English	French	Notes	Complete/Exclude
Select type of recall to perform			
ALL RECORDS - Recall all records from archive media.			
ONE RECORD  - Search entire archive for a specific record			
              and recall it if found.			
Enter ALL or ONE			
RECALL TYPE NOT SPECIFIED			
Please wait while I reopen the archive device.			
But your file is not initialized properly			
Do you want to re-try			
If you answer no the 			
 file will be cleaned out			
Enter Y or N			
ARCHIVE RECALL ABORT			
O.K. Archive file is ready			
Now fetching global			
The global is now on the system disk			
COULD NOT RECALL ALL RECORDS			
Enter the exact 			
 record name. Remember to include			
your station number as a pre-fix! (e.g. 688-B970121-001)			
Exact 			
 record name			
SINGLE RECORD UNSPECIFIED			
Sorry, that record doesn't appear to be on this archive.			
Try another record			
DIDN'T FIND SINGLE RECORD			
Found record 			
Should archived equipment Entry #s be listed			
Engineering Archive Activity Log			
RECORDS TYPE: 			
FILE VERSION: 			
STOP DATE: 			
OPT PARAMETERS: 			
RECORDS SAVED: 			
PHYSICAL LOCATION: 			
TAPE DESCRIPTION: 			
There is no activity recorded			
There is no archived equipment			
Archive Log Report 			
ARCHIVE ID: 			
ACTIVITY TYPE			
ARCHIVED EQUIPMENT LIST			
Search for Equipment ENTRY #			
Enter an archived equipment Entry # (e.g. 4157)			
Equipment ENTRY #: 			
 is not valid			
 was not found in an archive set			
 was saved with record name 			
in the archive set shown above.			
TECHNICIANS ASSIGNED			
WORK ACTION			
THIS VERSION OF 'ENARX11' WAS CREATED ON JAN 25,1991			
BUT I NEED VERSION 17 OF THE VA FILEMAN!			
AT AEMS Development			
 BY VA FileMan V.17.32)			
TO SET UP FOR YOU THE FOLLOWING FILE:			
BUT I'M OBSOLETE!!			
  (PARTIAL DEFINITION)			
  (INCLUDING DATA)			
***BUT YOU'VE ALREADY GOT '			
NOTE -- YOU ALREADY HAVE '			
 WITH DATA			
WANT MY DATA ADDED IN TO YOURS			
I WILL **REPLACE** YOUR DATA WITH MINE, OK			
SHALL I WRITE OVER EXISTING DATA DEFINITIONS			
NOTE: THIS PACKAGE ALSO CONTAINS 			
' BULLETIN FILED -- REMEMBER TO ADD ITS USER GROUPS			
' Menu Option Filed			
HOME ADDRESS			
ACCIDENT NARRATIVE			
CORRECTIVE NARRATION			
EVALUATION OF REPORT			
THIS VERSION OF 'ENARX21' WAS CREATED ON OCT 26,1988			
RESPONSIBLE SHOP			
EQUIPMENT HISTORY			
ORIGINAL BAR CODE ID			
THIS VERSION OF 'ENARX31' WAS CREATED ON JAN 25,1991			
STATION NUMBER not found in Eng Init Parm File.  Can't proceed.			
NOTE: Only the first eight (8) ALTERNATE STATION NUMBERS will be downloaded.			
Select PM Inspector: 			
Enter PROCESS ID: 			
Wrong application. Aborting...			
Enter TIME STAMP of process to be restarted: 			
NO DATA. Aborting...			
Can't seem to find your STATION NUMBER.  Please check File 6910.			
Your IRM staff may need to assist you.			
For which month do you wish to record PMI's: 			
Are you recording a MONTHLY (as opposed to a WEEKLY) worklist			
Week number (enter an integer from 1 to 5): 			
PM-			
Should existing PM work orders be deleted after close out? YES// 			
No data to process.			
VACATED positions may not be selected.			
This bar code PMI program was downloaded for 			
Who actually did the work? 			
If 			
 performed the PMI, just press <RETURN>.			
If you choose another technician, that individual will become the technician			
of record in both the Work Order and Equipment Files.			
If more than one technician worked on a PMI then you should either close that			
PM work order individually (before continuing with this update) or perhaps			
use teams in your PMI program. If you want to abort this update and come back			
to it after closing selected work orders manually (via the 'Close Out PM Work			
Order' option), press the caret key ('^') and be sure to write down the			
'Process ID' and 'Time stamp' that the system will give you.			
Select Device for PMI Exception Messages: 			
LOCATION EXPECTED.			
MOD:			
PM#:			
FOREIGN EQUIPMENT.			
Cannot process a bar code label from another VAMC.			
Press RETURN to continue...			
ITEM NOT IN DATABASE.			
Label was scanned incorrectly or Equipment File is corrupted.			
RECORD LOCKED. Equipment ID#: 			
This record is being edited by another user at this time.			
Please update the inventory data manually.			
BAD LOCATION			
Location not in Space File.  Can't update the Equipment Record.			
   Label scanned as: 			
BAR CODED PMI EXCEPTION MESSAGES  (Time stamp: 			
   Global Reference: ^PRCT(446.4,			
Record PMI (Bar code)			
EN*			
NO LABEL			
NO DESCRIPTION.			
NOTE: Entered MODEL (			
) does not match stored value.			
Model: 			
Serial number: 			
PM #: 			
BAR CODE LABEL MISSING. Equipment ID#: 			
Record will be updated, but bar code label should be printed and applied.			
UNEXPECTED DATA UPLOADED FROM BAR CODE READER.			
Please check entry following 			
Attempting to process: 			
Work order 			
 being edited by another user.			
Can't process.			
CODE:			
 (Bar Code)			
Skipping service history for Equipment ID#: 			
PM Inspection (Recorded via Bar Code Reader)			
Device failed a PM Inspection			
Equipment Entry # 			
 FAILED PMI. CORRECTIVE ACTION REQUIRED.			
This device has no open work order that begins with 			
Nothing is being posted to the equipment history.			
NO STATEMENT OF PROBLEM.			
Problem description: 			
FATAL ERROR OR USER ABORT.			
Process ID is: ENPM     Time stamp is: 			
UNDEFINED.			
Please make a note of this information, as you will need it to RESTART			
processing of the data on file.			
The system is now ready to update the Equipment File on the basis of			
data acquired from the portable bar code reader.			
Data that cannot be processed normally will be reported as Exception Messages.			
These messages will provide notification of such things as missing bar code			
labels and database inconsistencies.			
Exception Messages will also be printed for devices that FAIL their PM			
inspection.  Regular work orders will be automatically generated.  The PM work			
order will be closed with a reference to the regular work order.			
You must now select a hard copy device (printer) to receive PMI Exception			
Messages.			
You may enter the letter 'Q' and then select a device if you wish to			
schedule this data processing task for some later time. You may enter the			
caret key ('^') to abort this update with the intention of manually re-			
starting it at some later date.			
PM Work Order already posted for Equipment ID#: 			
UNSCHEDULED PMI (Bar Code Reader)			
PM Inspection (Unscheduled)			
PREVENTIVE MAINTENANCE			
PM:			
PM work order 			
 is being closed.			
Regular work order 			
 is open.			
 will remain open.			
When closed, it should contain a reference to a regular work order.			
 is being closed out.			
 has been generated.			
GENERAL REPAIR (In-house)			
Generated on the basis of failed PMI  			
OK, enter the device to which the bar code reader is connected.			
Download time: 			
DOWNLOAD SUCCESSFUL, you may now disconnect the bar code reader.			
At what character do you want comments to begin?^35^^30,35,40,45,50^COM^ENCTMES1			
This IDENTIFIER already exists for 			
The PACKAGE NAME SPACE '			
' does not exist !			
The following field translates as the			
 ... Field not a pointer !			
 field of the 			
 which extends to the			
 ... Report needs to be compiled!			
How many copies of each label do you want ?^1^^^COPY^ENCTMES2^QUX?.N&(QUX>0)&(QUX<1001)			
Do you want to SEARCH the 			
 file before sorting (Y/N)? ^N^^^SP^ENCTMES2			
Current Status is: 			
Are you sure you want to reschedule this data to process ?^Y			
OK, nothing scheduled !			
RTN FLD IS MISSING			
RTN IS MISSING			
STARTED ON			
STARTED ON-			
FINISHED ON			
BARCODE DATA PURGE			
Error, name of report is null			
Error, FILE defined for this entry does not exist			
Error, no report text exists!			
Report TEXT line #			
 parameter is invalid!			
Parameter in line #			
 is not numeric			
Parameter #			
 in line #			
 is not defined			
Error, parameter #			
 is defined as FIELD, but has no field defined.			
 is defined as FIELD, but no FILE has been defined.			
 is defined as COUNTER, but START and/or INCREMENT			
  ... are not defined			
 is defined as XECUTABLE CODE, but no CODE has			
  ... been defined!			
Field in parameter 			
 does not exist in file specified			
An invalid field exists for parameter #			
Enter the device to which the bar code reader is connected.			
>>> Use the TRANSMIT option on the bar code reader to start sending data:			
*** Error, Timeout period expired ...			
... No data is being received from bar code reader ***			
    Thank you.  Data is being received...			
*** Error, an identifier was not uploaded ***			
*** Error, bar code data identifier '			
' is non-existent ***			
OK, You are logging data on 			
 ... using the BARCODE program 			
Reading barcode reader ...			
Data transmission complete. Number of records read: 			
Upload time: 			
DATA UPLOAD FAILURE			
DATA UPLOAD SUCCESSFUL			
POST UPLOAD RTN MISSING			
*** OK, transmission of data successful !			
You can purge the files on the barcode reader if you wish.			
Barcode data processor			
Request time to process: 			
* Data will NOT be processed *			
NOT QUEUED			
OK, the data collected on 			
 will be processed on 			
TASKED FOR 			
QUEUE TO PRINT ON			
Are you sure you do NOT want to select a device ?^N			
DEVICE NOT SELECTED			
Checking report integrity ...			
NOTICE: Report NOT compiled due to error(s).			
Compiling report ...			
NO-XECUTABLE CODE			
Report was originally created by: 			
Last modified by: 			
Date/Time modified: 			
This IDENTIFIER alread exists for 			
 ... routine does not exist			
 ... Sorry, Your DUZ (user value) is not defined			
 ... Sorry, your FileMan access is not defined			
 ... Sorry, only programmers can use this field			
 ... MUMPS code has an error			
ENGINEERING EQUIPMENT MANAGEMENT MODULE			
Enter a new equipment inventory item			
Enter 'Y' to add a new Equipment Record.			
Enter multiple equipment inventory items			
This option allows a rapid entry of multiple items which			
are alike; e.g. 25 new electric beds.			
Proceed by entering the first item in full			
For each additional equipment entry enter:			
 SERIAL #, LOCATION, VA PM NUMBER, and LOCAL IDENTIFIER (if any).			
Enter another item			
Enter YES to add another similar equipment item			
Screen entry			
Enter 'Y' for screen handler, 'N' for standard FileMan.			
EQENTER]			
Please enter SERIAL # if available. Otherwise press <return>.			
List of existing equipment with a similar Serial #			
Manufacturer			
Mod: 			
Ser #: 			
Do you still want to add this new record			
Another user is editing Entry # 			
Would you like to include this item in the PM program			
ASK INCOMING INSPECTION W.O.			
Create an Incoming Inspection Work Order			
This Equipment Record is both NONEXPENDABLE and CAPITALIZED.			
The same will be true of other records created using this option.			
Do you wish to send an FA document to Austin			
...Setting up new equipment record			
SORRY, CAN'T LOCK ^ENG(6914,0) GLOBAL, TRY LATER			
Unable to add new record at this time...			
 for display			
Record being edited by someone else. Try later.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
