English	French	Notes	Complete/Exclude
Building display...this may take a moment			
Data extracted for 			
 No entries found for 			
START_PPPPRT2			
PPP - Medication Profiles from other VAMC(s)			
Patient Medication Profiles For Clinics On 			
Parameter File Not Found			
TOTAL PATIENTS = 			
PRTBYNM_PPPPRT20			
PPP Foreign Facility Xref File			
by patient as of --> 			
FACILITY NAME			
LAST VISIT			
PRTBYSTA_PPPPRT21			
by station as of --> 			
STAHISTP_PPPPRT22			
STATION HISTOGRAMS			
Pharmacy Prescription Practices			
Foreign Facility Histograms			
Stations Vs. Number Of Patients			
As Of --> 			
VISHISTP_PPPPRT23			
Number of Stations Visited Vs. Number Of Patients			
DATASUM_PPPPRT24			
Data Summary			
Total Number Of Patients In Patient File........................			
Total Patients In Other Facility Xref File......................			
Total Number Of Stations Visited................................			
Total Number Of Entries In Other Facility Xref File.............			
 Other Station			
Total Number Of Patients With Visits To 			
Print Cross-reference By Patient Name			
Print Cross-reference By Station Name			
Print Station Histogram			
Print Visit Histogram			
Print Data Summary			
FOREIGN FACILITY CROSS-REFERENCE PRINT UTILITIES			
There is no data in the Foreign Facility Cross-reference File			
Select Range Of Items Or 'A' For All: 			
Input Error -> 			
Improper Format			
Value Out Of Range			
Please Re-enter.			
Please wait..building display for '			
PPP FFX REPORTS			
  ** No Data to Display ... <Return> to exit 			
LISTING COMPLETE.			
Visits to other facilities are on file for ==>			
PPP - Medication Profile from other VAMC(s)			
 ** WARNING ** Patient is identified as : 			
'PPP FFX DISPLAY' List Template...			
PPP FFX DISPLAY^2^^^6^16^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX DATA DISPLAY^1			
'PPP FFX REPORTS' List Template...			
PPP FFX REPORTS^2^^^8^21^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX REPORT DISPLAY^1			
'PPP LOG DISPL' List Template...			
PPP LOG DISPL^2^^^6^20^1^1^^^Display PPP Log^1			
'PPP PRINT' List Template...			
PPP PRINT			
PPP PRINT^2^^^8^21^1^1^PPP FFX ENTRY^^PPP V1.0 - FFX REPORT DISPLAY^1			
'PPP PROFILE' List Template...			
PPP PROFILE^2^^^6^18^1^1^Prescription^^Medication Profile			
RX#^1^7^  RX#			
LAST FILLED^65^13^LAST FILLED			
'PPP UNRESOLVED DOM' List Template...			
PPP UNRESOLVED DOM^1^^^6^16^1^1^Domains^PPP (MENU) DOM^Edit Domain Entries^1			
'PPP VISITS' List Template...			
PPP VISITS^1^^^6^16^1^1^Facilities^PPP (MENU) VISITS^Other Facilities Visited^1			
'PPP XREF EDIT' List Template...			
PPP XREF EDIT^1^^^6^16^1^1^Entry^PPP (MENU) FF XREF^PPP V1.0 Add/Edit DATA^1			
Purge entries in PPP LOG file: 			
Enter yes to purge out entries in file.			
RETAINED LAST 			
PPP LOG file unchanged			
LOG1_PPPPURG			
PURGING= 			
Purge entries in PPP FOREIGN FACILITY XREF file: 			
PPP FOREIGN FACILITY XREF file unchanged			
XREF1_PPPPURG			
QUEUE JOBS TO RUN AT WHAT TIME: 			
Try again later			
PPP PURGE LOGFILE DATA			
PPP PURGE FORIEGN FACILITY XREF			
XREFSCAN_PPPSCN1			
The following status were found while running XREFSCAN for last PDX batch			
Last Batch Request Date Not Found			
PPP - Nightly PDX Result Scan			
NOTHING RETURNED			
PDX Status For 			
FFSCAN_PPPSCN2			
The following Errors occurred while attempting to send PDX's:			
TOTAL ENTRIES = 			
Error From PPPPDX1 ==> 			
TOTAL PDX'S REQUESTED = 			
No Errors occurred while attempting to send PDX's			
PPP DAILY BATCH 			
>>> Beginning Post Init Process			
>>> Installing protocols for use by the list processor			
>>> Installing list templates for use by list processor			
>>> Setting up Prescription Practices mail groups			
    'PRESCRIPTION PRACTICES'... mail group created			
   Error...Creating 'PRESCRIPTION PRACTICES' mail group, Post init HALTED			
>>> Test sites will receive special instructions to convert data			
>>> The building of the PPP FOREIGN FACILITY XREF needs to be			
    scheduled at this time.  See Build/Rebuild Other Facility			
    Xref option off [PPP MAIN].			
>>> Post init process completed			
>>> Setting Up PPP Parameter File...			
Error Initializing PARAMETER File.			
>>> Setting Up Station Vs. Domain Cross-Reference...			
This routine will DELETE your existing PPP DOMAIN XREF file			
(if it exists) and then create it using your current DOMAIN file.			
>>> Loading PPP Domain Cross-reference...			
PPP DOMAIN XREF^1020.8P^^			
Station Number missing for 			
Filing Station 			
...(Station # not in INSTITUTION file)			
>>> Please Add Users To Mail Group...			
3///Used to alert users of problems encountered with the Prescription Practices Utilities.			
>>> Please add Users to the Prescription Practices Mail Group...			
Select Member			
Used to notify users of problems encountered with the Prescription Practices Utilities			
Mail group created..entry number = 			
- Cross-reference added to field 			
) of file 			
>>> Changing Set  statement in AD Xref of ^DPT, field SSN to call PPPFMX			
>>> Changing Kill statement in AD Xref of ^DPT, field SSN to call PPPFMX			
Error... AD Xref of ^DPT, field SSN is required			
Call ISC SUPPORT for assistance			
>>> Checking for required packages			
ERROR... MAS Version 5.3 is required for PPP v1.0			
ERROR... Outpatient PHARMACY Version 6.0 is required for PPP v1.0			
 - Outpatient PHARMACY v6.0 (OK)			
ERROR... PDX Version 1.5 is required for PPP v1.0			
ERROR... MPD v1.0 is required for PPP v1.0			
>>> The PPP cross reference will be added in a partial init of the			
    VAQ - TRANSACTION file on field .02 (Current Status).			
>>> Removing 'A1AY' cross reference from VAQ TRANSACTION file.			
>>> Removing 'A1AY2' cross reference from VAQ TRANSACTION file.			
DATE/TIME:			
USER:			
ROUTINE  :			
Date Initialized...................... 			
Total PDX's Sent...................... 			
Total Alerts Issued................... 			
Total Alerts Ignored.................. 			
Total Manual Entries Added............ 			
Total Entries Deleted................. 			
Total Entries Edited.................. 			
Total New Patients Added.............. 			
Total Profiles Viewed................. 			
Enter a date			
Enter 'return' to continue or '^' to exit.			
Enter 'Y' for yes, 'N' for no.			
   Enter year only!			
   Enter month and year only!			
PRCC=$G(			
PRCB))			
PRCD=$P($G(			
PRCB)),			
ZTSAVE(			
Package is defined, but has not current version data.			
Please call IRM!			
Warning: Selected Fund Control Point has a single year fund with multi-appropriation set up.			
Enter a year in the following sequence of years.			
Obligation/Common Number: 			
Select Transaction Type			
 NOT found!			
FMS Document: 			
Created: 			
A IFCAP-Wide Parameters			
SO 2 AR Date			
SO.E			
SEND TO FMS AS AN: 			
POST AGAINST AN FMS: 			
Now searching for temporary transactions with missing 'Form Type'.			
The following transaction(s) require a valid 'Form Type':			
Search complete.			
 temporary transactions are missing 'Form Type' entries.			
IFCAP PRE-INIT STARTS at 			
PRCO EDI RE-TRAN^PRCHPC PO			
PRCHPM CS RETRANSMIT BATCH^PRCHPM CS TRANSMISSION MENU			
ERROR TRAP! CALL IRM/ISC SUPPORT.			
IFCAP PRE-INIT ENDS at			
IFCAP POST-INITIALIZATION STARTS at 			
IFCAP POST-INITIALIZATION ENDS at 			
IFCAP V5 INSTALLATION 'Option 2' STARTS at 			
Print FCP ACCOUNTING ELEMENTS LIST			
Ask Fiscal Service to check the FCP ACCOUNTING ELEMENTS LIST for each Fund Control Point with the Cross-walk Table.			
Your Accounting Elements should match your Cross-walk Table.			
Note: You can not run Option 3 or 4 if your site has an active SUPPLY FUND Control Point but the FCP Accounting Elements are missing or incorrect.			
You also can not run Option 3 or 4 if you have an active GPF Control Point and your FCP Accounting Elements List does not show a 'GPF FMS CONVERSION' Fund Control Point.			
IFCAP V5 INSTALLATION 'Option 2' ENDS at 			
IFCAP V5 INSTALLATION 'Option 3' STARTS at 			
Print SNAP SHOT FCP BALANCE			
FCP BAL			
IFCAP V5 INSTALLATION 'Option 3' ENDS at 			
IFCAP V5 INSTALLATION 'Option 4' STARTS at 			
IFCAP V5 INSTALLATION 'Option 4' ENDS at 			
This is the last installation option you just finished.			
Check file 442 conversion task is running.			
IFCAP V5 FILE 442 CONVERSION SUBMITTED TO TASK MANAGER AT 			
IFCAP V5 FILE 442 CONVERSION HAS TASK NUMBER 			
IFCAP V5 file 442 conversion done. Total FMS documents = 			
IFCAP V5 FILE 442 CONVERSION DONE^IFCAP V5 Installer			
POST INITIAL: Move name (.01) to ald (5) for file 420.3			
POST INITIAL: Process FMS FND-DOCUMENT			
POST INITIAL: Process FMS FND-DOCUMENT done!			
POST INITIAL: Process FMS PCL-DOCUMENT			
POST INITIAL: Process FMS PCL-DOCUMENT done!			
POST INITIAL: Process FMS CPF-DOCUMENT			
POST INITIAL: Process FMS CPF-DOCUMENT done!			
GPFS FMS CONVERSION			
 GPFS FMS CONVERSION			
POST INITIAL: Process FMS PAC-DOCUMENT			
POST INITIAL: Process FMS PAC-DOCUMENT done!			
POST INITIAL: DEACTIVATE SUBCOSTCENT STARTS at 			
POST INITIAL: DEACTIVATE SUBCOSTCENT ENDS at 			
POST INITIAL: Process FMS SUB-DOCUMENT at 			
POST INITIAL: Process FMS SUB-DOCUMENT done!			
This task is going to send all active purchase orders dated			
after 12/31/1988 to FMS with F.O.B. data only.			
Please schedule this task one day before your site IFCAP V5 INSTALLATION			
Submit to the Task Manager fails, try later!			
 assigned with schedule date/time: 			
START SENDING P.O. AND F.O.B TO FMS			
FOB TOTAL RECORD SENT: 			
END SENDING P.O. AND F.O.B			
TOTAL IFCAP V5 FOB RECORDS SENT TO FMS: 			
IFCAP V5 INSTALLATION FOB RECORD COUNT^TASK MANAGER			
IFCAP V5 FOB DOCUMENTS			
IFCAP V5 INSTALLATION			
XXX@Q-FMZ.VA.GOV			
IFCAP/FMS AAF MESSAGE IS IN INVALID FORMAT.			
PLEASE CALL FMS-CONVERSION TEAM USER TO RESEND THIS MESSAGE:			
 WITH IFCAP ERROR: 			
CTL-			
IFCAP/FMS CONVERSION ERROR MESSAGE-AAF^IFCAP FMS MESSAGE SERVER			
IFCAP/FMS CONVERSION MESSAGE 			
 PROCESS FAILS			
IFCAP/FMS COPY ERROR MESSAGE-AAF^IFCAP FMS MESSAGE SERVER			
 PROCESSING DONE.			
IFCAP/FMS PROCESS DONE MESSAGE-AAF^IFCAP FMS MESSAGE SERVER			
CONVERT POSTED ISSUE BOOK BALANCE FOR IFCAP V5 INSTALLATION QUARTER WITH V4 RECORDS ONLY			
For IFCAP v4 -> v5 Installation Date			
CONVERT POSTED ISSUE BOOK REQUEST FOR 			
ISSUE BOOK			
ISSUE BOOK form type code is not 5 in file 410.5			
Issue Book complete status is not in file 442.3			
ISSUE BOOK CONVERTING FOR OLD IFCAP V4 RECORDS STARTS			
 Any IB transactions followed by a printed message 'IB obligation #/amount...'			
were not converted because the Obligation Data was not entered for these IBs.			
  IB obligation #/amount not entered by using OBLIGATION DATA option in v4			
Canteen, not processed			
     Warehouse is not defined for this station			
IFCAP V5 RECONVERT FND/CPF-DOCUMENT STARTS at 			
IFCAP V5 RECONVERT FND/CPF-DOCUMENT ENDS at 			
The above 'station-fcp' GENERAL POST fund control points have active status and the dummy 'GPFS FMS CONVERSION' has no ACCOUNTING ELEMENTS			
The above 'station-fcp' SUPPLY FUND control points have active status and have  no ACCOUNTING ELEMENTS.			
You must correct this before you run option 3 or 4.			
DELETE CONVERSION MO/SO RECORD STARTS			
Conversion Original Entry			
Conversion Modification Entry			
DELETE CONVERSION MO/SO RECORD IN FILE 2100.1 DONE! AT 			
IFCAP ENVIRONMENT CHECK STARTS:			
IFCAP PACKAGE ENVIRONMENT CHECK DONE!			
IFCAP PACKAGE ENVIRONMENT CHECK FAILS:			
REINDEX SPECIAL CONTROL POINT INDEX 'AD' STARTS AT 			
REINDEX SPECIAL CONTROL POINT INDEX 'AD' ENDS AT 			
Your site must install IFCAP v5 before running this patch routine.			
If your site has substations and you are not a Conversion III site, run			
If your site has substations and you are a Conversion III site, run 			
If your site has no substations and you are a Conversion III site, run			
    DO NOT run ANY Options.			
Select IFCAP V5 option			
Submit the File 442 Conversion & Generating FMS Doc. to the TASK MANAGER			
 Substation Option			
Ready to run the selected option(s) '			
No substations are in file, use substation ENTER/EDIT to add first.			
NOTE: Please schedule this task with a date '10/14/95'.			
IFCAP V5 CALM CODE SHEET CONVERSION SUBMITTED TO TASK MANAGER AT 			
IFCAP V5 CALM CODE SHEET CONVERSION HAS TASK NUMBER 			
It is too early to run the CALM code sheet conversion.			
Please run after 10/13/95.			
Nothing in file. You must run this list after Option 3 has completed			
CALM CODE SHEET CONVERSION EXCEPTION LIST			
STATION # 			
ABORTED BY '^'!    			
ALL DONE!   			
    PURCHASE ORDER DATE: 			
Select 2237/1358 Request: 			
Select Purchase Order: 			
IFCAP V5 CALM CODE SHEET CONVERSION TOO EARLY^IFCAP V5 CALM CODE SHEETS CONVERSION USER			
Please run this CALM code sheet conversion after 10/13/95.			
IFCAP V5 calm code sheet conversion starts at 			
1////IFCAP V4 PO 1996 CALM CODE SHEET;2///^S X=			
IFCAP V5 CALM CODE SHEETS CONVERSION DONE^IFCAP V5 CALM CODE SHEETS CONVERSION USER			
IFCAP V5 CALM code sheets conversion done. Total FMS documents = 			
IFCAP V5 CALM code sheet conversion ends at 			
 - 1995 or earlier P.O. with Amendment, no FMS-doc generated.			
No entry found in File 442!!!			
Conversion III/CALM Code Sheet 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
