English	French	Notes	Complete/Exclude
the patient's problem list, enter 'Quit to Problem List'.			
Continue to Next Selected Problem			
Quit to Problem List			
ERROR -- Cannot continue ... Returning to Problem List.			
Hide Duplicate Problem for GMPL*2*12			
TASK JOB DID NOT RUN!			
Start Task with  D TASK^GMPLDUP2			
GMPL DUPLICATE PROBLEMS			
GMPL*2*12			
SMITH,VAUGHN@ISC-SLC.VA.GOV			
Patch GMPL*2*9 corrects Problem List routine GMPLUTL1 exported with the			
Lexicon Utility v 2.0			
    Could not find Lexicon Utility v 2.0.  This patch should only be 			
    installed at sites using version 2.0 of the Lexicon Utility			
    Lexicon Utility v 2.0 installed without data global.  Please install			
    the Lexicon data global exported in HF LEX_2_0.GBL then restart 			
    this installation.			
    Lexicon Utility v 			
Retrieving current data for problem 			
ERROR -- Cannot continue.			
  SC Condition: 			
6  ICD Code: 			
You may change one or more of the above listed values describing			
this problem by entering its display number (1-			
) at the prompt;			
you may then enter a new value, or '@' to delete an existing value.			
Enter RM to remove this problem from the patient's list completely,			
SC to save your changes, or Q to simply return to the problem list.			
Enter '+' to see more information, as in the problem list.			
>>>  THIS PROBLEM HAS CHANGED!!			
Do you want to save these changes			
Enter YES or <return> to save the current values listed above			
describing this problem; enter NO to exit without saving.			
DATE OF ONSET: 			
Enter the date this problem was first observed, as precisely as known.			
Date of Onset cannot be later than the date the problem was entered!			
DATE RECORDED: 			
Enter the date this problem was first recorded, as precisely as known.			
Date Recorded cannot be later than the problem was entered!			
>>>  Currently known service-connection data for 			
Patient has no service-connected condition !! 			
Is this problem related to a service-connected condition? 			
If this problem is due to a service-connected condition, enter YES;			
press <return> and leave blank if this is unknown.			
Enter the clinic			
al service			
 to be associated with this problem.			
Only clinic			
s are allowed!			
RECORDING PROVIDER: 			
Enter the name of the provider responsible for the recording of this data.			
Enter the name of the local provider treating this problem.			
Enter the ICD code to be associated with this problem			
ICD Code may not be deleted!			
This problem has an inactive ICD code. Please edit the problem before using.			
ANOTHER 			
CAUTION:  			
This problem			
 will be completely removed			
          from this patient's list!!			
Are you sure? 			
Enter YES to delete 			
this problem			
these problems			
 from the current patient's list.			
DO NOT use this option to remove problems from your currently			
displayed view of the Problem List!!			
Returning to Problem List.			
This problem does not require verification.			
Choose from: 			
      ... more, or ^ to stop: 			
  INVALID DATE			
Date cannot be in the future!			
Examples of valid dates:			
   T   (for TODAY),  T-1 (for YESTERDAY),  T-3W (for 3 WEEKS AGO), etc.			
You may omit the precise day, such as Jan 1957, or			
If the year is omitted, a date in the PAST will be assumed.			
Radiation			
Head and/or Neck Cancer			
Is this problem related to 			
Enter YES if this problem is related in some way to the patient's			
exposure to 			
Enter the number of the item(s) you wish to change			
GMPL EDIT REFORMULATE			
GMPL EDIT ONSET			
GMPL EDIT STATUS			
GMPL EDIT PROVIDER			
GMPL EDIT SERVICE			
GMPL EDIT ICD			
GMPL EDIT SC			
GMPL EDIT SP			
GMPL EDIT NOTES			
GMPL EDIT NEW NOTE			
GMPL EDIT VERIFY			
VALM NEXT SCREEN			
ICD CODE			
DATE OF ONSET			
IS THIS PROBLEM RELATED TO A SERVICE-CONNECTED CONDITION?			
IS THIS PROBLEM RELATED TO AGENT ORANGE EXPOSURE?			
IS THIS PROBLEM RELATED TO RADIATION EXPOSURE?			
IS THIS PROBLEM RELATED TO ENVIRONMENTAL CONTAMINANTS EXPOSURE?			
IS THIS PROBLEM RELATED TO DIAGNOSED HEAD AND/OR NECK CANCER?			
IS THIS PROBLEM RELATED TO REPORTED MILITARY SEXUAL TRAUMA?			
RESPONSIBLE PROVIDER			
DATE RECORDED			
RECORDING PROVIDER			
  ^-jumping not allowed now!			
Select the field you wish to jump to, by number			
Enter a description of this problem, up to 80 characters.			
This problem has not yet been saved.			
Enter <Q>uit and it will not be added to the list.			
Press RETURN to redisplay the problem text			
NOTE 			
Enter any text you wish appended to this problem, up to 60 characters			
in length.  You may append as many comments to a problem as you wish.			
   Are you sure you want to delete this comment? 			
   Enter YES to completely remove this comment from this patient's problem.			
Text may not exceed 60 characters!			
DATE RESOLVED: 			
Enter the date this problem became resolved or inactive, as precisely as known.			
Date Resolved cannot be prior to the Date of Onset!			
  (A)cute or (C)hronic? 			
  You may further refine the status of this problem by designating it			
  as ACUTE or CHRONIC; problems marked as ACUTE will be flagged on the			
  list display with a '*'.			
GMP PATIENT ACTIVE PROBLEMS			
GMP SELECT CLINIC COMMON PROBLEMS			
Select PROBLEM: 			
GMP SELECT PATIENT ACTIVE PROBLEMS			
 removed by 			
placed back on list			
 changed by 			
AUTNPOV(			
LEX(757.01,			
DATE LAST MODIFIED			
PROVIDER NARRATIVE			
ENTERED BY			
DATE RESOLVED			
AGENT ORANGE EXP			
RADIATION EXP			
ENV CONTAMINANTS EXP			
REC(			
LAST MOD			
SERVICE/PROVIDER			
You may select one or more of the above listed items by entering			
its display number (1-			
) at the prompt; if the text if followed			
by '...', all problems under that heading will be displayed for			
selection.  Enter AD to select a problem not listed above.			
If you enter a list or range of numbers to add several problems,			
you will be presented with each to complete, one at a time.			
Enter + to see more items, as in the problem list.			
GMPL LIST SELECT ITEM			
>>>  Adding problem #			
>>> Adding a problem not on the menu ...			
Service/Provider			
    No data available meeting criteria.			
To update the problem list first select from Add, Remove, Edit,			
Verify, 			
Inactivate, or Comment, then enter the problem number(s).			
If you need more information on a problem, select Detailed			
Display; to change whether all or only selected problems for this			
patient are listed, choose Select View.  Enter ?? to see more			
actions for facilitating navigation of the list.			
Problem statuses: *-Acute I-Inactive #-Inactive ICD Code			
Listing already includes inactive problems!			
Patient has no inactive problems to include.			
 from which you wish to view problems:			
, one at a time, from which you wish to view			
problems; press <return> when you have finished.			
Enter the name of the provider whose problems you wish to view:			
If you wish to see only those problems of the current patient that			
are associated with a specific provider, enter his/her name here.			
GMPL VERIFY			
Searching for the patient's problem list ...			
SERV CONNECTED			
Contaminants			
Mil Sexual Trauma			
the problem list select from Add, Remove, Edit, Inactivate,			
and Enter Comment; you will then be prompted for the problem			
number.  To see all of this patient's problems, both active and			
inactive, select Show All Problems; select Print to print the			
same complete list in a chartable format.  To see a listing of			
Print a new problem list? 			
Press <return> to generate a new complete problem list for this patient;			
enter NO to continue without printing.			
>>>  THIS PATIENT'S PROBLEM LIST HAS CHANGED!			
CURRENT VIEW: 			
Inpatient, 			
Outpatient, 			
all problems			
GMPL VIEW 			
You may change your view of this patient's problem list by selecting one or			
more of the following attributes to alter:			
GMPL USER PREFS			
Preferred View saved.			
Retrieving the list of clinical services ...			
    No clinical services available to select from.			
Retrieving the list of clinics ...			
    No clinics available to select from.			
AL SERVICE			
To create or change your preferred view, choose either Add or			
Remove; those 			
 you add will be flagged above with a 'Y'.			
Within the Problem List application, ONLY those problems associated			
with your selected 			
 will initially be displayed, however			
the entire list is always available using its Select View option.			
If you wish to create a view according to 			
 instead, or not			
to have a view at all, choose Select New View or Delete respectively.			
>>>  YOUR PREFERRED VIEW HAS CHANGED!!			
Enter YES to have only problems from the 			
s indicated above			
listed, when initially displaying a patient's problem list;			
enter NO to retain your previous view.			
Services			
Clinics			
   ?? More actions			
CURRENT VIEW:  			
 services included			
 clinics included			
None defined			
              (Default is outpatient, all clinics included)			
Do you want to change your preferred view? 			
Enter YES if you want to change your preferred view of patient			
problem lists; NO will exit this option, leaving your view unchanged.			
Your preferred view will determine what information you see about			
each problem, and whether you see a complete or partial list.			
Select VIEW: 			
Choose from: Outpatient			
An OUTPATIENT view will display information regarding the clinic that			
is following each problem; an INPATIENT view will display service and			
responsible provider information.			
Include (A)ll problems or only those from (S)elected 			
Enter A to display all active problems for the selected patient, or S to			
see a partial list.  You may select specific 			
inpatient services			
outpatient clinics			
, and only			
those problems associated with them will be shown at first; the remainder			
of the patient's problems are always available to display through the			
Select View			
You may not have more than 60 			
s included in your view!			
Your view currently includes 			
Please select again, choosing no more than 			
Include all sub-services/sections of 			
This service is a 'parent' to other services/sections,			
listed indented above; enter YES to include all of these			
as well in this action, or enter NO to exclude them.			
Enter the display number of the 			
(s) you wish to select			
Are you sure this is ok			
You may have only one preferred view at a time.			
Enter YES to change how your preferred view is defined,			
or press <return> to keep the view you currently have.			
>>>  This action will clear your current view of problems by 			
and present a list of 			
 to replace it with.			
Are you sure you want to delete your preferred view			
Enter YES to remove your preferred view; the default view of Outpatient,			
including all active problems, will be used to display problem information.			
Enter NO to continue editing your current view.			
Deleting preferred view of 			
Print (C)urrently displayed problems only, or include (A)ll problems? 			
Enter C to print a copy of your currently displayed view			
of this patient's list; to print a complete list of all			
active and inactive problems, which may be included in			
the patient's chart, select A.			
No problems found.			
One moment, please ...			
PROBLEM LIST OF 			
GMPRT(			
** NOT for 			
Medical Record			
PARTIAL 			
PROBLEM LIST			
Date of   Date			
     Recorded  Problems			
Onset  Resolved			
Pt Loc: 			
VAF10-141			
VA FORM 10-1415			
$ = Requires verification by provider			
Printed:			
No 'removed' problems found for this patient.			
REMOVED PROBLEMS FOR 			
Removed  By Whom			
Press <return> to continue or ^ to exit ...			
Replacing problem(s) on patient's list ...			
has an inactive ICD9 code and will not be replaced.			
Select the problem(s) you wish to replace on this patient's list: 			
Enter the problems you wish to add back on this patient's problem list,			
as a range or list of numbers.			
Enter YES if you are ready to have the selected problems put back on this			
patient's problem list; press <return> to exit without further action.			
No patient data available.			
PROBLEM LIST PATIENT LISTING			
PATIENTS WITH '			
Total of 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
