English	French	Notes	Complete/Exclude
I will now CLEAR out the global			
Search pass has not completed. 			
Want to CLEAR ^LAR anyway			
ARCHIVED LR DATA^63.9999			
Now read the tape back in to make sure we have a good tape.			
Then do the PURGE pass.			
 Please clear and reload the archive global.			
PURGE in progress, or completed. Please let it finish.			
LR(			
Not in the right state.			
PURGE LRDFN			
ERROR LOG REPORT: 			
Printer 			
Print Archive Patients			
I'VE CROSSED OVER.......			
TEST=			
Found a diferent major header. I will increment page now.			
START OF PURGE PASS			
Data not found.			
 Sub Script = 			
**PURGE PASS DONE ** 			
My preliminary screening process reveals 			
The SEARCH process is complete.			
 Percent of ^LR was searched			
Total patient count: 			
. Specimen count: 			
Search not complete.			
Searching in progress, please wait for it to finish.			
Do you want to restart the search			
Continue where the last search stopped.			
Please enter a name for the archive session: 			
You must create a NEW name for this ARCHIVE.			
Enter 1 for CH subscripted. Micro will be with next patch			
Please enter a number 1			
What lab section do you wish to Search			
Archive Start DATE: 			
Enter a date in the past where I should begin looking.			
Enter 1 for days to archive ie 1,7,30,60,90 etc			
Enter 2 for Patients results between a date range.			
Enter 3 for a specific month and year...11/97			
Enter 4 ... 1/97 for Jan-Feb-Mar of 1997 or 2/97 for Apr-May-June of 1997 etc			
Enter 5 year 1996 gets you all of 1996			
OK BYE BYE			
Enter # of days			
Enter Month/Year...May 1997...June 1994			
9/94 for September 1994			
Month and year: 			
You forgot the month.			
FIRSTQ(LRYEAR)			
SECONDQ(LRYEAR)			
THIRDQ(LRYEAR)			
FOURTHQ(LRYEAR)			
Please Enter a Year: 			
LREDT=			
Do you want to print a specific DIVISION?			
If you have a multi-divisional institution you might want to print a particular division, otherwise your report will reflect the whole instution which might not be what you have intended.			
Select a Division:			
Do you want to look up by Specimen Type and/or Collection Sample			
<All> will not prompt for a specimen or sample			
Do you want to select by TESTS or WKLD CODES (YES or NO )			
Do you want to select by (T)est or (W)KLD Code or (A)ll			
All means no specified TEST or WKLD code is desired and will take you to the next prompt.			
You can only select either by TESTs or by WKLD CODEs			
Choosing ALL will take you to the location prompt right away.			
Selecting by WLKD codes will limit you to a particular test only,			
whereas by TEST might give you 1 or more WKLD codes.			
LRSITE*			
LRSP*			
LRCOL*			
LRTST*			
LRCAPS*			
LRCPSX*			
LRLOC*			
Topography or Specimen : ALL/ 			
 Select another specimen: 			
Select another Collection Sample: 			
Select LABORATORY TEST: All//			
 Select another LAB test: 			
Select WKLD CODES: All//			
Select another WKLD code:			
Select INSTRUMENT or WKLD SUFFIX CODE: All//			
Select another 			
Select URGENCY to be counted as STAT: 			
Select another: 			
Do you want to look up only tests with a STAT urgency			
Select LOCATION NAME: All//			
Select another location: 			
Select Patient Type: 			
The codes are as follows:			
   R  -  OTHER PATIENTS  			
   A  -  ALL OF THE ABOVE			
Select another Patient Type: 			
Do you want to see a break out of controls for the condensed			
TESTS by INSTRUMENTS			
Enter YES if you want this extra section printed, NO if you don't.			
Enter the number for the workload data to report			
    reportable for LMIP.			
1 - will include all workload data in the file, period.			
2 - will include only workload which is associated with a			
    WKLD code that is marked as reportable for LMIP uses.			
3 - will include any workload which is not marked as			
Sorry, there is no primary institution in file 67.99999.  Exiting.			
Select Division: 			
Nothing Selected 			
ALL WORKLOAD DATA FOR: 			
LMIP WORKLOAD DATA FOR: 			
Non-LMIP WORKLOAD DATA FOR: 			
;2:LMIP report;3:CDR and LMIP reports			
Enter the number for the report(s) you want printed			
CDR format selection: 			
RCS14-4			
This file does not have an archival activity with the status of archived.			
Therefore this file may be incomplete if archiving is still in progress.			
XY 			
ARCHIVED LR RCS/CDR REPORT			
LRDA*			
PTF Treating Specialty			
Service Listing			
Billing Bed Section			
 Total Count for Report = 			
ARCHIVED RCS-CDR/LMIP REPORT			
 Errors were found in Data Base 			
Review Detail Report for Specifics			
TOT-AP/CP			
LMIP REPORT printed 			
Pathology Laboratory Medicine Service Workload Summary			
LINE  SECTION			
In-patient			
Out-patient			
Non-patient			
Quality			
Referred			
Tests			
Control			
On-site			
Performed			
(Send Outs)			
LMIP Data Number			
Anatomic Pathology Division			
AP subtotal			
Clinical Pathology Division			
CP subtotal			
LMIP SUPPLEMENTAL REPORT printed 			
Supplemental Pathology Laboratory Medicine Service Workload			
STD/Rep			
Manual			
Micro			
In-Pat			
Others			
Stats			
This option will restore Laboratory data that has been archived 			
This data will again be removed from the ^LR global the next time the			
ARCHIVE program runs.			
The LAR global is not on the system.  Load it			
from where you have it stored and start again.			
Checking ^LAR( for New Person Conversion 			
You must FIRST run the option			
 'Convert archived data to use New Person file			
File appears to have been Converted to New Person.			
Do you wish to restore data for ALL patients 			
No identifier defined for this patient			
NO ARCHIVED DATA EXISTS FOR THIS PATIENT! 			
The file entries do not match, I can go no further!			
DONE FOR THIS PATIENT			
ALL DONE !			
Just answer 			
This may take some time!			
Would you like to run the conversion option now 			
No data archived.			
SEARCH PASS DONE			
BAD DATA 			
KILLED UNVERIFIED DATA 			
KILLED HEADER WITH NO DATA 			
NO 0 NODE FOR ^LR(			
Please finish the Clear and Purge steps first.			
Welcome to The Search Option for the New Archive Modual			
A file entry IS NOT present			
Shall I prepare a list of patients that will have data archived			
Answering YES to this question will produce			
a list of patients that will have data archived.			
Tape name not defined. Please start again.			
Archive search option.			
LAB DATA ARCHIVE for data before 			
Number of Days To be searched: 			
 Has Been Deleted from ^LR( 			
SSN = Unknown			
Entries with bad Data			
Entries that were not verified			
Entries with no data			
LRAR-WL			
WKLD STATS BY MAJ SEC REP			
CLINICAL PATHOLOGY			
ARCHIVED WORKLOAD STATISTICS BY MAJOR SECTION			
REPORT DATE RANGE:  			
NO DATA FOR THIS INSTITUTION AND DATE RANGE			
MAJOR SECTION			
LAB SUBSECTION			
NUMBER  :			
PERCENT :			
MAJOR SECTION:  			
LAB SUBSECTION:  			
SUB TOTAL			
COMBINED SUMMARY			
ARCHIVED WORKLOAD COST REPORT BY MAJOR SECTION			
UNIT COUNT			
UNIT COST			
COMBINED GRAND TOTAL			
SELECT ALL INSTITUTIONS?  YES// 			
ENTER YES OR NO, Y OR N			
BEGINNING DATE/TIME:  			
ENDING DATE/TIME:  			
Do you want to select accession areas (YES or NO) 			
Enter 'YES' to limit report to one or more accession areas.			
SUMMARY REPORT ONLY?  NO//			
Do you want only the summary?  YES or NO.			
ARCHIVED WORKLOAD INPUT MANUALLY			
[Includes all manual archived workload data for date range]			
Workload Procedure              Code      STANDARD       QC   REPEAT   MANUAL  			
  *** NO SQRM DATA FOR THIS REPORT ***			
Grand SQRM Totals: 			
PRINT THE COMMENT PAGES?  NO//			
Do you want to print comments?  YES or NO.			
GENERAL WORKLOAD COMMENTS			
[Includes all archived workload data in date range]			
WORKLOAD COMMENTS by WKLD CODE			
WORKLOAD COMMENTS by DATE			
Would you like the report in PTF Treating Specialty 			
Device is busy  Try later			
TREATING SPECIALTY ARCHIVED WORKLOAD REPORT			
ARCHIVED WORKLOAD REPORT			
*MISSING LOC*			
NO ACCN			
TST/TOT			
TST/LOC			
TST/LRM			
TST/CTL			
TST/URG			
*** NO DATA TO REPORT ***			
*** new heading ***			
*** new sub-heading ***			
TOTAL TESTS by METHODOLOGY by DAY			
% of Grand Total			
% of days workload			
GRAND TOTAL of TESTS DONE = 			
 ***** end of report *****			
TOTAL TESTS BY LOCATION: % of GRAND TOTAL			
TOTAL TESTS by INSTRUMENTS: % of GRAND TOTAL			
Total CONTROL TESTS by INSTRUMENTS: % of GRAND TOTAL			
TOTAL WKLD by TESTS: % of GRAND TOTAL			
TOTAL TESTS by 'STAT' URGENCY for  ALL PATIENTS: % of GRAND TOTAL			
TOTAL TESTS by 'STAT' URGENCY for 			
OTHER PATIENTS			
UNKNOWN PATIENTS			
: % of GRAND TOTAL			
     Collection sample(s) 			
     Workload code(s) 			
[ ALL PATIENTS ] 			
[ OTHER PATIENTS ] 			
[ UNKNOWN PATIENTS ] 			
     STAT tests only			
 D E T A I L E D *			
Workload Report			
ACCN AREA: 			
Archived Workload Report			
Lab Test 			
Instrument			
Date verified			
 Archived Workload Report			
PRESS RETURN TO CONTINUE, 			
 TO QUIT.  			
*ERROR* CAN'T FIND WKLD CODE:  			
>>> Deleting OLD 'LAB' ARCHIVING options in OPTION file.			
LR ARCHIVE EXTRACT 			
Removing Print template 			
Linking LRAR ARCHIVE MAIN MENU option to LRLIAISON ...			
LRAR ARCHIVE MAIN MENU			
Option 			
 is missing from your option file.			
Couldn't attach option called 			
Couldn't attach to option 			
 is already attached to 			
Couldn't add option 			
Added option 			
Installation of patch LR*5.2*59 completed.			
DOES NOT EXIST IN THE 'OPTION' FILE...NOTHING DELETED!			
NOT ATTACHED TO ANY MENUS AS AN ITEM...NOTHING TO REPOINT OR DELETE!			
' REMOVED from OPTION file...			
REMOVED from '			
>>> Deleting OLD 'LAB' ARCHIVE FILES.			
DELETING ARCHIVED WKLD DATA FILE.			
DELETING ARCHIVED LAB MONTHLY WORKLOADS FILE.			
DELETING ARCHIVED BLOOD INVENTORY FILE.			
The data dictionaries for these files will be reinstalled during the inits.			
First enter a date range selection to archive the			
LAB MONTHLY WORKLOADS file (67.9).			
Beginning DATE: 			
Ending DATE: 			
WOULD YOU LIKE TO PRINT SELECTED ENTRIES			
Do you want to delete this archival activity and forget this for now			
You must enter a beginning and ending date.			
Now deleting this archival activity...			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
