English	French	Notes	Complete/Exclude
   Removing references to KMPS-SAGG mail group ...			
KMPS-SAGG			
    INFO: KMPS-SAGG mail group is missing.			
    INFO: Removing MEMBER GROUP KMPS-SAGG in 			
 mail group ...			
   ERROR: Cannot remove KMPS-SAGG from 			
 mail group			
   ERROR: KMP-CAPMAN mail group is missing.			
   Moving KMPS-SAGG mail group members to KMP-CAPMAN ...			
Pre-install routine complete.			
Install will continue ...			
XMVVITAE+1^XMVVITAE			
MEMBER GROUPS			
MEMBER GROUP			
XMB(3.8)			
MEMBERS - REMOTE			
DISTRIBUTION LIST			
FAX RECIPIENT			
FAX GROUP			
   ERROR: Cannot add 			
 to KMP-CAPMAN mail group			
Running Post-install routine ...			
   Removing KMPS-SAGG mail group ...			
   ERROR: Cannot remove KMPS-SAGG mail group.			
          Use FileMan to delete KMPS-SAGG mail group.			
Post-install routine complete.			
SAGG Environment			
KMPS SAGG REPORT			
Current Status:			
Session Number:			
Start Date:			
SAGG Master Background Task:  			
 option is missing !			
Queued to run at:			
Rescheduling frequency:			
***It is STRONGLY recommended that this job be rescheduled to run			
over the weekend every 28 days.***			
Task ID:			
Queued by:			
***The user that originally queued this task is no longer active.			
Therefore the 'SAGG Master Background Task' [KMPS SAGG REPORT]			
must be scheduled again by an active user.***			
DATA PRESENT			
Global Location:			
SAGG Environment (cont.)			
SAGG Project collection routines will monitor the following:			
SAGG Project collection routines are still running on:			
SAGG Project collection routines have recorded an error on			
the following Volume Set(s):			
SAGG has been running over a day. Use ^%S			
 and check to see if			
the KMPSGE routine is still running.			
NOTE:  Any incomplete data that has been collected will be			
deleted automatically the next time that SAGG runs.			
First determine the cause of any volume set errors.			
Reschedule SAGG to collect global data if necessary.			
Patch Status			
<No routine patch information available>			
Currently			
Need to			
Install			
<<<missing routine>>>			
Ok			
The SAGG Project collection routines are not running.			
Current status of SAGG is 			
Do you wish to manually STOP the SAGG Project collection routines (Y/N)			
The SAGG Project collection routines have been notified to begin an			
orderly shut-down process.			
Please specify the Volume Set and UCI which will hold the ^XTMP(			
Specify the 			
Volume Sets			
Directories			
 which hold your VistA production globals.			
For example:			
Cache for Windows NT =>  W:\VAA, W:\VBB, W:\VCC ... V:\Vxx			
Cache for OpenVMS =>  _$1$DKAn:[CACHSYS.VAA] ... _$1$DKAx:[CACHSYS.Vxx]			
DSM =>  ROU, VAA, VBB, VCC ... Vxx			
Specify all locations of VistA globals			
Do NOT specify 'test/training' 			
KMP-CAPMAN mail group:			
 (MEMBER GROUP)			
 (DISTRIBUTION LIST)			
 (FAX RECEIPIENT)			
 (FAX GROUP)			
NO USERS			
 This field will contain the name of the 			
 that the site wants			
 to monitor with the SAGG Project collection routines. The site should			
 specify only the 			
 which hold their VistA production globals:			
 For example:			
    Cache for Windows NT =>  W:\VAA, W:\VBB, W:\VCC ... V:\Vxx			
    Cache for OpenVMS =>  _$1$DKAn:[CACHSYS.VAA] ... _$1$DKAx:[CACHSYS.Vxx]			
 Do NOT specify 'test/training' 			
This is the			
text to display.			
IOECH;IOELALL;IOELEOL;IORVON;IORVOFF;IOSTKMPUBM			
, [N]ext Screen			
, [P]revious Screen			
Enter 'X' (or '^') to exit.			
Enter 'N' to advance to the next screen.			
Enter 'P' to backup to the previous screen.			
UTIL($J,			
...no array data...			
...no information to graph...			
...too many data elements to double space on a terminal			
   for a Horizontal Graph...			
   for a Vertical Graph...			
...unable to place terminal in graphics mode...			
...unable to determine any data to graph or data all zeros...			
IOECH;IORVOFF;IORVON;IOUOFF;IOUON			
IORVON,			
IOG1,			
The following graph selections are 'optional':			
Enter one or more option letter(s): 			
Angle Data Titles only available with a Vertical Graph...			
...please be aware that because of screen limitations Vertical			
   Graphs are not as accurate as Horizontal Graphs and should be			
   used for visual comparison rather than detailed analysis...			
' is not an available option.			
A: Angle data titles..:  Angle the titles (for Vertical Graphs only).			
D: Double space data..: Will place an empty column/row between graph bars			
                        (it is highly recommended that double spacing be used			
                        with Vertical graphs).			
G: Grid...............: Print grid lines on graph.			
S: Scientific Notation: If values are 1000 or greater the graph will normally			
                        display a description as...: (x10k),  (x100k), etc.			
                      - Scientific notation will be: (x10^2), (x10^3), etc.			
V: Vertical graph.....: The default is horizontal display.			
                      - Selecting this option will display data vertically			
                        (graph bars running top to bottom).			
There are no LAB routines running to check			
There are no Interface's in the Auto-instrument file.			
Checking Interface # 			
  Routine for this Interface not started.			
Interface check ... This may take a minute. 			
Interface data line is 			
NOT WORKING			
OK 			
LET ME TRY ONCE MORE			
Sending string for Interface # 			
Install Environment Check FAILED			
Environment Check is Ok ---			
Terminal Device is not defined			
Please Log in to set local DUZ... variables			
You are not a valid user on this system			
You must have LAB V5.2 Installed			
Don't Start/Collect			
Don't Start			
Rebuild			
LA7-INST			
Lab Auto Download			
include uncollected accessions			
No download routine (field #94)			
Invalid download routine (field #94)			
Invalid download routine label (field #93)			
 specified for AUTO INSTRUMENT: 			
Not Running^Running^Start/Restart Auto Download Job^Shutdown Auto Download Job^Shutdown Auto Download Job and Stop Collecting Accessions			
Select action			
 accessions waiting checking			
1 - Start/Restart the auto download job after changes have been made to			
    file #62.4, AUTO INSTRUMENT, that affect auto downloading,			
    i.e. instrument auto download status changed, tests added/removed,			
    download code changed, etc. or if background job is not running.			
2 - Shuts down auto download background job and set flag to not start.			
    Accessions are still collected in list to be downloaded when			
    auto download job is started.			
3 - Same as 2 but stops collecting accessions to download.			
Auto Download flag set to 			
Auto Download 			
- Queued to run as task #			
- not tasked			
No instruments currently flagged for automatic downloading.			
Use build and download a load/worklist options to download.			
Selection Method			
Download from 			
No accessions found to download			
Found 			
 accessions that can be downloaded.			
Ready to download			
Done - 			
 scheduled for downloading!			
Select Option			
Enter 'YES' to print the integrity report.			
Lab Messaging File Integrity Checker			
LA7*			
Bad 			
 cross-reference of 			
 for entry 			
 points to incorrect entry 			
 points to missing entry 			
 on entry 			
 for entry: 			
Lab Messaging -Warning- 			
 errors found in File #62.49, LA7 MESSAGE QUEUE.			
LA7ERR-			
G.LAB MESSAGING			
Print LA7 File Integrity Report			
Unable to obtain lock on entry 			
 in file #62.49			
 entries in LA(			
) global - please check.			
LA7ADL-			
 - Did NOT finish			
 - Still running			
No reports on file!			
Print LA7 Messaging Integrity Check			
    NO entries to print			
   Total number of entries: 			
    Total number of errors: 			
 Integrity Checker Started: 			
Integrity Checker Finished: 			
--- Lab Messaging Integrity Checker Report ---			
Lab Messaging File Integrity Checker Report			
For Date: 			
Do you wish to Add or Edit a Bedside Monitor			
Enter BEDSIDE MONITOR INTERFACE NAME			
Enter Bedside Monitor Name (ie. CareVue, Marquette)			
Enter wards associated with this bedside monitor			
There is an error with this entry.			
 already on file			
 Current Wards for 			
 Current Bedside Monitors			
Enter the name of the NEW Bedside Monitor			
 exists, please select a new name.			
 does not exist. Do you wish to add it?			
Ward already on File, DELETE (Y/N) [N] 			
  Must enter Y or N			
LA7D CARELIFE SERVER			
Unable to send out test result to CAREVUE, Protocol Server is not setup			
ERROR IN SENDING LAB RESULTS TO 			
G.CARELIFE RESULT ERROR			
There was an error in building an HL7 Lab Result Message for accession			
of patient name: 			
The error was 			
Please make a note of it and take any actions that necessary			
no MSH in 772			
no config in 62.48			
config is inactive			
Log routine was called with a non-existant code number (			
Lab Messaging Error Log			
Nothing logged for Today!			
Look at log for what date? 			
Nothing logged for 			
Select CONFIGURATION: 			
Print message text with error			
Do you want the text of the message also printed with the error			
Answer 'Y' or 'N'			
Lab Interface Error Log			
Report queued...			
LA AUTO INST			
>>>LA AUTO INST entry already exist...			
>>>Adding HL7 DHCP APPLICATION file entry for LA AUTO INST...			
LA AUTO INST^a			
CH,MI			
LA7-QRY			
No results found for requested parameters			
LA7-61			
LA7-DN			
LA7-LN			
LA7-NLT			
Unknown search code 			
AUTO-INST			
Invalid patient identifier passed			
No patient found with requested identifier			
No laboratory record for requested patient			
Database error - missing laboratory record for requested patient			
Invalid list of subscripts: '			
Are you using a barcode reader			
Scan barcode			
Patient/Accession Info (PD)			
Scan Patient Name Barcode (PD1)			
Patient Demographics not found			
Select Shipping Configuration			
Select SHIPPING CONFIGURATION: 			
Are you editing this entry as the			
Is this entry used by the Collecting facility to ship specimens,			
or by the Host facility to accept a shipment.			
This determines which fields are edited in the file.			
AGENCY CODE			
Unable to proceed - institution 			
 missing AGENCY CODE field			
Select SHIPPING CONFIGURATION to COPY FROM: 			
Select SHIPPING CONTAINER: 			
Select SHIPPING METHOD: 			
Select SHIPPING CONDITION: 			
Copy a test profile from			
Do NOT copy			
If you want to duplicate a shipping configuration using another configuration			
or build from the tests marked as catalog tests in the LABORATORY TEST file.			
Select the appropiate option.			
Tests already exist for this configuration!			
Copying tests from configuration: 			
Copying tests from file #60 LABORATORY TEST to 			
FDA(629)			
LA7DIE(629)			
Clearing existing tests from configuration: 			
Select action to perform			
Do you want to ship this manifest			
Select TEST to Add: 			
User aborted			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
