English	French	Notes	Complete/Exclude
  in order to remove the index, FileMan must loop through a large number			
  of entries, and you would rather wait until a non-peak time to perform			
  deletion. Note, however, that FileMan will use the WHOLE KILL LOGIC to			
  remove the index, so the looping time may not be an issue.			
  Executing old kill logic ...			
Do you want to execute the old kill logic now			
  Enter 'YES' to execute the original kill logic now.			
  Up-arrow not allowed.			
  Building new index ...			
Do you want to build the index now			
  Enter 'YES' to loop through all entries in the file and build the index			
  fields being indexed, or if the file has a large number of entries, and			
  you would rather wait until a non-peak time to build the index on a			
  live system.			
  Executing new set logic ...			
Do you want to cross reference existing data now			
  Enter 'YES' to execute the new set logic now.			
Press the RETURN or ENTER key.			
Deleting cross-reference definition ...			
KWcd			
Executing kill logic ...			
Removing index ...			
Wcd			
Deleting index definition ...			
QWds			
Primary Key '			
' is already defined on this file.			
Selected index is not a Regular index.			
Selected index is not used for Lookup.			
Selected index has a Set Condition.			
Selected index has a Kill Condition.			
Selected index has a computed value.			
Selected index has a value with a transform.			
The sequence number 			
Sequence numbers must be consecutive numbers starting with 1.			
Uniqueness Index for Key '			
  WHOLE FILE (#			
Uniqueness Index: 			
Lookup Index(es): 			
File, Field: 			
Want to create a new Key for this file			
Are you sure you want to delete the Key			
The definition of the Uniqueness Index was modified.			
  Modifying fields in Key ...			
Checking key integrity ...			
  NO PROBLEMS			
 previously used by 			
the Key			
' Uniqueness Index (#			
Subf			
Choose V (Verify)/E (Edit)/D (Delete)/C (Create): 			
Enter 'V' to verify the integrity of a Key.			
      'E' to edit an existing Key			
      'D' to delete an existing Key			
      'C' to create a new Key.			
Do want to check the integrity of this key now			
Enter 'Y' to run the key integrity checker.			
  Creating new Key '			
  Modifying Uniqueness Index ...			
I'm going to create a new Uniqueness Index to support 			
  One moment please ...			
Enter a Name for the new Key			
A key already exists with this name.			
There are no Keys defined on 			
Keys defined on 			
;  Whole File (#			
Field(s):  			
, from File #			
Which Key do you wish to 			
KEY INTEGRITY CHECK			
 ** NO PROBLEMS **			
Duplicate Key 			
Missing Key Field(s):			
Unknown record name			
, Whole File #			
ENTRY #			
The Key fields and the fields in the Uniqueness Index don't match.			
;2:Make Key match Uniqueness Index (also selected on up-arrow)			
:Make Uniqueness Index match Key			
 (also selected on up-arrow)			
NOTE: 			
 has neither fields nor a Uniqueness Index defined.			
 and its Uniqueness Index have no fields defined.			
NOTE: All Keys must have a Uniqueness Index defined.			
All Keys must have a Uniqueness index defined.			
ERROR: The key is not unique and/or some records have key field values missing.			
The Key is invalid because it is not unique and/or some records have missing key field values.			
 ; COMPILED XREF FOR FILE #			
File Number missing or invalid			
File Number: 			
Routine name missing			
Compiling Cross-references (FILE#:			
DIKZ(			
 ; DRIVER FOR COMPILED XREFS FOR FILE #			
DI S DIKM1=0,DIKUM=0,DA(0)=			
DA K DA F DV=1:1 Q:'$D(DIKUP(DV))  S DA(DV)=DIKUP(DV)			
SET1 S (DA,DCNT)=0			
KILL S DIKILL=1,DIKZK=2			
SET S DISET=1,DIKZK=1 K DIKPUSH			
 ; DRIVER FOR COMPILED XREFS FOR FILE !			
SET 			
KIL1 			
DA(1)=DA,DA=0			
DA(0)			
 W X K Y			
Sun^Mon^Tues^Wednes^Thurs^Fri^Satur			
*** WARNING!!  VA FileMan version 			
 is currently loaded on this system.			
This Initialization will bring in VA FileMan version 			
, an earlier version!!			
Your defined operating system entry 			
 does not support the			
You may not initialize VA FileMan V21.			
Initialize VA FileMan now?  NO//			
Nn			
Answer YES to begin Initializing VA FileMan			
SITE NAME: 			
  ENTER THE NAME OF THIS INSTALLATION SITE			
SITE NUMBER: 			
  ENTER A NUMBER, CORRESPONDING TO YOUR INSTITUTION			
Now loading other FileMan files--please wait.			
TYPE OF MUMPS SYSTEM YOU ARE USING: 			
Set Operating System			
FILE SECURITY CODES^^^1			
Now loading MUMPS Operating System File			
MUMPS OPERATING SYSTEM^.7			
This file stores operating system-specific code.  Since the code to invoke			
some operating system utilities that FileMan uses varies among operating			
systems, code to perform these utilities is stored in and executed from			
this file.  During the FileMan INIT process an operating system is			
selected so that FileMan knows which entry to use from this file.			
Now loading DIALOG and LANGUAGE Files			
ONLY A PROGRAMMER CAN DELETE THIS FIELD!			
WARNING-- A COMPUTED FIELD USES THIS FIELD!			
CAN'T DELETE A FIELD THAT HAS A 'TRIGGER' POINTING TO IT!			
CAN'T DELETE IDENTIFIER!			
CALLED FROM ENTRY POINTS			
FOREIGN TEXT			
print template			
Are you adding...			
Col>			
Line>			
Screen>			
edit properties			
Field Order:			
NO DD UPDATE			
No data			
FILE-PRE			
ENTRY-PRE			
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]\			
DESCRIPTION:			
USAGE NOTE:			
OTHER NAME:			
AVAILABLE FOREIGN FORMATS			
DUP(			
Update screen: 			
INTERNAL(FILE)			
UP DATE THE DD			
VER SION #			
USER OVER RIDE DD			
MERGE OR OVER WRITE			
USER OVER RIDE DATA			
Environment Check Routine          :			
Pre-Init After User Commit Routine :			
Post-Initialization Routine        :			
COMPILED ROUTINE			
ARE YOU SURE YOU WANT TO DELETE THE ENTIRE FIELD?			
MULTIPLE?			
IS THIS A POP UP PAGE?			
NO LAYGO-ING TO THIS FILE!			
 and not already used			
VARIABLE-POINTER #			
ADDING A NEW ENTRY			
(Compiled as '			
(Not Compiled)			
Only programmers are allowed to edit the Set Condition.			
Only programmers are allowed to edit the Kill Condition.			
Only programmers are allowed to edit the Transform for Storage.			
This File number must equal the Root File number: 			
Only programmers are allowed to edit the Computed Code.			
Deletion not allowed.			
Deletions not allowed.			
(formerly compiled as '			
DISABLE NAVIGATION			
DDGF BLOCK EDIT 2			
INITIAL POSITION			
FIELD FOR SELECTION			
ASK 'OK'			
Are you adding Page 			
LOWER RIGHT COORDINATE			
PREVIOUS PAGE			
NEXT PAGE			
Word processing fields are always reachable.  To make the field uneditable, enter 'YES'.			
Are you adding 			
A response is required.  Enter either YES or NO.			
Field selection page...			
You cannot select fields because you have specified an Import Template for this import.			
Import Template			
You have already chosen fields for this import. You may not select an Import Template unless you delete all the chosen fields.			
Length			
DFF=%,DN=1 D ^DIO2 S X=			
CAN'T DELETE THIS NODE.			
VARIABLE-POINTER			
  Used by 			
Answer 'NO' to the 'SHOULD ENTRIES BE SCREENED' prompt to delete the screen			
TRIGGERED-BY			
APPLICATION-GROUP			
LOOKUP PROGRAM^C^^ ; ^S X=$S($D(^DD(D0,0,			
DISTRIBUTION PACKAGE^CJ30^^ ; ^S X=$G(^DD(D0,0,			
PACKAGE REVISION DATA^CJ240^^ ; ^S X=$G(^DD(D0,0,			
RESTRICT EDITING OF FILE^C^^ ; ^S X=$S($D(^DD(D0,0,			
ARCHIVE FILE^C^^ ; ^S X=$S($D(^DD(D0,0,			
COMPILED X-REF ROUTINE^CJ9^^ ; ^S X=$G(^DD(D0,0,			
OLD COMPILED X-REF ROUTINE^CJ8^^ ; ^S X=$G(^DD(D0,0,			
COMPILED CROSS-REFERENCES^CJ3^^ ; ^S X=$S($G(^DD(D0,0,			
Computed field that indicates whether or not cross-references are			
compiled.  This field can be seen when doing an INQUIRE to the FILE 			
file (file #1, sometimes referred to as the file of files.)			
This file stores the descriptive information for all files in the FileMan			
managed database.			
Enter an unused number			
 within the range, 			
DA,0),U,4) S:$L(%) 			
DA,0),U,4) K:$L(%) 			
DA,0),U,1),			
This file stores the PRINT FIELDS data and other information about print			
templates.  These templates are used in the Print, Filegram, Extract, and			
Export options.			
This file stores the EDIT FIELDS data from an input template.			
If this Sort Template should always be used with a particular			
Print Template, enter the name of that Print Template.			
SORT RANGE DATA FOR BY(0)			
VALUE: 			
SORT FIELD DATA			
Literal Subheader			
My Subheader			
SHOULD TEMPLATE USER BE ASKED			
MULTIPLE FIELD DATA			
RELATIONAL JUMP FIELD DATA			
OVERFLOW DATA			
OLD VALUE(S)			
NEW VALUE(S)			
DATA-DESTINATION			
<no previous value>			
DIO:			
DATA TYPE			
This file stores information about FUNCTIONS used by FileMan.  The first			
100 records in this file are reserved for functions brought in during the			
FileMan INIT process.  The rest of the file is available for other			
developers to enter their own functions.			
For a 1-argument function, use 'X' as the argument.			
For a 2-argument function, use 'X1' and 'X'.			
Avoid FORs, IFs, and single-character scratch variables.			
FILEGRAM/EXTR FILE			
FIELD NUMBER			
EXPORT FIELD			
FILEGRAM ERROR LOG			
ARCHIVAL ACTIVITY			
SUBFILE SCREEN			
DESTINATION FILE ENTRIES			
** DISTRIBUTED BY VA FILEMAN **			
), set this field to YES.			
like this			
EXPORT CREATED BY USER NUMBER: 			
OTHER NAME FOR FORMAT			
DESCRIPTION FOR OTHER NAME			
USAGE NOTES			
Lotus 1-2-3 Data Parse			
NOT 1900s			
LOTUS 123 (NUMBERS)			
).  Commas are allowed in the non-numeric data, but			
) are not.			
COMMA DELIMITED			
TAB.			
Tab Delimited			
WINWORD 2.0			
WORD 4.0 (MACINTOSH)			
WORD 5.0 (MACINTOSH)			
FILEGRAM HISTORY			
ALTERNATE EDITOR			
User #			
DA,0),U,8) S:$L(%) 			
DA,0),U,8) K:$L(%) 			
You must use the FileMan option to delete forms.			
DA,0),U) S 			
DA,0),U) K 			
ZZFIELD 1,			
ZZBLOCK 1,			
ZZPAGE 1			
(Block Order 			
OK?			
You must use the FileMan options to delete blocks.			
  (Sub Page Link defined)			
TEST FIELD 1^TEST BLOCK 1^TEST PAGE 2			
TEST FIELD			
 on the block named 			
 on a page named 			
The value is: 			
DDS CREATE FORM			
DDS EDIT/CREATE A FORM			
DDS CREATE BLOCK			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
