Changeset 1572 for qrda

Timestamp:

Oct 14, 2012, 4:06:20 PM (12 years ago)

Author:

Sam Habiel

Message:

Updated routines with changes for patch 1 and 5. Patch 5 fixes several bugs:
Vitals date range now includes today's date.
Empty lists are now created in advance for Outpatient Measures.
Inverse date display for visit was incorrect. That is fixed.
Outpatient Quality Measure Set in Parameters is now used; before it was ignored.
In C0QUPDT, (all previous are in C0QMU12), the variable C0QNALT is newed. This variable is a flag to indicate whether a measure uses the reminders package or uses the quality measures package for a patient list. Previously, if not newed it adversely affects subsequenet processing of lists, as the counts of the patients depends on the value of the flag. For example, a measurement set that mixes quality measures with performance measures will calculate wrong counts for the quality measures.

Patch 1 adds support for real-data MU ERx Measure based on data from the eRx vendor.

Location:

qrda/C0Q/trunk/p

Files:

• C0QMU12.m (modified) (6 diffs)
• C0QUPDT.m (modified) (4 diffs)

qrda/C0Q/trunk/p/C0QMU12.m

@@ -1 @@
-C0QMU12 ;JJOH/ZAG/GPL - Patient Reminder List ; 7/31/12 12:34pm
-        ;;1.0;C0Q;;May 21, 2012;Build 63
+C0QMU12 ;JJOH/ZAG/GPL - Patient Reminder List ; 10/10/12 11:28am
+        ;;1.0;QUALITY MEASURES;**1**;May 21, 2012;Build 32
         ;
         ;2011 Zach Gonzales<zach@linux.com> - Licensed under the terms of the GNU
@@ -78 +78 @@
         K C0QLIST
         S C0QLIST(ZYR_"HasDemographics")=""
-        S C0QLIST(ZYR_"Patient")=""
+        S C0QLIST(ZYR_"Patient")="" ; VEN/SMH - Is this needed? Not used in EP.
         S C0QLIST(ZYR_"HasProblem")=""
         S C0QLIST(ZYR_"HasAllergy")=""
         S C0QLIST(ZYR_"HasMed")=""
+        S C0QLIST(ZYR_"HasERX")="" ; VEN/SMH C0Q*1*5
+        S C0QLIST(ZYR_"HasMedRecon")="" ; VEN/SMH C0Q*1*5
         S C0QLIST(ZYR_"HasVitalSigns")=""
         S C0QLIST(ZYR_"HasMedOrders")=""
@@ -224 +226 @@
         D DT^DILF(,"JULY 3,2011",.C0QSDT) ; START DATE
         D DT^DILF(,"T",.C0QEDT) ; END DATE TODAY
+        S C0QEDT=C0QEDT+.999999 ; Move to the end of the day! VEN/SMH C0Q*1*5
         D VITALS^ORQQVI(.VITRSLT,DFN,C0QSDT,C0QEDT) ; CALL FAST VITALS
         I $D(VITRSLT) D  ;ZWR VITRSLT B  ;
@@ -347 +350 @@
         S ZI="" ; BEGIN AT LATEST DATE FOR THIS LOC IN VISIT FILE
         F  S ZI=$O(^AUPNVSIT("AHL",ULOC,ZI)) Q:(ZI="")!(ZI>IDTE)  D  ; FOR EACH DATE
-        . W !,$$FMTE^XLFDT(9999999-ZI) ;B  ;
+        . N C0QDATE S C0QDATE=9999999-$P(ZI,".")_"."_$P(ZI,".",2) ; VEN/SMH *5
+        . W !,$$FMTE^XLFDT(C0QDATE) ; VEN/SMH *5
         . I ZI="" Q  ;
         . N ZJ S ZJ=""
@@ -389 +393 @@
         S DFN=""
         S ZYR=ZYR_"EP-"
+        D INITCLST ; VEN/SMH - Initialize Empty Lists just in case we don't have
+                   ; any. C0Q*1*5
         F  S DFN=$O(C0QLIST(ZYR_"ALL-PATIENTS",DFN)) Q:DFN=""  D  ; EACH PATIENT
         . D DEMO^C0QMU122
@@ -398 +404 @@
         . D VITALS
         D FILE ; FILE THE PATIENT LISTS
-        N C0QCIEN
-        S ZI=""
+        ; 
+        ; Now process eRx MU measures for these patients
+        ; Check for eRx template and code first; if they exist, run the code
+        I $D(^C0PX("B","GETMEDS6")),$L($T(SOAP^C0PWS2)) DO
+        . N C0QDEBUG S C0QDEBUG=1 ; This causes the code to print out data;
+        . D EN^C0QMUERX($$PATLN^C0QMU12(ZYR_"HasERX")) ; Pass the eRx patient list
+        ;
+        N ZI S ZI=""
         F  S ZI=$O(C0QPARM(ZI)) Q:ZI=""  D  ;
-        . S C0QCIEN=C0QPARM(ZI,"EPMeasurementSet") ; ien of measurement set
-        . D UPDATE^C0QUPDT(.G,C0QCIEN) ; UPDATE THE MU MEASUREMENT SET
+        . N C0QDEBUG S C0QDEBUG=1 ; This causes the code to print out data;
+        . D UPDATE^C0QUPDT(.G,C0QPARM(ZI,"EPMeasurementSet")) ; UPDATE THE MU MEASUREMENT SET
+        . ; VEN/SMH -- Quality Set missing for Outpatient -- adding
+        . D UPDATE^C0QUPDT(.G,C0QPARM(ZI,"EPQualitySet")) ; C0Q*1*5
         Q
         ;

qrda/C0Q/trunk/p/C0QUPDT.m

@@ -1 @@
-C0QUPDT ; GPL - Quality Reporting List Update Routines ; 5/30/12 3:47pm
-        ;;1.0;C0Q;;May 21, 2012;Build 44
+C0QUPDT ; GPL - Quality Reporting List Update Routines ; 10/10/12 11:36am
+        ;;1.0;C0Q;**1**;May 21, 2012;Build 32
         ;Copyright 2009 George Lilly.  Licensed under the terms of the GNU
         ;General Public License See attached copy of the License.
@@ -48 +48 @@
         . ; 
         . ; Special processing for eRx measure.
-        . I $P(C0QM(ZII),U,2)="MU EP ERX" D ERXCOUNT(MSET,ZII) QUIT
+        . I $$GET1^DIQ(1130580001.101,+C0QM(ZII)_",",4,"I")="E" D ERXCOUNT(MSET,ZII) Q
         . ;
         . ; Otherwise, we go on
-        . N C0QNL,C0QDL,C0QFLTN,C0QFLTD
+        . N C0QNL,C0QDL,C0QFLTN,C0QFLTD,C0QNALT ; VEN/SMH - line changed in *5 
         . S C0QFLTN=$P(C0QM(ZII),U,3) ;IEN OF NUMERATOR FILTER LIST
         . S C0QFLTD=$P(C0QM(ZII),U,4) ; IEN OF DENOMINATOR FILTER LIST
@@ -204 +204 @@
         K ZERR
         D CLEAN^DILF
-        N % S %=$NA(C0QFDA) F  S %=$Q(@%) Q:%=""  W %_"="_@%,! ; smh instead of zwrite
+        D ZWRITE^C0QUTIL("C0QFDA")
         D UPDATE^DIE("","C0QFDA","","ZERR")
         I $D(ZERR) S ZZERR=ZZERR ; ZZERR DOESN'T EXIST, INVOKE THE ERROR TRAP IF TASKED
@@ -213 +213 @@
         Q
         ;
-ERXCOUNT(MSETIEN,MIEN) ; Private Proc; Get eRx and file as Numerator, Denominator, and %
- ; Inputs:
- ; MSETIEN - Measurement Set IEN - By Value
- ; MIEN - Measurement IEN inside the Measurement Set - By Value
- ; No check is done to see if the caller is sending bad data. Measurement must be
- ; in a subfile under Measurement Set.
- ;
- ; Example of Data we go through in the C0Q Parameter File, so the code below
- ; will make sense.
- ; ^C0Q(401,"AMMS",2,1)=""
- ; ^C0Q(401,"AMMS",2,2)=""
- ; ^C0Q(401,"AQMS",6,2)=""
- ; ^C0Q(401,"B","INPATIENT",2)=""
- ; ^C0Q(401,"B","OUTPATIENT",1)=""
- ; ^C0Q(401,"MU","MU12",1)=""
- ; ^C0Q(401,"MU","MU12",2)=""
- ; ^C0Q(401,"MUTYP","MU12","EP",1)=""
- ; ^C0Q(401,"MUTYP","MU12","INP",2)=""
- ;
- ; Get Parameter year from the Parameters file.
- ; 1. Get parameter associated with this measurement set from AMMS x-ref (new in C0Q*1*1).
- N C0QPARAM
- N % S %="" F  S %=$O(^C0Q(401,"AMMS",MSETIEN,%)) Q:%=""  S C0QPARAM(%)=""
- ;
- ; 2. Find the year for each of those--store as value of node; IEN still subscript.
- N % S %="" F  S %=$O(C0QPARAM(%)) Q:%=""  S C0QPARAM(%)=$$GET1^DIQ(1130580001.401,%_",",.02)
- ;
- ; 3. Now make sure that this parameter that point to an Outpatient Parameters
- ; WARNING: CONFUSING CODE WRITTEN BY ME AHEAD
- ; The % loop will stop with a valid value if found; % is used in the lines immediately below
- N % S %="" F  S %=$O(C0QPARAM(%)) Q:%=""  Q:$D(^C0Q(401,"MUTYP",C0QPARAM(%),"EP",%))
- ;
- ; 4. If % has a valid IEN (there can be multiple, we take the first), then off we go.
- ; Otherwise, if it is back to "", we quit.
- N MUYEAR
- IF '% W "No suitable parameter found. Cannot determine Measurement Year.",! QUIT
- ELSE  S MUYEAR=C0QPARAM(%)
- ; 
- ; Now, based on the MU year, construct the patient list name that has the eRx data.
- N LISTNAME S LISTNAME=MUYEAR_"-"_"EP"_"-"_"HasERX"
- ;
- ; Call the API in C0QMUERX to get the counts already calculated
- ; Data is returned NUM/DEN
- N COUNTS S COUNTS=$$COUNT^C0QMUERX($$PATLN^C0QMU12(LISTNAME))
- ;
- ; File the count
- N NUM S NUM=$P(COUNTS,"/") ; Numerator
- N DEN S DEN=$P(COUNTS,"/",2) ; Denominator
- ;
- ; Prepare FDA
- N C0QFDA,C0QERR
- S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",1.1)=NUM ; Numerator
- S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",2.1)=DEN ; Denominator
- S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",3)=$S(DEN=0:0,1:$J(100*NUM/DEN,0,0)) ; Percentage; avoid dividing by zero!
- ;
- ; File FDA using Filer not updater (editing existing entry only)
- D FILE^DIE("ET",$NAME(C0QFDA),$NAME(C0QERR)) ; Flags: External, Transaction
- ;
- ; If error, print it out
- I $D(C0QERR) DO
- . W "Error filing data",!
- . N % S %=$NAME(C0QERR) F  S %=$Q(@%) Q:%=""  W %_": "_@%,!
- ;
- QUIT
+ERXCOUNT(MSETIEN,MIEN)  ; Private Proc; Get eRx and file as Numerator, Denominator, and %
+        ; Inputs:
+        ; MSETIEN - Measurement Set IEN - By Value
+        ; MIEN - Measurement IEN inside the Measurement Set - By Value
+        ; 
+        ; Optional Symtab input: C0QDEBUG to print out debug messages to STDOUT.
+        ; ZEXCEPT: C0QDEBUG ; For Dr. Ivey's parser.
+        ;
+        ; No check is done to see if the caller is sending bad data. Measurement must be
+        ; in a subfile under Measurement Set.
+        ;
+        W:$G(C0QDEBUG) "Processing E-Prescribing Counts",!
+        ; Example of Data we go through in the C0Q Parameter File, so the code below
+        ; will make sense.
+        ; ^C0Q(401,"AMMS",2,1)=""
+        ; ^C0Q(401,"AMMS",2,2)=""
+        ; ^C0Q(401,"AQMS",6,2)=""
+        ; ^C0Q(401,"B","INPATIENT",2)=""
+        ; ^C0Q(401,"B","OUTPATIENT",1)=""
+        ; ^C0Q(401,"MU","MU12",1)=""
+        ; ^C0Q(401,"MU","MU12",2)=""
+        ; ^C0Q(401,"MUTYP","MU12","EP",1)=""
+        ; ^C0Q(401,"MUTYP","MU12","INP",2)=""
+        ;
+        ; Get Parameter year from the Parameters file.
+        ; 1. Get parameter associated with this measurement set from AMMS x-ref (new in C0Q*1*1).
+        N C0QPARAM
+        N % S %="" F  S %=$O(^C0Q(401,"AMMS",MSETIEN,%)) Q:%=""  S C0QPARAM(%)=""
+        ;
+        ; 2. Find the year for each of those--store as value of node; IEN still subscript.
+        N % S %="" F  S %=$O(C0QPARAM(%)) Q:%=""  S C0QPARAM(%)=$$GET1^DIQ(1130580001.401,%_",",.02)
+        ;
+        ; 3. Now make sure that this parameter that point to an Outpatient Parameters
+        ; WARNING: CONFUSING CODE WRITTEN BY ME AHEAD
+        ; The % loop will stop with a valid value if found; % is used in the lines immediately below
+        N % S %="" F  S %=$O(C0QPARAM(%)) Q:%=""  Q:$D(^C0Q(401,"MUTYP",C0QPARAM(%),"EP",%))
+        ;
+        ; 4. If % has a valid IEN (there can be multiple, we take the first), then off we go.
+        ; Otherwise, if it is back to "", we quit.
+        N MUYEAR
+        IF '% W "No suitable parameter found. Cannot determine Measurement Year.",! QUIT
+        ELSE  S MUYEAR=C0QPARAM(%)
+        ; 
+        ; Now, based on the MU year, construct the patient list name that has the eRx data.
+        N LISTNAME S LISTNAME=MUYEAR_"-"_"EP"_"-"_"HasERX"
+        ;
+        ; Call the API in C0QMUERX to get the counts already calculated
+        ; Data is returned NUM/DEN
+        N COUNTS S COUNTS=$$COUNT^C0QMUERX($$PATLN^C0QMU12(LISTNAME))
+        ;
+        ; File the count
+        N NUM S NUM=$P(COUNTS,"/") ; Numerator
+        N DEN S DEN=$P(COUNTS,"/",2) ; Denominator
+        ;
+        ; Prepare FDA
+        N C0QFDA,C0QERR
+        S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",1.1)=NUM ; Numerator
+        S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",2.1)=DEN ; Denominator
+        S C0QFDA($$C0QMMFN(),MIEN_","_MSETIEN_",",3)=$S(DEN=0:0,1:$J(100*NUM/DEN,0,0)) ; Percentage; avoid dividing by zero!
+        ;
+        ; File FDA using Filer not updater (editing existing entry only)
+        D FILE^DIE("ET",$NAME(C0QFDA),$NAME(C0QERR)) ; Flags: External, Transaction
+        ;
+        ; If error, print it out
+        I $D(C0QERR) DO
+        . W "Error filing data",!
+        . N % S %=$NAME(C0QERR) F  S %=$Q(@%) Q:%=""  W %_": "_@%,!
+        ;
+        QUIT