English	French	Notes	Complete/Exclude
Select Preferred Report			
Enter an N for National Procedures only, L for Local Procedures only,			
B for a combined report, or ^ to quit.			
Select Sort Method			
Enter N to sort by National Number, P by Procedure Name, or ^ to quit.			
EVENT CAPTURE INACTIVE PROCEDURES			
EVENT CAPTURE NATIONAL PROCEDURES BY NATIONAL NUMBER			
EVENT CAPTURE NATIONAL PROCEDURES BY PROCEDURE			
EVENT CAPTURE LOCAL PROCEDURES BY NATIONAL NUMBER			
EVENT CAPTURE LOCAL PROCEDURES BY PROCEDURE			
EVENT CAPTURE PROCEDURES BY NATIONAL NUMBER			
EVENT CAPTURE PROCEDURES (ALL) BY PROCEDURE			
Enter/Edit Local Categories			
Inactivate Categories			
 is currently inactive.			
Do you wish to reactivate			
Enter YES to reactivate this category or NO to leave inactive.			
 has been reactivated for use.			
 remains inactive.			
Do you wish to inactivate			
Enter YES to inactivate this category or NO to leave active.			
 has been inactivated.			
Enter an A for Active Categories, I for Inactive Categories,			
B for a consolidated report of all categories, or ^ to quit.			
LIST OF ACTIVE LOCAL CATEGORIES			
Press <RET> to continue   			
LIST OF INACTIVE LOCAL CATEGORIES			
LIST OF ALL LOCAL CATEGORIRES			
Inactivate Local Procedures			
Select Local Procedure: 			
Enter YES to reactivate this local procedure or NO leave inactive.			
Enter YES to inactivate this local procedure or NO to leave active.			
 remains active for use.			
Select Procedure			
That procedure already exists.			
This procedure was inactivated on 			
.  You may use the 'Inactivate			
Event Code Screen option to change this date.			
This DSS Unit has not been activated for use in Event			
Capture software.			
You have no locations flagged for Event Capture.			
Procedure Synonym/Default Volume (Enter/Edit)			
There are no event code screens set up for your selected location.			
Contact your program coordinator.			
There are no procedures set up for the selected unit and category.			
Please contact your Event Capture administrator.			
There are no procedures available for the selected data.			
     **Invalid Number**			
      ** Invalid Number **			
 this event code screen 			
Please use the Procedure Synonym/Default Volume (Enter/Edit) option to enter			
an active clinic.			
Enter procedure reason: 			
Enter a valid procedure or press 			
One procedure must be entered before using spacebar/return			
to get the same procedure.			
enter procedures.			
Select a number to edit/delete, or enter N to create a New Procedure:  			
Enter N to create a new procedure, or the number corresponding to the			
procedure that you want to edit or delete.  Enter ^ quit.			
Category : 			
Pr. Date: 			
Service: 			
Section: 			
Select a number to edit, enter N for a New Procedure, or press <RET> to 			
continue listing procedures:  			
Na			
To create a new procedure, type N.  If you would like to edit or delete			
one of the procedures listed, enter the corresponding number.  Press <RET>			
to continue the list, or ^ to quit.			
Event Capture patient data missing.			
You must enter both DATE and TIME to create a new procedure record.			
Enter Date and Time of Procedure: 			
Category not defined.			
 or '^' to stop: 			
Edit or Delete this Procedure:  EDIT//  			
EeDd			
Press <RET> to edit the selected procedure, or enter D to delete			
the procedure.			
Select the number corresponding to the procedure category, or ^ to quit.			
** Procedure code replaced, all modifiers deleted **			
DATE/TIME OF PROCEDURE: 			
NO ELIGIBILITY ON FILE			
You should edit this patient procedure and enter an active clinic.			
Are you sure that you want to delete this entire procedure from			
your records ?  NO// 			
NnYy			
Enter YES to delete this procedure, or <RET> to quit this option.			
Deleting Procedure... 			
Volume			
Type a Number between 1 and 99, 0 Decimal Digits			
All information was not entered.  This procedure has been deleted.			
ENTERING A NEW PROCEDURE FOR 			
SECTION: 			
PROCEDURE: 			
EDITING A PROCEDURE FOR 			
WARNING: More than 1 Primary diagnoses exist for this encounter. All			
Procedures will be updated to have same primary & secondary dx			
 PCE Data Missing			
Deleting entries from the MEDICAL SPECIALTY file (#723)...			
Entries deleted			
Event Capture Locations:  			
Enter the number corresponding to the location you want to 			
Create/Remove current locations for Event Capture use.			
Do you want to create or remove access for a location ?  CREATE//  			
CcRr			
Enter <RET> to flag a location to be used in the Event Capture software, or			
REMOVE to delete access to a location.			
Create			
Remove			
 current locations for Event Capture use.			
 has been flagged for use in the Event Capture software.			
 has not been flagged as a current location.			
Are you sure that you want to remove access to this location ?  NO//  			
If this location should no longer be used for the Event Capture software,			
enter YES.  Enter <RET> to leave this location flagged for use.			
Do you wish to inactivate all event code screens			
for this location? 			
Enter Y to inactivate all screens for this location			
      N or return to leave them active.			
Please wait a few moments			
INACTIVATE EVENT CODE SCREENS			
DEALLOCATE DSS UNIT & INACTIVATE EVENT CODE SCREENS			
REACTIVIATE EVENT CODE SCREENS			
EC HFS SCRATCH			
No patient data found.  No patient record(s) have been filed.			
You have selected the following patients for filing:			
Answer YES to continue, NO to exit.			
Exiting option...no patients filed.			
ECU*			
EC MULT DATES/MULT PROCS DATA ENTRY			
These patients will be sent to the background for filing.			
Queued as Task #			
Diagnosis missing;			
EC MUL PATIENTS			
Provider #1: 			
 DSS Unit: 			
Procedure(s):			
Possible actions are the following:			
>>> This patient could not be found. <<<			
>>> No patient entered. <<<			
EC MUL PROCEDURES			
PROC DT			
PROC NUM			
Modifier:			
>>> This procedure date could not be found. <<<			
>>> This procedure could not be found. <<<			
>>> No Procedure Date entered. <<<			
>>> At least one procedure date must exist before adding a procedure.			
    Please add a procedure date first. <<<			
Another Procedure Date and Time			
Procedure Date and Time			
Enter both date AND time procedure was performed. Future dates are not allowed.			
Reason Not Defined			
This DSS Unit is either inactive or cannot be used			
in Event Capture.  Please select a different DSS Unit.			
A response is required...try again.			
You must enter an 			
Answer YES to accept the unit, NO to start over.			
Ordering Section			
Please Note: The following prompt(s) cannot be by-passed with			
<cr>, since the data is sent to PCE for workload reporting.			
If data cannot be provided, respond with 			
.  This will			
remove the current patient from the selected patient list.			
The clinic you selected is inactive.			
Workload data cannot be sent to PCE for Event			
Capture procedures without an active clinic.			
Please note that data cannot be sent to PCE			
for workload reporting without an ICD-9 code.			
reporting without an active associated clinic.			
unless the classification questions are answered.			
Patient deselected because required data missing.			
DATE/TIME OF PROCEDURE			
RP49'			
DIC(49,			
RP723'			
ECC(723,			
RP724'			
DSS UNIT			
ECD(			
EC(726,			
RNJ4,0			
ORDERING SECTION			
ENTERED/EDITED BY			
PROVIDER #2			
PROVIDER #3			
PCE CPT CODE			
PRIMARY ICD-9 CODE			
RADIATION EXPOSURE			
ENVIRONMENTAL CONTAMINANTS			
HEAD/NECK CANCER			
ASSOCIATED CLINIC			
DSS ID			
DIC(40.7,			
IN/OUTPATIENT			
I:INPATIENT;O:OUTPATIENT;			
PROCEDURE REASON			
ECL(			
PCE;1			
PCE DATA FEED			
PCE1;1			
PCE CPT MODIFIER			
Select Ordering Section: 			
Enter a Begin Date and End Date for the Event Capture 			
Ordering Section report.			
The End Date for this report may not be			
a future date.  Try again...			
This report is formatted for 132 column output.			
No device selected.  Exiting...			
EC Ordering Section Summary			
ECLOC(			
ECDSSU(			
Report canceled...			
Report queued as Task #: 			
No data for this Ordering Section for the date range specified.			
Subtotal for 			
Subtotal for DSS Unit 			
Total for Location 			
Grand Total for Ordering Section 			
Event Capture Ordering Section Summary for 			
for the Date Range 			
DSS Unit			
Vol.			
Provider(s)			
CPT Modifier			
REASON NOT DEFINED			
Start with Date:  			
End with Date:  			
End date must be after start date			
Select Device: 			
This report is designed to use a 132 column format.			
EVENT CAPTURE PATIENT SUMMARY			
No Data for 			
 during the time selected.			
EVENT CAPTURE PATIENT SUMMARY FOR 			
Run Date : 			
PROCEDURE DATE/TIME			
PROCEDURE (CPT) MODIFIER			
Press <RET> to continue, or ^ to quit   			
If you want to continue with this report, press <RET>.  Entering an ^ will			
exit you from this option.			
PROCEDURE(VOLUME)			
ECS/PCE PATIENT SUMMARY			
ECS/PCE PATIENT SUMMARY FOR 			
PROCEDURE NAME SENT (VOLUME)			
CPT CODE (DIAGNOSIS)			
CLINIC (DSS ID)			
CPT CODE			
CPT NAME UNKNOWN			
DSS ID UNKNOWN			
Secondary Dx: 			
Primary DX: 			
EVENT CAPTURE			
EVENT CAPTURE DATA			
There are no current locations defined for this facility.  please contact			
the Event Capture Package Coordinator.			
Do you want to print this report for all locations ?  YES// 			
If you would like to generate this report for all divisions within			
this facility, enter <RET>.  If you want a report containing procedures for			
a specific division, enter NO			
Do you want this report for all DSS Units ?  NO//  			
Enter <RET> if you would like to print this report for a specific DSS			
Unit, or YES to print it for all units.			
Do you want this report for all accessible DSS Units ?  NO//  			
You have access to more than one DSS Unit.  If you want to print			
the report for only one of those units, enter <RET>.  To print the report for all of the units that you have access to, enter YES.			
print this report.			
Start with Date: 			
End with Date: 			
The ending date of the range must be later than the starting date.			
EVENT CAPTURE PROVIDER SUMMARY			
ECD*			
ECL*			
UNIT*			
NO PROCEDURES			
Press <RET> to continue, or ^ to quit  			
Category			
CPT Code			
Description			
Procedure Reason			
CPT Modifier (volume)			
Total Procedures for 			
Select Provider: 			
Starting with Date: 			
Ending with Date: 			
The ending date cannot be earlier than the starting date.  			
Please re-enter			
the ending date.			
Event Capture Provider Summary			
No Event Capture Provider Summary for 			
 to report for the date range selected.			
GRAND TOTAL - PROCEDURES			
EVENT CAPTURE PROVIDER SUMMARY FOR 			
FOR THE DATE RANGE 			
TOTALS AS PROVIDER #			
CPT MODIFIER (Volume of modifiers use)			
TOTAL PROCEDURES			
Provider #2			
Provider #2 will be deleted...			
But that's Provider #1... Try again.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
