English	French	Notes	Complete/Exclude
[Test IEN]  Test Name  Type 			
Negative Report - All test have RNLT codes definded			
LOINC Historical Mapping Exception Report			
List of test mapped to LOINC codes formatted with '^' as field delimiter.			
DataName#^Test Name^Specimen^Specimen IEN^RNLT^NLT suffix^LOINC Code			
LOINC Historical Mapped LOINC tests			
LRFDA(95)			
 This will re-run LOINC Historical Mapping from the beginning 			
reseting all globals to zero.			
 To restart from a stopping point use the			
LAB DATA LOINC Mapping Option.			
Are you certain you want to proceed			
This option will allow you to manage how specific DataNames			
will be mapped to LOINC Codes for historical data.			
You are able to override file definitions to correct past LOINC mappings.			
Select the CH subsripted test, indicate the suffix to be used.			
You can indicate if this suffix should override previous LOINC Mapping.			
This option will REMAP your entire database.			
This option should only be run on weekends after hours.			
 Do you wish to continue 			
Selection can be a 'CH' Atomic or Panel test.			
Selection can be an Atomic or Panel test.			
Only those tests with a Result code will be stored.			
Select test you want to modify mapping			
Nothing was selected, Process Aborted			
Here is a list of what you have selected.			
[O] indicates override current mapping.			
  Do you want to STOP			
You wish to add more			
 Do you want to delete an entry			
Override Yes			
 Entry not Valid			
 Select Suffix Code			
Override previous LOINC mapping			
LOINC code to map this test			
LOINC CODE: 			
SYSTEM: 			
CLASS: 			
PROPERTY: 			
TIME ASPECT: 			
SCALE TYPE: 			
METHOD TYPE: 			
Enter LOINC Code/Name 			
Enter LOINC Code Name or LOINC Number			
You can see possible LOINC CODES/Specimen by entering the			
LOINC Test Name..Specimen   example( GLUCOSE..UR )			
VistA Lab Test to delete/unmap to LOINC 			
Select Lab test you wish to delete/unmap to a LOINC Code			
Enter a TOPOGRAPHY having a LEDI HL7 code defined.			
Specimen Source: 			
 has a broken pointer			
 is NOT mapped to 			
  Time Aspect of: 			
Are You  - SURE-   you want to delete this mapping			
This test and specimen is mapped to:			
Are you sure you want to delete this mapping			
If you enter yes, the current LOINC code mapping will be deleted.			
This option prints a list of specimens from the			
LAB ELECTRONICS CODE file (#64.061).			
This list may assist you when linking your			
local TOPOGRAPHY (#61) entries with the file 64.061.			
LEDI HL7 REPORT			
LEDI HL7 ELECTRONIC SPECIMEN CODES			
* Source HL7 0070 Table			
This test is already mapped to:			
Default LOINC code: 			
 this default mapping			
If you enter yes, the current default LOINC code will be overwritten with the default LOINC code that you have chosen.			
This option will print tests and their RESULT NLT CODES			
assigned. Result NLT codes are required for LEDI and LOINC			
Mapping software to function properly.			
You may use the option 'Link Result NLT Manual' to make necessary changes.			
All will print Lab Tests with and w/o result NLT codes tests			
Print Lab Tests and Result Codes			
 **** Corrupt DATABASE ****			
Specimen [ 			
]  Mapped to LOINC CODE			
Total Printed Tests: 			
Alphabetical Listing of CH Subscripted Lab Tests			
That have RESULT NLT CODES assigned			
That do not have RESULT NLT CODES assigned			
  IEN     Lab Test Name 			
      NLT #        Result NLT Code Name 			
This option prints a list of the LABORATORY TESTS from the LABORATORY TEST FILE.			
You will be prompted to print lab tests that are			
mapped/not mapped to a LOINC code.			
Inactive(Type:Neither) lab tests are not reported.			
Print lab tests that are mapped/not mapped to a LOINC code.			
Select 1 for mapped, 0 for not mapped or 2 for Individual			
You can only select test that have been mapped.			
You can a quick list of mapped tests by entering '?'.			
Then enter 'Yes' you want a complete list.			
You must select a Mapped LABORATORY TEST			
Nothing Selected			
LAB TESTS MAP REPORT			
LRMAP*			
REQUEST QUEUED 			
LAB TEST :  			
 Individual Mapped			
 NOT Mapped			
 TO LOINC CODES			
LAB TEST			
RESULT NLT			
This option will print WORKLOAD CODES and their LOINC CODES.			
You may use the option 'MAP LOINC TEST TO NLT' to make necessary changes.			
Print WKLD CODES MAPPED TO LOINC			
*** WKLD CODE 			
 ] IS CORRUPTED 			
Collection Type: 			
LOINC= 			
Total Number of Mapped WKLD CODES/Specimens: 			
Alphabetical Listing of Workload (WKLD) CODES 			
that are Mapped to LOINC Codes.			
NLT IEN #        WKLD CODE Name 			
THERE IS NO RESULT NLT CODE			
LOINC CODE = 			
DEFAULT LOINC CODE = 			
Alphabetical Listing of Laboratory Tests 			
LABORATORY TEST NAME			
NLT IEN #   WKLD CODE Name 			
This option prints a list of SITE/SPECIMENS from the LABORATORY TEST FILE			
 Standard LEDI HL7 specimen codes in the Topography file.			
You will be prompted to print the specimen with or without the LEDI HL7 codes; 			
Print Topography with or without a LEDI HL7 CODE and Time Aspect.			
TOPOGRAPHY REPORT			
REQUEST QUEUED TO 			
A LISTING FROM THE TOPOGRAPHY FILE OF SPECIMENS WITH LEDI HL7 CODE			
AND HAVE TIME ASPECT ENTERED			
FILE 61			
SITE/SPECIMEN			
ELEC CODE NAME|TIME ASPECT			
LAB SPECIMEN WITHOUT LEDI HL7 CODE			
THESE SPECIMENS NEED LEDI HL7 CODES DEFINED IN THE TOPOGRAPHY FILE			
LAB TEST NAME			
This option allows the user to add/edit			
 Lab Electronic specimen codes in the Topography file.			
It is recommended that you print a copy of Specimen codes 			
 to assist you in editing SITE/SPECIMENS.			
Print a copy of the Electronic Code specimens			
Select Topography Specimen to Map: 			
NAME OF NLT CODE: 			
NLT CODE: 			
DEFAULT LOINC CODE: 			
Select a Specimen source that has a LEDI HL7 code			
TEST NOT MAPPED			
Unknown code number			
LOINC Code: 			
LOINC code was located @ NLT CODE: 			
VistA Lab Test			
Select Lab test			
You MAY select one now to continue with the LOINC lookup			
LR LOINC			
LRLNCX TEST LIST			
Ready to Capture			
(NOTE) You should use the Add/Edit Topography Specimen HL7 Code			
[LR LOINC LEDI HL7 CODE] option before you proceed.			
This option will create a Local Master Observation File (LMOF)			
from your local LABORATORY TEST (#60) file.			
Only 'CH' subscripted test having a dataname and having a type			
of 'BOTH', 'INPUT' or 'OUTPUT' will be extracted.			
The LMOF file will use the vertical bar '|' as the field separator.			
The 1st. field is the test internal number and internal number			
of the spec. (i.e. 1-72 will represent test 1 and specimen 72).			
The 2nd field contains |test name<SP>specimen.			
The 3rd field is the reporting unit only (if any).			
You will need to capture this printout into a text file.			
Using a text editor, remove extraneous lines from the beginning			
and the end of the file so that only extracted test names remain.			
Save the edited file. Use this file in the import function of the			
Regenstrief LOINC Mapping Assistant (RELMA).			
Consult the Regenstrief RELMA documentation for specifics.			
Select extraction criteria			
Select accession area 			
Select another accession area 			
No Version node defined in file 64.			
Did you run the LRLS init when installing version 5.0			
Since you have not run the LRLS init yet I am now going to clean up			
amis data from file 60 (Lab Test) and file 64 (Amis/Cap).			
BAD LRAN ENTRY: 			
Expand panels			
If yes, each panel encountered will be expanded.			
Do you wish to see unverified data			
If yes, unverified data may also be displayed.			
Spacing: 1// 			
Single, Double, Triple spacing, etc.			
NO DATA TO REPORT			
No Collect Date/Time			
Spen			
SHORT 			
TO DATE: 			
ORD:			
Accession:  			
  added too many tests to the display.			
Need more columns on the display than are available, Either use a wider			
device or try fewer accessions (fewer tests may be encountered, resulting in			
a narrower display).			
Key:^done = mult test comp.^ pen = mult test incomp.^spen = stat mult incomp.^number = result^.... = incomplete^S... = STAT incomp.^ | = not ordered			
ANOTHER ACCESSION AREA: 			
Accession area selected has a YEARLY Accession date, you didn't choose that.			
Accession area selected has a DAILY Accession date, you didn't choose that.			
Accession area selected has a MONTHLY Accession date, you didn't choose that.			
  BATCH LOG-IN			
WANT TO ENTER COLLECTION TIMES			
Yes or No			
LROT(			
LROU(			
Sample and source incompletely defined, test skipped.			
Any other antibiotics			
Select TEST/PROCEDURE: 			
None Preselected			
Report is changed to 'AMENDED'			
Enter the accession number			
No tests associated with this accession			
Verify with accession #: 			
Someone else is editing this accession 			
(This is an AMENDED report)			
NO TESTS ON WORKLIST			
 template doesn't exist for Microbiology.			
Return represents an incomplete test, date/time represents when completed.			
  Sure you want to delete			
This will set the test back to 'incomplete' status.			
Date must not be in the future.			
  Have the same edit template.			
    Are all complete			
EDIT CODE IN FILE 60 NOT DEFINED.			
Nothing matches with the test you preselected.			
HEALTH DEPARTMENT REPORT  (			
Isolated Organism: 			
Printed :  			
 COLLECTION SAMPLE: 			
Accession Number: 			
MARRIAGE STATUS: 			
 PRESS '^' TO STOP 			
Veteran's ethnicity: 			
Veteran's race: 			
You must have the 'LRVERIFY' key to verify results.			
Micro Accession Year: (			
Would you like to review the data as the (W)ards will see it, as			
the (L)ab will see it, or (N)ot review the data?  W// 			
Area to review:			
Enter a number 1,2,3,4 or 5			
Here's what's been edited:			
Indicate those you wish to permanently exclude (unless re-edited) from review.			
Excluding the following:			
Are you sure you want to exclude			
Answer 'Y'es or 'N'o			
Verify all work edited for a given area			
You may verify one person's work or all person's work.			
Whose work?: 			
Answer 'W', 'L', 'N' or '^' to exit.			
Ward copies may have certain data suppressed from review.			
If you've already reviewed the data, answer 'N' to approve the data.			
Indicate those you wish to exclude from verification.			
Verifying all but the following:			
Want the approved reports to be printed at the requesting locations			
Are you ready to verify			
If you're not sure, it's not too late to quit.			
 is not your accession.			
Do you want to queue the data to print and review/approve it later			
Or you could look at it now!			
MICROBIOLOGY CUMULATIVE PATIENT REPORT			
Select SPECIMEN/SOURCE: ANY//			
Select MICROBIOLOGY TEST: ALL MICRO//			
Enter Accession Numbers			
>> CONTINUATION OF 			
MICROBIOLOGY SINGLE SPECIMEN REPORT			
1  Look-up by Accession number			
2  Look-up by name/ssn			
Nothing accessioned			
Acc 			
Select #: 			
Doesn't exist.			
CULTURE RESULTS:			
  ('*' indicates display is suppressed)			
ADM: 			
   ADM DX: 			
MICROBIOLOGY LAB 			
INFECTION CONTROL SURVEY DATA			
Use default reports			
No reports were selected!			
Start  Date: 			
End    Date: 			
TIME TO RUN: T+1@1AM//			
Default reports are setup in the Laboratory Site file, 69.9.			
If you answer 'NO', you can select individual surveys grouped by:			
organism, location, patient, and/or physician.  You can select all items			
or a single item for each group.  You can also select to have all groups			
contain a survey of a single organism.  Surveys can be reported by			
Site/Specimen or Collection sample.			
INFECTION CONTROL SURVEY REPORT BY 			
** Reports only those specimens collected > 			
 from admission date **			
** ANTIBIOTIC PATTERN **			
INFECTION CONTROL SURVEY REPORT BY ORGANISM			
Organism			
Month/Year			
AC#			
Will all reports be for a single bacterium			
Do you want all survey data for just one organism?			
Select Bacterium: 			
Will all reports be by (S)ite/specimen or (C)ollection sample? 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
