English	French	Notes	Complete/Exclude
MSGID = 			
-1^Unable to create batch HL7 message			
-1^Did not pass valid pointer to PATIENT file			
-1^Did not pass variables required to interact with the HL7 package			
-1^Unable to create MSH segment for a batch transmission			
-1^ message ID required for filer function			
-1^ patient's DFN required for filer function			
-1^ clerk required for filer function			
-1^ option required for filer function			
-1^ sending application required for filer function			
-1^Error filing entry in ^VAT(39.4 - 			
-1^ message ID required for update function			
-1^ status required for update function			
-1^ reason required for update function			
-1^ status needs to be one			
-1^Message ID not found in file			
-1^message control ID required for delete function			
-1^Message ID 			
 not deleted from 39.4			
Service connected eligibility NOT verified			
Card will be queued as Non service connected (blue)			
Embosser files not correctly set up...contact your site manager			
Data card NOT queued			
Number of cards to print (1-8):  1//			
Enter the number of cards you wish to print (1-8)			
Service connected or NSC status not entered...cannot print card			
Do you still wish to emboss a patient data card			
Enter 'Y'es to emboss a card, otherwise, 'N'o.			
EMBOSS (OLD) DATA CARD			
  Enter YES to print patient data card for this patient, otherwise respond NO			
Print or Hold 			
Enter 'P'rint or 'H'old			
Data Card Placed in Hold to be Printed Later!			
DGLINE(			
Print Data Card			
Queue to print 			
 cards on device: 			
Data card queued			
Edit Data			
Enter 'Y'es to edit the above date, otherwise 'N'o			
Choose a line (1-9):  			
Enter the numbers of the lines to edit separated by commas (ex. 1,2,3)			
WARNING:  You must enter the entire line(s) again			
Print Pending Cards for which Card Type:  			
There are no 			
 cards on hold to be printed			
Print Data Cards on Hold			
Free Text line 			
You may enter a free text comment for this line on the Patient card.			
Text must be less than 27 characters.			
Lower case characters and the following symbols: (#),(@),(			
) are not allowed.			
ELIGIBILITY CODE			
CLAIM NUMBER			
ADDRESS DATA			
DG EMBOSSER1			
DG EMBOSSER			
>>> Creating entry for P-VIC-OTHER in TERMINAL TYPE file (#3.2)			
    Existing entry found and updated			
    New entry created 			
    ** Unable to create entry for P-VIC-OTHER			
    ** Entry must be created manually			
>>> Creating entry for VIC CARD in DEVICE file (#3.5)			
VIC CARD			
    ** Unable to create entry for VIC CARD			
    ** Time out expired			
    Location entered as null, this will need manual update			
** $I is a critical element and it has been entered as null			
   This will need to manually updated for VIC to function properly			
>>> Beginning environment check			
  Checking for installation of PIMS version 5.3 ...			
    *** Required element missing ***			
    Installation of Veteran ID Card requires that PIMS version			
    5.3 be installed - you have version 			
    Installation will be aborted at end of environment check.			
  Checking for installation of HL7 version 1.6 ...			
    1.6 be installed - you have version 			
  Checking for installation of patch XU*8.0*44 ...			
XU*8.0*44			
    XU*8.0*44 be installed.  Install will be aborted at end of			
    environment check.			
  Checking for installation of patch HL*1.6*8 ...			
HL*1.6*8			
    HL*1.6*8 be installed.  Install will be aborted at end of			
>>> Environment check completed			
*** Element(s) critical to installation of Veteran ID Card are missing			
*** Installation will be aborted			
Installation will proceed as planned			
>>> Updates entry DGQE VIC EVENTS in HL APPLICATION file (#771)			
DGQE VIC EVENTS			
    ** Entries for 'DGQE VIC EVENTS' in the HL APPLICATION			
       file (#771) can not be created			
    ** Entries must be manually entered			
     DGQE VIC EVENTS updated with site number			
>>> Updates entry 'VIC-LINK' in HL LOWER LEVEL PROTOCOL PARAMETER			
    file (#869.2) with device 'VIC CARD'			
    ** Entry for 'VIC CARD' in DEVICE file does not exist			
    ** The 'VIC CARD' device needs to exist before it can			
       be updated to the logical link.  These entries			
       will need to be built manually			
VIC-LINK			
    ** Entry for 'VIC-LINK' in the HL LOWER LEVEL PARAMETER			
       file (#869.2) is not found			
    ** Entries must be manually entered and updated with			
       'VIC CARD' device			
200.01///VIC CARD			
    Logical link 'VIC-LINK' updated with device 'VIC CARD'			
>>> Updates entry 'DGQE PHOTO CAPTURE' bulletin with VIC mail group			
    ** Entry for 'VIC' in MAIL GROUP file does not exist			
    ** The 'VIC' mail group needs to exist before it can			
       be updated to the bulletin file.  These entries			
    ** Entry for 'DGQE PHOTO CAPTURE' in the bulletin			
       file (#3.6) is not found			
    ** The entry must be manually entered and updated			
       'VIC' mail group			
    VIC mail group associated DGQE PHOTO CAPTURE bulletin			
>>> Updates VIC mail group with one member			
    ** Entry for 'VIC' mail group can not be found			
    ** The VIC mail group and members will need to be			
       entered manually			
    ** No member added to VIC mail group.			
    ** Members will need to be entered manually			
     VIC mail group updated with new member			
>>> Additional members should be added to the VIC Mail Group...			
     The members in this group would be those people			
     responsible for taking care of problems associated			
     with the VIC interface			
>>> Checks for version 2.2 in HL7 VERSION file (#771.5)			
    ** Version 2.2 exist in the HL7 version file (#771.5)			
    ** Entry for version 2.2 in the HL7 version file 			
       (#771.5) can not be created			
    ** Entry must be manually entered			
2///HEALTH LEVEL SEVEN			
     Version 2.2 added to file #771.5			
>>> Check for version 2.2 in entry A08 in file #779.001			
    ** Entry for 'A08' in HL7 EVENT TYPE CODE file does 			
       not exist			
    ** The 'A08' event type will need to exist before it			
       can be updated with version 2.2.  The A08 entry			
       will need to be built manually and updated			
    ** Version 2.2 already associated with A08 entry			
    Version 2.2 added to entry A08 			
>>> Check for version 2.2 in entry ACK in file #771.2			
    ** Entry for 'ACK' in HL7 MESSAGE TYPE file does 			
    ** The 'ACK' message type will need to exist before it			
    Version 2.2 added to entry ACK 			
  - Enter date to start search, the default is today			
  - Enter date to end search,can not be less than start date			
Number of days to scan in advance			
Enter number of days to scan in advance.			
Download all current Inpatients to the VIC card station 			
Enter yes to download data.			
DGQE-DFN			
Queue job: 			
Enter YES or NO to have job run in background			
Card(s) queued, task number = 			
 Inpatients down loaded to VIC work station			
Note: Each dot equals a ward			
DFN = 			
Inpatient data not downloaded.  Error - 			
DIVISION = 			
SELDIV = 			
Download Inpatients to VIC work station via HL7			
Download Clinics patients to the VIC card station: 			
Task job: 			
Enter YES/NO to determine whether job is tasked			
 Outpatients down loaded to VIC work station			
Note: Each Dot equals a clinic			
Clinic patients not downloaded.  Error - 			
CLINIC = 			
CLINDATE = 			
Download Outpatients to VIC work station via HL7			
Download Scheduled Admissions to the VIC card station 			
 Scheduled admissions down loaded to VIC work station			
Note: Each dot equals a day			
Results = 			
Scheduled admission data not downloaded. Error - 			
Scheduled admissions download to VIC work station via HL7			
Download VIC data			
  Enter YES to download patient demographic data to photo capture station			
Data not downloaded.  Error - 			
Data Download successfully to VIC			
Do you still wish to download data 			
Enter 'Y'es to download data, otherwise, 'N'o.			
Combinations.			
DG PATIENT SELECTION			
** No patient selected **			
Current patient: 			
Combination			
DGLP DEFAULT 			
Combinations			
Change View			
Next Screen			
Enter the number of the patient chart to be opened			
Enter the display number of the patient whose chart you wish to open			
or enter a patient name, SSN, or initial/last 4 combination.  To			
change the list of patients displayed on this screen, enter CV.  To			
have the new list automatically displayed when selecting a new patient,			
enter SV.  Enter FD to search by patient name or identifier.			
Press <return> to continue ...			
Team 			
Provider 			
Specialty 			
Ward 			
Clinic 			
Combinations:			
Combination List			
No patients found			
ORQPT SELECT PATIENT			
Appointment Date			
Source   Other			
 is not a valid selection.			
DG SENSITIVITY			
This patient died 			
Select CLINIC: 			
Enter the 			
 date for appointments to this clinic for which you wish to see the patients listed; indicate the date relative to TODAY, i.e. T+1 for tomorrow or T-2W for 2 weeks ago.			
Select PROVIDER: 			
Select TEAM: 			
P:Date of Appointment;			
(A)lphabetic or 			
Date of A(p)pointment? 			
Date of Appointment			
Alphabetic			
(A)lphabetic or Date of A(p)pointment or (S)ource  			
Enter the attribute you wish the list to sort by			
Saving patient list definition ... 			
CLINIC 			
Current List: 			
Primary Provider 			
, sorted by 			
Are you sure you want to save these list parameters as your default? 			
Enter YES if you wish to use these same parameters again the next time a patient list is created for you to select from, or NO to quit without saving.			
Removing your personal patient list definition ... 			
(NOTE: Service/Section default of 			
 not affected.)			
Parameter instance not found			
nothing to remove.			
Are you sure you want to remove your current list default view? 			
Enter YES if you wish to remove your current default patient list view, or NO to leave the current personal setting(s).			
>> A Clinic list cannot be sorted by room-bed assignment!			
   Please select a new sorting order:			
>> A Combination list cannot be sorted by room-bed assignment!			
Team			
 list cannot be sorted by clinic appointment date!			
RESTRICTED PATIENT RECORD ACCESSED			
The following sensitive patient record has been accessed:			
  Patient Name: 			
  Soc Sec Num : 			
  Option Used : 			
no type			
primary care			
DGLP DEFAULT CLINIC 			
Unable to determine DUZ.			
Alpha			
DGWD COMMON CLINIC			
 - Too many appointments found; please narrow search range.			
DGQQAP SEARCH RANGE START			
DGQQAP SEARCH RANGE STOP			
No user DUZ passed.			
No combination pointer passed.			
No source found....			
Ward:       			
Provider:   			
Team List:  			
Clinic:     			
Wd 			
Pr 			
Sp 			
Tm 			
Cl 			
No combination entry.			
Combination source entry error.			
No patients found.			
Select 1010 printer: 			
Not a printer			
Using closest printer 			
Is the patient currently being followed in a clinic for the same condition			
Enter 'Y' if the patient is being followed in clinic for condition for which			
registered, 'N' if not.			
There is still an open disposition--register aborted.			
Is the patient to be examined in the medical center today			
Enter 'Y' if the patient is to be examined today, 'N' if not.			
Registration login date/time: NOW// 			
You must enter a date that does not exist.			
User Time-out.  Required registration data could be missing.			
This registration has been deleted.			
You can only enter new registrations through this option.			
Time is required to register the patient.			
***PATIENT IS CURRENTLY AN INPATIENT***			
***PATIENT IS CURRENTLY A LODGER***			
Another user is editing, try later ...			
Enrollment/Eligibility Query sent ...			
REGISTRATION IN PROGRESS			
Data retrieval from LST site has been completed successfully			
Thank you for your patience.			
Data retrieval from LST site has not been successful.			
Please continue the Registration Process.			
PRINT 1010 - FROM REGISTRATION			
ROUTING SLIP			
1010 - FROM REGISTRATION			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
