source: internationalization/trunk/TranslationSpreadsheets/WV-DIALOG-0487.txt@ 1099

Last change on this file since 1099 was 604, checked in by George Lilly, 15 years ago

Internationalization

File size: 9.0 KB
Line 
1English French Notes Complete/Exclude
2 is not the same
3 **** VALUE IS GREATER THAN 255 CHARACTERS (SEE SUBNODES FOR DATA) ***
4%ZTER caused an error:
5%DSM-E-ET, Error occurred in %ZTER,
6GLOBAL SEARCH
7Global reference:
8Non-existing global.
9Bad Routine
10Bad Date/Time
11Bad Option
12No Description (%ZTLOAD)
13Restricted Device
14QUEUE INFORMATION MISSING - NOT QUEUED
15Queueing not allowed to device -- NOT QUEUED
16Sorry--that time is restricted!
17Output is never allowed from this option!
18No Description (REQ~%ZTLOAD)
19Inactive: Interrupted
20Taskman Waiting
21Logons Inhibited
22No Signons Allowed
23Required link to
24 is down.
25Waiting to balance the load.
26Main Loop
27Taskman Job Limit Reached
28Placed on JOB List
29Placed on C List
30Startup
31Interrupted While Running
32Startup Hang
33TM-DELAY
34Startup jobs
35Restart
36Setup
37The following required ^%ZOSF nodes are undefined:
38Taskman
39 is the wrong type in taskman site parameters.
40Inspected
41INVALID OUTPUT DEVICE
42Task's volume set not listed in index.
43Task's volume set not listed in file.
44Task's volume set can't accept tasks.
45Task's volume set has no link access.
46Task has no destination UCI listed.
47Task's UCI does not exist here.
48Task's entry routine does not exist here.
49Task's destination UCI failed check.
50Put On The IO List
51Your task #
52 rejected because:
53XQA*
54Too many hops
55Ready to Move
56 as task number
57BAD DESTINATION UCI
58Link Wait
59NO LINK ACCESS TO VOLUME SET
60Stopped while waiting for Link
61Link Error
62Caused by the manager.
63 is the wrong type of volume set for TaskMan.
64ZTLEFT=
65Taskman NOT Started
66Don't start TaskMan with the SHARE privilege
67access not authorized
68You lack the system privilege to start TaskMan.
69duplicate name
70The following error has prevented TaskMan from starting:
71TaskMan
72SUBMIT/NOPRINT/NOLOG/USER=TASKMAN/QUEUE=TM$
73NOTE THAT THE SYSTEM IS IN A 'SIGNOFF' STATE,
74WHICH PROBABLY EXPLAINS WHY TASKS ARE NOT RUNNING!!
75TASKMAN IS ALREADY RUNNING
76YESyes^NOno
77ARE YOU SURE YOU WANT TO RESTART
78TASKMAN? NO//
79Restarting...
80Taskman NOT Restared
81Answer YES to restart
82TaskMan.
83TaskMan must be running in each library uci on the system for tasks to run.
84One TaskMan per library uci should be enough for all but the busiest sites.
85The System Status option and the Monitor TaskMan option can help determine
86whether a TaskMan is running on this volume set.
87If you are still uncertain how to respond, answer NO and consult your
88documentation or your support ISC.
89TaskMan restarted!
90Checking Task Manager's Environment.
91Checking Taskman's globals...
92Checking the ^%ZOSF nodes required by Taskman...
93') is missing!
94All ^%ZOSF nodes required by Taskman are defined!
95Checking the links to the required volume sets...
96The link to volume set
97 is present!
98There are no volume sets whose links are required!
99Checks completed...Taskman's environment is okay!
100Here is the information that Taskman has:
101Operating System:
102Volume Set:
103Cpu-volume Pair:
104TaskMan Files UCI and Volume Set:
105Log Tasks?
106Default Task Priority:
107Task Partition Size:
108Submanager Retention Time:
109Min Submanager Count:
110Taskman Hang Between New Jobs:
111TaskMan running as a type:
112TaskMan is using VAX DSM enviroment:
113TaskMan is using '
114 for load balancing
115Logons Inhibited?:
116Taskman Job Limit:
117Max sign-ons:
118Current number of active jobs:
119 appears to be down!
120SUBMIT/NOPRINT/NOKEEP/QUEUE=TM$
121SUBMIT/NOPRINT/NOLOG/QUEUE=TM$
122ZTMGRSET Version
123HELLO! I exist to assist you in correctly initializing the current account.
124 I think it is
125. Should I continue anyway? N//
126Can't determine the OS type. Exiting ZTMGRSET.
127Need a Patch number to load.
128Patch number to load:
129I will now rename a group of routines specific to your operating system.
130Which MUMPS system should I install?
131NOT A VALID CHOICE
132Now to load routines common to all systems.
133Installing ^%Z editor
134Setting ^%ZIS('C')
135Want to rename the FileMan routines: No//
136- Use autostart to do ZTMB don't resave as STUSER.
137ZL @FROM ZS @TO
138Now, I will check your % globals.
139TASK'S^14.4^
140FAILED ACCESS ATTEMPTS LOG^3.05^^
141PROGRAMMER MODE LOG^3.07^^
142MGR_SUB_
143NO-OPTION
144TaskMan now in 'WAIT STATE'
145Are you sure you want to stop TaskMan? NO//
146Answer YES to shut down all Task Managers on current the volume set.
147TaskMan NOT shut down.
148Shutting down TaskMan.
149SMAN(NODE)
150Should active submanagers shut down after finishing their current tasks? NO//
151YESyesNOno
152Please answer YES or NO.
153SSUB(NODE)
154Okay!
155LAST UPDATED
156Live :
157Checking Taskman.
158Current $H=
159RUN NODE=
160Taskman is
161late by
162 shutting down
163 not running.
164Checking the Status List:
165 Node weight status
166The Status List is
167Checking the Schedule List:
168Taskman has
169 of them
170 First task is
171 seconds late.
172Checking the IO Lists:
173 Last TM scan:
174Last Dev:
175There are no tasks waiting for devices.
176 is not available,
177 is allocated,
178 is AVAILABLE,
179one task
180Checking the Job List:
181are no tasks
182 waiting for
183Not responding
184Out Of Service
185Checking the Task List:
186 currently running.
187Sub-Managers told to Wait.
188On node
189are no
190 free Sub-Manager(s).
191BWait
192SUB-MANAGERS ARE NOT STARTING.
193Enter monitor action: UPDATE//
194Mode set to
195Enter <RETURN> to update the monitor screen.
196Enter ^ to exit the monitor.
197Enter E to inspect the TaskMan Error file.
198Enter P to see taskman parameters.
199Enter R to see busy Resource slots.
200Enter S to see a system status listing.
201Enter ? to see this message.
202Enter ?? to inspect the tasks in the monitor's lists.
203In the wrong account.
204Resource
205Slot:
206This will move the complete text of the routines selected to
207the MGR account of the system being moved to.
208If you send a large number of routines you may run out of disk space
209on the target system.
210 send what routines!
211You're in
212Then...
213Starting to send!
214as task #
215in UCI:
216To which Volume Set (2-7 letters or * for all) to send routines?
217THIS IS THE SAME SYSTEM!!
218Auto-load or Manual: Manual//
219Enter UCI to unload into:
220>>ROUTINES WILL NOW BE SENT TO
221 AS TASK #
222 accessed by uci,volume:
223REMEMBER YOU MUST LOAD THE ROUTINES IN MANUALLY AT THE OTHER CPU
224WITH 'D IN^%ZTMOVE'
225F I=1:1 S R=$O(^UTILITY($J,R)) Q:R'?1AP.ANP ZL @R W $J(R,10) S ^[MGR,SYSM]%ZTSK(ZTSK,I,0)=R F J=1:1 S T=$T(+J) Q:T=
226 transfered from
227>>ROUTINES WILL NOW BE SENT TO THIS MACHINE AS TASK #
228ZTMOVE of routines to
229CANNOT SEND TO '
230Error exit
231Delete Task After Loading?
232No such task number exists.
233Not a 'ZTMOVE' task!
234READY TO BE LOADED INTO '
235F J=1:1:N ZR S R=^%ZTSK(ZTSK,J,0) X ZTL ZS @R
236ZR X ZTL ZS @R
237D ERROR^%ZTMS HALT
238Sub
239$ETRP ZTMS$
240 stopped because of an error
241Stopped because of an error
242Caused by the submanager while trapping an error.
243an unknown task.
244Caused by the submanager.
245Caused by the submanager while preparing
246Caused by submanager after
247Caused by
248Stopped by User
249No Lock C
250No Lock JOBQ
251No Lock IO
252IO TIME
253No routine at destination
254rescheduled for busy device
255BTask
256Started Running
2571 General error
258Job asked to stop
259No Lock
260Discarded Because Incomplete
261Got
262PRINTS FIRST LINES
263(A)lpha, (D)ate ,(P)atched, OR (S)ize ORDER: A//
264Include line 2?
265FIRST LINES PRINT
266 FIRST LINE LIST:
267 SIZE RANKING:
268Enter Return to continue
269 REVERSE DATE ORDER:
270 Patched routines
271Routine Print:
272Want to start each routine on a new page: Yes//
273Enter Yes to start each routine on a new page.
274No for the old way.
275Want line numbers: No//
276Enter Yes to have line numbers, O for offset numbers, No for no line numbers.
277YyNnOo
278NO routines selected.
279ROUTINE LIST
280Display Patches for Selected Routines
281No routines were selected.
282Installed Patch Listing
283Processing routines...
284Total Patches =
285 Total Routines =
286Enter RETURN to
287continue or '^' to exit:
288Installed Patches for Selected Routines
289Patch #
290ROUTINE DELETE
291 routines to DELETE, OK: NO//
292List of routines to DELETE
293** TROUBLE ** - ** CALL IRM NOW! **
294RECORDING THAT AN ERROR OCCURRED ---
295Sorry 'bout that
296--Interrupt Acknowledged
297NOPEN>^XUS
298RECORDING THAT AN ERROR OCCURED ---
299Waiting
300--Interupt Acknowledged
301This routine will rename the correct routine to ZU for you.
302Don't know what to do.
303#################### #################### ####################
304#################### #################### ####################
305#################### #################### ####################
306#################### #################### ####################
307#################### #################### ####################
Note: See TracBrowser for help on using the repository browser.