S
89 RVG Cache %
90 RTH Sessions
91No local CMP recipients in MSM RTHIST SITE file, no MPM Daily Summary
92MPM Morning Report for
93MPM Summary Report
94Select MPM Site
95GLOBAL ACCESS RANKING
96XUCS-RAW
97XUCS-ORDERED
98Global Access/Sec. Ranking Report
99MPM X-SITE RT REPORT
100MPM X-Site Response Time Report for
101MPM X-SITE SYSTEM STATS
102MPM X-Site Stats/Sec Report for
103Cmds
104Gets
105LRd
106LWt
107DRd
108DWt
109Terminated:
110Disuser:
111Date entered
112Mult Sign-on
113Fileman codes
114Type-ahead
115Office Phone
116Auto-Menu
117Voice Pager
118Has a E-SIG
119Write Med's
120Primary Menu:
121Secondary Menu(s)
122Keys Held
123Restrict?:
124OE/RR List:
125CPRS Access Tabs
126CPRS Parameter info (User Specific)
127 printed on
128DOCUMENT NAME
129NAME*
130No entry from the top.
131No slots in use to release.
132Resource Device
133-1^Device name in use
134-1^Resource name in use
135-1^Insufficient User Information On File. ssn,name,station name,station number,DUZ
136=========> FileMan Error
137 ACCESS to files:
138Would you like to Queue this Job
139XUA(
140Access to Files
141You do not have the correct access to run this option.
142Please contact your site manager for help.
143This could take some time to run depending on the number of
144files and users selected. It is definitely best to QUEUE the job.
145Select USER whose Access you want to copy:
146Select USER to receive Access:
147ACCESSIBLE FILE
148Select FILE to delete all access from:
149Are you sure you want to delete all access to the
150Answer YES to delete all access, or NO to leave things as they are.
151Delete all Access to the
152Select USER whose Access you want to remove:
153Are you sure you want to remove all of
154Delete all Access to Files for one user
1552///ACCESS DISABLED
156This answer is case sensitive.
157Select PACKAGE PREFIX
158Prefix must be 2 to 4 characters in length.
159Integrity program does not exist.
160ROUTINE INTEGRITY CHECKER
161Running
162XUHUIDA*
163XUHUIX*
164TASKED FIELD CHANGED EVENT (
165SET)
166KILL)
167Adding 'AXUHUI' new style cross-reference...
168Hui Project Top File Xref
169XUHUI FIELD CHANGE EVENT
170This new style cross-reference is on non-multiple fields that the Hui
171project want to monitor for a change in value (Patch XU*8*236). The
172following fields are being monitored in order:
173 9.2 (TERMINATION DATE)
174Finished adding 'AXUHUI' cross-reverence.
175Updating any Triggers for cross-reference 'AXUHUI'...
176Finished Updating any Trigers for cross-reference 'AXUHUI'.
177Adding 'AXUHUIKEY' new style cross-reference...
178HUI key xref
179This new style cross-reference is on the multiple: 'KEYS' so the Hui
180project can monitor the allocation/de-allocation of the 'PROVIDER'
181Finished adding 'AXUHUIKEY' new style cross-reference.
182Updating any triggers for new style cross-reference 'AXUHUIKEY'.
183Finished updating triggers for 'AXUHUIKEY' cross-reference.
184Post installed finished.
185XUHUI MFN
186VA KERNEL
187Event Change - Name or Termination Date or DOB or SSN or several of these.
188Orginal Name:
189 New Name:
190Old Termination Date:
191 New Termination Date:
192Old DOB:
193 New DOB:
194Old SSN:
195 New SSN:
196Hui Change Event (New Person)
197Provider Key:
198Allocated
199De-allocated
200Hui Change Event (Provider Key)
201XUHUI CHANGE EVENT
202G.XUHUI CHANGE EVENT
203You currently have the 'AFOF' X-ref that shows you are
204using the accessible file.
205If you need to re-run the conversion please kill the '^VA(200,
206)' X-ref first.
207Version 7 of the Kernel defined a new multiple-valued field
208in the New Person File called Accessible File. This conversion
209will store file access in this multiple in the following manner:
210Those Users who have a FileMan Access Code (DUZ(0)) which
211is not null, i.e., contains some character string,
212will have their access string matched to the protection
213currently on your files. For each match between the file
214and the user, the file will be listed in the user's
215Accessible File multiple as will the type of access
216NOTE: Files with no protection will NOT be assigned to any user.
217Would you like to run the conversion now
218To run this conversion, D ^XUINCON.
219If you are uncertain about your current file protection, it would
220be wiser to examine them before running this.
221If you are not on the CPU which holds the user file, it would
222be better to run this conversion on that CPU.
223If you are short for time, it would be wiser to run this later.
224Build table.
225Convert Users.
226Give access from DISV file.
227Recompile Template routines.
228Queue Menu Tree Rebuild
229 Move KERNEL site parameters.
230 Moving ALERTS from file 200 to file 8992 ...
231 Delete CPU field from alpha/beta test sites
232 Option Scheduling conversion.
233 Reindex Entry/Exit Actions in Option file.
234 Check and clean out XUFILE if not running FOF.
235 Load PARAM file
236XUEDIT CHARACTERISTICS
237XUNEW USER
238XUSER COMPUTER ACCOUNT
239XUREACT USER
240Removing trigger from XY CRT field(#5.2) of the TERMINAL TYPE FILE(#3.2)
241Removing data from the *OLD XY CRT field(#5) of the TERMINAL TYPE file(#3.2)
242Removing the *OLD XY CRT field(#5) from the TERMINAL TYPE file(#3.2)
243At A27, Calling XUINEACH
244Now to edit the Kernel Site Parameters.
245Please select a name for this site
246YOU MUST SELECT ONE
247Now to EDIT selectable terminal types for sign-on
248Checking the %ZOSV routine
249The %ZOSV routine isn't current.
250Check the second line of the routine, or your routine map table.
251You must first install KERNEL v7.1 before this version can be installed.
252Now to check protection on GLOBALS.
253If you get an ERROR, you need to add Write access to that global.
254Call to the VAX VMS EDT editor to process FileMan wordprocessing fields.
255Creates a temporary VMS file in the default directory with a name of
256'DIWE$'_$JOB_'.TMP'. This version will remove the two copies of the file
257that EDT leaves behind.
258VMSEDT - GTM
259Run Terminate events
260If you installed patch XU*8*290 you should answer Yes
261(If you installed XU*8*313 V3, this has already been done)
262A Yes answer will cause all users Terminated after a date you
263choose to have the XU USER TERMINATE protocol run on them.
264Date of patch XU*8*290 install
265Add national items to the XU USER TERMINATE option
266USR USER TERMINATE^GMRC TERMINATE CLEANUP^OR TERMINATE CLEANUP^PRCS TERMINATE^TIU TEMPLATE USER DELETE
267XU USER TERMINATE
268 not on system
269 already on menu.
270LOCAL_
271Now repointing entries with direct mappings.
272Now to re-map person class entries.
273Where do you want to start
274Terminated User (
275) has been automatically processed.
276Come back soon to finish up.
277That's the end.
278 has the following person class:
279This has been discontinued. Please select a new entry.
280NO ENTRY FROM TOP
281Clean up dangling 99 nodes in the OPTION File.
282Remove field 1000 from Option File
283Remove the ZZBUL trigger from the bulletin file.
284Beginning TaskMan's post-init conversion...
285End of TaskMan's post-init conversion.
286 move to new file.
287 startup moved.
2881Error - MFS parameter not defined for IFN
2891Error - IFN required
2901Error - IEN required
2911MFS PARAM MFE.4.1 null
2921MFS PARAM MFE.4.2 null
2931MFS PARAM MFE XREF not defined
2941not a valid IEN in MFE XUMF
2951MFP error in MFE XUMF
2961MFS PARAM no .01 in MFE
2971MFS PARAM MFE PKV ID null
2981MFS PARAM MFE PKV .01 is null
2991MFS PARAM MFE PKV .01 is invalid
3001MFS PARAM MFE FileDICN unsuccessful
3011FILE DIE error msg in MFE of XUMF
302IFN null
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.