English	French	Notes	Complete/Exclude
Do you want to delete			
FOR_FMT^1^1			
You must specify some fields into which to import data.			
FLD_DLM			
Enter the name of the host file that contains the data to be imported.			
These are the files in the 			
You must choose a file before you can go to the Field Selection page.			
FLD_DEL			
You have specified a fixed length format for imported data.			
However, you have not entered field lengths for fields you have chosen.			
So, you must either delete all the fields entered so far			
or change the format to one that is not fixed length.			
Do you want to store the selected fields in an Import Template			
Do you want to proceed with the import			
If you answer 'YES', the import will occur now.			
If you answer 'NO', you will need to respecify the import criteria.			
Okay, you can do the import later.			
Following error messages were generated when import failed.			
Enter name for your import template.  It should be 3-30 characters and it should not start with a punctuation character			
Name of Import Template:  			
  Are you adding '			
' as a new Import Template			
An error occurred during the filing of the import template.			
No import template will be created.			
Import Template 			
 already exists.			
Existing Import Template 			
 has been deleted.			
Choose another template name.			
Do you want to replace the existing template with a new one			
If you answer 'YES', the existing template will be deleted.			
This routine will report any sort templates that have been corrupted due to			
a bug in FM21 that has been repaired by patch DI*21*9.			
If any templates are reported here, you can repair them by editing the template,			
without changing any of the sort fields.			
If none show on the report, it means that none of the templates on your system			
needed to be edited.			
Report corrupted sort templates			
Searching Sort Template file...please wait			
Report of templates that need to be repaired			
No. 			
END_IXVALUES			
BEGIN_IXVALUES			
BEGIN_IENs			
END_IENs			
IXCNT=			
BEGIN_IDVALUES			
END_IDVALUES			
BEGIN_WIDVALUES			
END_WIDVALUES			
WORD-PROCESSING			
IENs			
No editing allowed.			
You cannot save changes at this level.			
To close the current page, press <PF1>C.			
This is a required 			
Another entry already exists with this key value.			
DA,DDS1ND)			
No jumping allowed.			
No exit allowed, since navigation for the block is disabled.			
 not found.			
 is uneditable.			
DIR(			
Closing page...			
Since navigation for the block is disabled, that key sequence is disabled.			
Filing form			
DA,DDSND)			
DA,DDSOND)			
Please wait.  Loading all pages ...			
Verifying ...			
Subfile: 			
Record: 			
  Key Field(s): 			
Press RETURN to continue: 			
DONE!			
CLONE FORM FROM			
Select FORM to clone: 			
There are no blocks on this form.			
  BLOCKS USED ON FORM 			
  Entry Number   Block Name			
The new form and blocks must be given unique names.			
Give the new form and blocks the same names as the original,			
but a different namespace			
   Answer 'YES' if the original form and blocks are namespaced, and you want			
   the new forms and blocks to have a different namespace.			
Original namespace: 			
   Enter the namespace of the original form and blocks			
     New namespace: 			
   Enter the namespace of the new form and blocks			
Enter names for the new form and blocks.			
Original form name: 			
     New form name: 			
  Enter the name of the new form.			
  Invalid name.			
  Form with this name already exists.			
Original block name: 			
     New block name: 			
  Block with this name already exists.			
Creating new blocks ...			
Attempt to create block 			
Creating new form ...			
Attempt to create form 			
Repointing to new blocks ...			
Reindexing new form ...			
Ready to clone form			
  Enter 'Y' to clone form.  Enter 'N' to exit.			
Close     Refresh			
Close			
;n:NEXT PAGE			
Exit     			
Save     			
Next Page     			
COMMAND:			
Enter a command or '^' followed by a caption to jump to a specific field.			
DDSE(			
FO(			
There are no unused blocks associated with this file.			
PURGE UNUSED BLOCKS FROM			
  Enter 'Y' to delete, 'N' to keep.			
Delete (Y/N)? 			
Deleting block 			
Delete all unused blocks without prompting (Y/N)? 			
  Enter 'Y' to delete unused blocks from the BLOCK file			
    without confirmation.			
  Enter 'N' to confirm each delete.			
Continue (Y/N)? 			
  Enter 'Y' to delete form.  Enter 'N' to exit.			
  UNUSED BLOCKS			
 ASSOCIATED WITH FILE 			
Deleting the FORMS...			
Deleting the BLOCKS...			
Block 			
was deleted from the Block file.			
I'm deleting pointers to that block from			
Form 			
The above form(s) need to be redesigned.			
Deleting form 			
DELETE FORM FROM			
Select FORM to delete: 			
Delete all deletable blocks used on form 			
from the BLOCK file (Y/N)? 			
  Enter 'Y' to delete blocks used on form			
 from the BLOCK file.			
    (Only blocks not used on other forms can be deleted.)			
  Enter 'N' to delete the form but not the blocks.			
Delete blocks without prompting (Y/N)? 			
  Enter 'Y' to delete blocks from the BLOCK file			
Used on			
Other Forms?   Deletable?			
PRIMARY FILE			
DDO,bk#,pg#			
with caption or unique name 			
SCREENMAN OPTION^1.01			
Report of Form 			
DDSFORM(0)			
PRIMARY FILE: 			
READ ACCESS: 			
DATE CREATED: 			
WRITE ACCESS: 			
DATE LAST USED: 			
CREATOR: 			
RECORD SELECTION PAGE: 			
PRE ACTION:			
POST ACTION:			
POST SAVE:			
DATA VALIDATION:			
FORM LISTING - 			
FILE: 			
Start each page of the form on a new page			
Page    Page			
Number  Properties			
HEADER BLOCK:			
PAGE COORDINATE:			
IS THIS A POP UP PAGE?:			
LOWER RIGHT COORDINATE:			
NEXT PAGE:			
PREVIOUS PAGE:			
PARENT FIELD:			
Block  Block			
Order  Properties (Form File)			
TYPE OF BLOCK:			
BLOCK COORDINATE:			
POINTER LINK:			
REPLICATION:			
INDEX:			
INITIAL POSITION:			
DISALLOW LAYGO			
FIELD FOR SELECTION:			
Block Properties (Block File)			
Header Block Properties			
DATA DICTIONARY NUMBER:			
DISABLE NAVIGATION:			
Field  Field			
Order  Properties			
FIELD TYPE:			
CAPTION:			
EXECUTABLE CAPTION:			
DISPLAY GROUP:			
UNIQUE NAME:			
FIELD:			
COMPUTED EXPRESSION:			
READ TYPE:			
PARAMETERS:			
QUALIFIERS:			
HELP:			
INPUT TRANSFORM:			
SAVE CODE:			
SCREEN:			
CAPTION COORDINATE:			
DATA COORDINATE:			
DATA LENGTH:			
SUPPRESS COLON:			
DEFAULT:			
EXECUTABLE DEFAULT:			
REQUIRED:			
DISABLE EDITING:			
RIGHT JUSTIFY:			
DISALLOW LAYGO:			
SUB PAGE LINK:			
BRANCHING LOGIC:			
POST ACTION ON CHANGE:			
READ TYPE			
form-only field in the BLOCK			
IX(			
  NOTE:  You must Save or Discard all edits to the			
         previous record before editing the next record.			
Save, Discard, or Return (S/D/R)			
Enter 'S' to save or 'D' to discard.			
Enter 'R' or '^' to return to previous record.			
RUN FORM FROM			
Enter number of first page: 			
YyNn^			
Yy			
'^' TO STOP: 			
DA,ND)			
DD or caption-only			
FIELD multiple of the BLOCK			
DD, computed, or caption-only			
WARNING: This field is uneditable.			
         Any changes made in the editor will not be saved.			
Press RETURN to enter editor:			
Press 'RETURN' to edit this word processing field.			
Compiling 			
Compiling all forms ...			
Deleting compiled form data ...			
Ffile#			
DDSRNAV(			
DDSN(			
DATA DICTIONARY UTILITY OPTION^1.01			
Check the Data Dictionary.			
Remove erroneous nodes			
This routine will try to fix certain nodes that are erroneous and may set some nodes to a file referenced by the selected file.			
Say 'NO' here to leave the DD untouched.  It will only flag the ones it finds erroneous.			
Checking file # 			
You don't have DD access to this file.  No fixing will be done on this file.			
is missing zero node of DD.			
Checking 'ID' nodes for 'Q'.			
Checking 'IX' nodes.			
Checking 'PT' nodes.			
has duplicate 'NM' nodes.			
'ID' node for field 			
Cross-reference logic is missing for 			
is not a pointer.			
is not a pointer to file 			
Duplicate 			
 node was deleted.			
is missing.			
) was killed.			
Checking FIELDs			
 is missing its zero node.  Nothing done.			
doesn't have the correct protection for a field with executable code.			
 was set.			
points to missing file: 			
is missing its 'PT' node in the pointed-to-file.			
missing subfile: 			
Bad 'UP' pointer in subfile #			
Checking subfile # 			
Returning to 			
triggers missing file 			
triggers missing field 			
 in file 			
 5 node is missing.			
FILE (#.01) for 			
NAME for 			
ROOT FILE for 			
ORDER NUMBER of Cross-Reference Value #			
FILE for 			
AC index (In: DDUCFI = file; DDUCFIX = flag to fix)			
 set to 			
ROOT TYPE for 			
 set to 'INDEX FILE'.			
ORDER NUMBER for Cross-Reference Value #			
 set to '			
 was killed.			
 was set			
Checking Indexes.			
 Nothing done.			
FILE does not equal ROOT FILE in 			
. Nothing done.			
File #			
 referenced in 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
