English	French	Notes	Complete/Exclude
Lab Order Stats			
LEDI COST REPORT			
Division(s) / 			
FACILITY TOTALS by : 			
 Referral Patients 			
All Patients 			
    TOTAL COST  			
No Detailed data to report			
<*>  Detailed Patient Listing  <*>			
<*>  LABORATORY TEST ORDERING STATISTICS  <*>			
Referral Patients Only Report			
For tests ordered during the date range 			
Dollar Amounts computed using 			
PRICE 			
** SELECTED TESTS ONLY **			
   TOTAL COST  			
TESTS BY:			
TEST:			
BY:			
TESTS ALREADY ON THE ACCESSION: 			
Select Original Ordered Test 			
Add LABORATORY TEST: 			
The accession already has this test.			
That test normally belongs to accession area 			
are you sure			
URGENCY must be defined.  Test not added.			
What Accession number: 			
CAN'T DO IT.  The data has been approved for that log number.			
 The ability to DELETE an entire ORDER/ACCESSION 			
has been REPLACED. The test(s) will now be marked			
as Not Performed and a reason for 'NP' will be stored			
with each test. Accession numbers can't be reused			
after it has been assigned to a specimen.			
You are not authorized to change test status.			
  Change Entire accession to Not Perform !! 			
All accessioned test(s) changed			
Must be whole number between 1 and 999999, accession remains unchanged.			
All the individual tests for this panel			
are already included on this accession.			
Accession has no Test 			
Someone else is working on this accession			
Someone else is working on this data.			
 Can't find Lab Data for this accession			
Change which LABORATORY TEST: 			
Select another test: 			
No Test Selected			
NO CHANGE			
There is no Order for this Accession			
Change Accession : 			
 Marked Canceled by Floor			
 Marked Not Performed			
*Cancel by Floor:			
*NP Action:			
*Not performed			
No Subscript for this Accession Area 			
Nothing Changed			
Select NP comment Lab Description screen  			
Select Lab Description file screen to be used to expand your NP reason.			
 Press return to accept the default expansion screens.			
Select the Lab Description file expansion screen.			
The default expansion screens are GENERAL, ORDER and LAB			
You may select addition lab description expansion screens			
Press return if you want to only use the default screens			
Reason for Cancel			
Not Perform Reason 			
You must enter Reason			
Satisfactory Comment 			
*Floor Cancel Reason:			
*NP Reason:			
 Floor Canceled: 			
 Not Performed: 			
Sorry  This accession 			
 No longer exist			
 Accession may have been deleted.			
Someone else is editing this order			
 Added by 			
Urgency Turnaround Time			
Select the laboratory tests to be used in this report --			
     LABORATORY TEST: 			
LAB URGENCY TURNAROUND TIMES			
Urgencies:			
Enter all urgencies you want extracted.			
Select Division(s) 			
Include a detailed report			
  enter 'Y'es or 'N'o			
LAB - 			
****** END OF REPORT ********			
LEDI - 			
LEDI Management Report - 			
LEDI Utility - 			
 Institution included in report:			
      Turnaround Time (TAT) - 			
Regular (0701-1700) 			
Irregular			
   Number of tests                Total time             Ave TAT			
Tests:			
Test               Number of Tests   Total TAT       Ave TAT			
Regular			
TAT       Acc           Test               In                  Out			
Tests not counted:			
Regular hours:			
Irregular hours:			
none found			
ANSWER 'YES', 'NO', '^', '@'			
or press RETURN key to accept default response (if one)			
THIS MAY TAKE A WHILE^LET ME PUT YOU ON 'HOLD' ^HOLD ON^JUST A MOMENT PLEASE^I'M WORKING AS FAST AS I CAN^LET ME THINK ABOUT THAT 			
TO SORT IN SEQUENCE, STARTING FROM A CERTAIN NAME,			
TYPE THAT NAME			
TO SORT ONLY UP TO A CERTAIN NAME,			
You are not a valid user.			
You do not currently have a valid Division assigned.			
Log off the system and try again.			
You have only one Division Defined in the New Person file, change not possible.			
Division Unchanged - Currently you are assigned to 			
Division is now set to [ 			
1.  Add patient(s) to report print queue			
2.  Delete report print queue			
3.  Print single report only			
4.  Print all reports on print queue			
Select print option: 			
   SELECT A NUMBER FROM 1-4			
FIND PATIENT MISMATCHES IN VA PATIENT NUMBER FIELD OF FILE 65			
) Unit IFN:			
DATE/TIME RELOCATION: 			
PATIENT MISMATCHES IN 65.03,.07 DATA ELEMENT			
Must have DIVISION VARIABLE 'DUZ(2)' defined.			
You must choose a location			
Do you want to see the entire HOSPITAL LOCATION File?			
Please choose a location within your division			
Type in at least two characters of your choice			
    OR type in ^ to exit			
ENTER WORKLIST DATE: 			
NUMBERS ONLY			
Someone else is editing this Patient 			
CLEAR WORKLISTS OVER 90 DAYS			
CONSULTATION REPORT			
Select CONSULTATION: 			
Must have an accession area for 			
DIRECT COOMBS TEST REPORT			
 entry in LAB LETTER file (#65.9) was deleted.			
CLINICAL RECORD 			
There are no specimen dates for 			
No serum antibodies present.			
SERUM 			
 % OF THE POPULATION WILL BE COMPATIBLE.			
% Compatible Units: 			
Patient has a positive Direct Coombs Test; however, no eluate antibodies are present for specimen dated: 			
Is present testing OK 			
 changed from:			
Above changed:			
Delete an Accession Number			
Accession number date: 			
No accession numbers for 			
Select Accession # : 			
Enter NUMBERS only			
Accession number 			
ACC # 			
Report completed &/or released, deletion not allowed.			
  DATE RECEIVED: 			
NOT DELETED			
Entry not in file			
 data change audits			
OK to delete audits			
PRISONER OF WAR VETS			
LABORATORY SERVICE 			
 Special patients  			
Find results for one or more tests (maximum of 13)			
from one date to another			
Patient count: 			
Repeat tests in one day:			
Total tests:			
Find accessions with comments containing			
1. reported incorrectly as			
2. specimen rejected			
reported incorrectly as			
specimen rejected			
List accessions with deleted comments 			
Do you want list of tests ordered for each accession with errors 			
New page for each accession area 			
 (deleted by 			
Name/SSN			
Select lab test to check a range of values: 			
Select Specimen Type to check: 			
Not a valid specimen for the test selected.			
1. Greater than a value			
2. Less than a value			
Select value: 			
Must be a numeric value.			
Report for: 			
Brief listing: 			
Start with file number: 			
End with file number: 			
TABLE OF CONTENTS FOR FILES			
Enter a number.  No other characters allowed.			
 does not equal 			
Dates of birth are different			
Donor:			
 not entered in PATIENT FILE			
Another patient: 			
The above entries not yet printed.  Do you want to delete them 			
No date for 			
 doesn't exist for 			
LOCATION ABBREVIATION DOES NOT EXIST			
Accession list date:  			
Start with Acc #: FIRST // 			
 Log-Book for 			
#= Not PATIENT file			
Acc no			
Spec/Sample			
Byte count for accessions			
ACCESSIONS: 			
  AVERAGE BYTES/ACCESSION: 			
Print/display tests for a single patient or group 			
Print/display microbiology results (excluding antibiotics)			
instead of defined lab tests			
Print by (T)est list  (P)atient list			
Enter T or P: 			
  Enter 'T' for Test List or 'P' for Patient list			
List for: 			
Work copy- DO NOT PUT IN PATIENT'S CHART			
Delete users' lab test/patient lists			
if they haven't used the lists since: T-6 MONTHS// 			
Enter a date in the past			
You have no patient list.  To enter patients answer the following prompt:			
(A)dd/edit patients			
(T)ransfer list to  another user			
(D)elete list			
(P)atient group deletion			
(M)erge   list with another user			
(S)end list to printer			
Enter R, A, T, D, P, M, S or <CR> to accept list: 			
Your patient list has been deleted			
Transfer patient list to another user (current user list is saved)			
Transferring			
Transfer completed.			
Merge patient list with another user's list			
No patient list for 			
Merging			
Merge completed.			
Press <CR>, <RETURN>, or <ENTER> key 			
Remove patients by (N)umber or (P)atient name			
Enter N or P: 			
Enter 'N' to delete by number or 'P' to delete by patient.			
Select number to delete patient 			
To delete a patient select a number 			
within range shown above			
Number 			
 was deleted.  It is not necessary to enter the same number again.			
Patient list for: 			
Select patient to delete: 			
(P)rint test lists			
Enter E, D, R, P or <CR> to accept lists: 			
You have no test lists.  Instead of creating your own			
would you prefer to copy another user's lists 			
 has no test lists.			
Test list for 			
New page for each patient 			
F:FINAL REPORT;P:PRELIMINARY  REPORT;			
RPT DATE:			
PT GRP: 			
Site/specimen			
Collection sample			
No Room			
1. Single patient			
2. Group of patients			
3. Patients for a ward			
4. Patients for a clinic			
Select 1,2,3 or 4: 			
Select CLINIC DATE: 			
n't meet on 			
You have no groups to select from.			
Select group number: 			
Select a number from 1-			
Print ALL test lists 			
Enter test list number(s): 			
Enter your test list numbers			
Your test list numbers are:			
To see the tests for the above numbers use the			
'Enter/edit user defined lab test lists' option.			
MICROBIOLOGY REJECTED SPECIMENS FROM: 			
DATE TAKEN			
 ACCESSION LIST			
LIST BY PATIENT 			
LIST BY COLLECTION SAMPLE 			
Select COLLECTION SAMPLE: 			
Cell block (b) count: 			
Slide count:			
 ACCESSIONS for 			
Collection Sample: 			
# = Not VA patient  			
* = Reviewed by pathologist			
Slide			
Acc num			
Patient/Source			
Organ/tissue			
Specimen/Sample			
Entry not in lab results file			
Not in lab results file			
No SNOMED code			
Entry not in lab result file #63.			
  BY PATIENT			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
