English	French	Notes	Complete/Exclude
to run!			
Do you want to queue this option to run each night at 1:30am			
CM Tools Background Driver..: KMPD BACKGROUND DRIVER			
QUEUED TO RUN AT............: 			
RESCHEDULING FREQUENCY......: 			
TASK ID.....................: 			
QUEUED BY...................: 			
Terminated - 			
Hl7 Dly Bckgrnd last start..: 			
HL7 Dly Bckgrnd last stop...: 			
HL7 Dly Bkgrnd total time...: 			
HL7 Wkly Backgrnd last start: 			
HL7 Wkly Bckgrnd last stop..: 			
HL7 Wkly Bckgrnd total time.: 			
KMPD-CPRS			
TMG Collection Status.......: 			
STOPPED!			
TMG Dly Bckgrnd last start..: 			
TMG Dly Bckgrnd last stop...: 			
TMG Dly Bkgrnd total time...: 			
Oldest			
Recent			
8973.1 - CM HL7 DATA			
8973.2 - CM TIMING			
CM TOOLS			
No Problems			
Current Version			
Should be			
OR*3.0*209			
*** Patch OR*3.0*209 must be installed for CPRS Timing data to be collected ***			
Timing Collection is currently [ 			
Do you want to '			
' the collection			
Timing Collection has been [ 			
 Average Coversheet Time-to-Load (TTL) Report 			
This report displays the daily average time-to-load value for			
the coversheet at this site.  Average time-to-load values are			
given for either daily prime time or non-prime time periods.			
*** There is currently no data in file #8973.2 (CP TIMING) ***			
KMPDATE()			
Compiling timing stats...			
CV  = Coversheet			
TTL = Time-to-Load			
Average TTL			
Minimum TTL			
Maximum TTL			
# of CV Loads			
 Daily Coversheet Time-to-Load (TTL) Detailed Report 			
This detailed report displays daily time-to-load values for the			
coversheet at this site.  The report breaks the time-to-load			
metrics into ten second groupings.			
<No Data for 			
90 or greater			
TTL Seconds			
CV Percent			
 Hourly Coversheet Time-to-Load (TTL) Report 			
This report displays the hourly average time-to-load value			
the coversheet at this site over 24 hours.			
Hour			
TTL Average			
TTL Minimum			
TTL Maximum			
 Hourly Coversheet Time-to-Load (TTL) Detail Report 			
This detail report displays the hourly time-to-load values			
for the coversheet at this site.  The report breaks the			
time-to-load metrics into ten second groupings.			
<No Data>			
Hr			
# CV Loads			
 Coversheet Time-to-Load (TTL) Alert Report 			
This alerting report shows the particular coversheet loads			
which had excessive time-to-load values. This report will			
search for a particular person, a particular client name or			
IP address.			
KMPDSRCH()			
Total Count: 			
Threshold: 			
User Name			
Client Name			
IP Address			
Time-to-Load			
 Coversheet Time-to-Load Alert Report > Real-Time 			
which have excessive time-to-load values for TODAY (Real-Time).			
This report will search for a particular person, a particular			
client name or IP address.			
*** There is currently no data in global ^KMPTMP(			
Hour(s): 			
 Real-Time Hourly Coversheet Time-to-Load (TTL) Report 			
Compiling Timing data...			
 records filed!			
Select # of Days Review			
Select Hour(s) to Review			
 ==> building list...			
KMPDTU10-LIST			
Select Client			
Search By			
Select User: 			
Select Time-To-Load Threshold (Seconds): 			
 ==> building Hours list...			
Select Hour(s)			
not sent			
 (* for All)			
Select Institution: 			
LOCAL($J)			
(* for All): 			
 (* for All): 			
...you are allowed only one selection...			
...'*' not allowed...			
...variable 'ARRAY' is undefined...			
...variable 'DIC' is undefined...			
...global must have a subscript (ex: '^TMP($J' )...			
...global names must be either '^TMP' or '^UTILITY'...			
...no entries have been selected...			
...'All' entries have been selected...			
Selected Entries from 			
Enter '?D' to display entries selected so far.			
Select '*' for all entries or			
Select entries by typing one or more characters and then the '*'			
    Example:  'A*'     - will select all entries begging with			
                         the letter 'A'			
              'SMITH*' - will select all entries begging with			
Press <RET> to continue, '^' to exit Help			
You may remove entries that have been selected so far by			
entering a minus sign (-) before the entry to be removed			
    Example:  '-JONES,JANE' - will remove the entry 'JONES,JANE'			
                              from the array			
              '-SMITH*' - will remove all entries beginning with			
                          'SMITH' from the array			
     *** It is important to note that using the   ***			
     *** minus sign (-) only removes entries from ***			
     *** the array storing the selected entries,  ***			
     *** it DOES NOT remove any entries from the  ***			
     *** look-up file                             ***			
Press <RET> to continue: 			
     ERROR - Not able to reschedule 			
     Use 'Schedule/Unschedule Options' [XUTM SCHEDULE] to reschedule.			
 or '^' to exit: 			
Windows			
NO DATE			
PTCHINFO+			
ZL @RTN S INFOSITE=$T(+2)			
Enter the starting date.			
Date must not precede 			
Date must not follow 			
Enter the ending date.			
CM Error			
 at site 			
Purging old records...			
Press RETURN to continue, '^' to exit			
Select Time Frame			
      PRIME TIME => Weekdays 8 am till 5 pm			
  NON-PRIME TIME => Weekdays after 5 pm and before 8 am			
                    and Weekends all day			
CLUSTER_MEMBER			
HW_NAME			
ACTIVECPU_CNT			
NODE_CSID			
.COM - Obtain System Configuration Information			
$! OIFO - CAPACITY PLANNING/KAK			
$   write sys$output 			
 then goto NOT_CLUSTER			
$   if ID .eqs. 			
 then goto EXIT			
NODE=			
TYPE=			
CPU_CNT=			
SPEED=n/a			
MEMSIZE=			
$   goto START			
SPEED=			
What is the operating system:			
Choose (1-3): 			
OpenM-NT			
ZL @KMPLD ZS @KMPSV			
SAGG Program for this environment is NOT implemented !			
RUM Error at site 			
  The following error(s) have been logged at 			
  while moving data from ^XTMP(			
) to file 8971.1.			
Date..: 			
Prime Time     = 			
Non-Prime Time = 			
$AFTR ZTMS$			
$STRT ZTMS$			
KMPR PROC			
Transmitting data to national database...			
KMPRBD04-3			
HRSDAYS=			
RUM DATA~			
 RUM Data by Option/Protocol/RPC 			
RUM Data by Option for '			
...compiling data...			
KMPR OPT DATA			
<<<No Data to Report>>>			
RUM Data for Option: 			
per Occurrence			
 Hourly Occurrence Distribution 			
Select DATE 			
Enter a date.			
RUM Hourly Occurrence Distribution			
Compiling data...			
SCMC PCMM GUI WORKSTATION			
<<<No Data>>>			
  <<<Partial Data>>>			
Hourly Occurrence Distribution for 			
 Total    Total			
  Occ      User			
KMPR HR STATS			
 Data for All Nodes (Graph) 			
compiling data for: 			
RUM Data for All Nodes			
Node			
 RUM Data by Date for Single Node 			
Select Node			
RUM Data by Date for Node '			
 Package Resource Usage 			
This option will display the package Resource Usage Monitor statistics.			
The printout summarizes the statistics of the options, protocols and			
tasks for a selected namespace as percentages.			
Select Package Namespace (case sensitive)			
RUM Package Resource Usage for '			
KMPR PKG %			
Package Resource Usage			
Node 			
   %  			
Options			
Protocols			
Packages			
 Begin Post-Install...			
 Removing data from ^XTMP(			
 Cleaning up ^KMPTMP(			
 Checking RUM Background Job...			
KMPR BACKGROUND DRIVER			
 Cleaning up 			
 xref in RESOURCE USAGE MONITOR file...			
 Post-Install complete!			
Status......................: 			
 The 'RUM Background Driver' option [KMPR BACKGROUND DRIVER] is missing !			
The 'RUM Background Driver' [KMPR BACKGROUND DRIVER] is not scheduled			
RUM Background Driver.......: KMPR BACKGROUND DRIVER			
Daily Background last start.: 			
Daily Background last stop..: 			
Daily Background total time.: 			
Weekly Background last start: 			
Weekly Background last stop.: 			
Weekly Background total time: 			
Temporary collection global			
8971.1 - RESOURCE USAGE MONITOR			
RUM Environment			
The Resource Usage Monitor is already running.			
Answer YES to start collecting Resource Usage Monitor data			
Do you want to start Resource Usage Monitor collection			
Resource Usage Monitor collection is started.			
Resource Usage Monitor collection is NOT started.			
The Resource Usage Monitor is already stopped.			
Answer YES to stop collecting Resource Usage Monitor data			
Do you want to stop Resource Usage Monitor collection			
Resource Usage Monitor collection is stopped.			
This option displays data in a graphical format.  Please make			
note that this output is intended for comparison/trends only,			
and should not be used for detailed analysis.			
Reporting Period: 			
Printed on: 			
Enter Key Data Element for Searching RUM Data			
' at this time			
' is not scheduled to run			
Do you want me to queue this option to run every night at 1 a.m.			
Select Package Namespace			
Please enter a valid package namespace.			
Deleting old records...			
Deleting old entries from ^KMPTMP(			
   SAGG Project for this M platform is NOT implemented !			
ZL @X S PTCHINFO=$T(+2)			
 The SAGG Project has recorded an error on volume set(s):			
 See system error log for more details.			
 Also run INTEGRIT on the listed volume(s).			
 The SAGG Project collection routines have been STOPPED!  No report			
 The SAGG Project collection routines did NOT obtain ANY global			
 information.  Please ensure that the SAGG PROJECT file is			
 properly setup.  Then use the 'One-time Option Queue' under			
 Task Manager to re-run the 'SAGG Master Background Task'			
 [KMPS SAGG REPORT] option.			
 NO GLOBALS 			
 Please ensure that the SAGG PROJECT file is properly setup.  Then use			
 the 'One-time Option Queue' under Task Manager to re-run the 'SAGG			
 Master Background Task' [KMPS SAGG REPORT] option.			
 than 3 days.  No report has been generated.			
 SAGG Project Error: 			
Windows 95			
 *** It is STRONGLY recommended that the 'SAGG Master Background Task' ***			
 *** [KMPS SAGG REPORT] be rescheduled to run over the weekend hours.  ***			
 The SAGG Project collection routines monitored the following:			
 Please ensure that this list concurs with your present volume set			
 A local e-mail message #			
 was created by the collection			
 routines.  Check the FO-ALBANY.MED.VA.GOV NetMail Queue to ensure			
 transmission delivery.			
 SAGG Session: 			
SAGG Project Message (Session #			
KMP-CAPMAN			
Running Pre-install routine ...			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
