English	French	Notes	Complete/Exclude
This report will print all drugs marked for Outpatient use which are non-			
controlled substances and are not marked to transmit to CMOP.			
Outpatient Drugs Not Marked to Send To CMOP Report			
OUTPATIENT DRUGS NOT MARKED TO SEND TO CMOP			
DO NOT SEND			
CMOP Re-transmission 			
CONFIRMATION:			
ACKNOWLEDGEMENT:			
RE-TRANSMISSION 			
TRANSMISSION 			
  CMOP RE-TRANSMISSION 			
     Pharmacy Division    :  			
     Batch Number         :  			
     Transmitted by       :  			
     Total orders/Rx's    :  			
     Beginning order #    :  			
     Ending order #       :  			
     Original Batch #     :  			
 IS ON HOLD.			
 and has been sent to the automated system			
 and is on hold			
Please review these transmissions and take appropriate action.			
CMOP Acknowledgement			
CMOP Close Transmission			
CMOP Unhold Transmission			
CMOP Transmission Processed			
CMOP Data Transmission Error, 			
There was an error in the transmission of batch #			
Please contact the BIRMINGHAM ISC for assistance as soon as possible.			
Transmisssion Information			
Data collected at sending facility:			
Beginning msg #  			
Ending msg #     			
Total Rxs        			
Total orders     			
Data received at host facility:			
 It gives you a hard copy of the Outpatient drugs			
from your local drug file which are 			
 not been marked at all OR ones marked as 			
Do Not Transmit			
CMOP Local Drugs not Marked or Marked as NO Report			
LOCAL OUTPATIENT DRUGS WHICH ARE NOT MARKED AT ALL OR MARKED AS 			
DO NOT TRANSMIT			
QUANTITY DISPENSE MESSAGE			
Print Log on Device: 			
  not queued			
CMOP Interface Log			
WEST LA			
CMOP OPERATIONS^554^1^1			
Your Kernel Site Parameters File is missing the entry for the your CMOP mailman domain!  			
Please contact the Birmingham CIO Field Office!			
Unable to determine CMOP setup, contact the Birmingham ISC for assistance.			
CMOP SYSTEM^550I^1^1			
You do not have the PSX Resource device set up.			
Please read the CMOP Pre-Installation instructions for proper setup.			
CMOP MANAGERS			
The Mail Group CMOP MANAGERS must be set up and assigned at least one active user.			
Initialization complete!!			
CMOP SYSTEM^550I			
This install of the Consolidated Mail Outpatient Pharmacy			
software at your medical center requires that you select the CMOP Host			
Facility which will be receiving your Outpatient Pharmacy prescription data.			
Select the CMOP to RECEIVE YOUR DATA 			
Validating required RX CONSULT FILE entries......			
You must have Outpatient Pharmacy patch PSO*6*148 installed before installing CMOP Software.			
...INITIALIZATION ABORTED!			
You do not have an RX CONSULT FILE........INITIALIZATION ABORTED!			
Your RX CONSULT File entry # 			
 is invalid.!!			
INITIALIZATION ABORTED!			
CMOP SYSTEM			
Enter CMOP System:  			
Purge Status of CMOP Rx Queue			
 does not have any purge data to report.			
Date/Time of Last Purge:  			
Starting Message Number:  			
Ending Message Number  :  			
Total Orders Purged    :  			
Enter the date and time to start purge:  			
CMOP Background Purge for CMOP Database file			
CMOP PROCESSED MSG			
 has transmissions that are marked as processed that have data to go to the vendor.			
 all transmissions processed correctly.			
 marked as processed but has data to send to the vendor.			
QUERY # 			
MSH|^~\&|DHCP||			
SI BAKER			
DHCP STOPPED QUERY 			
No Response to Bid, DHCP terminated query.			
MSA|			
AA|			
AR|			
COMPLETED DATE			
NO CANCELLED REASON			
STX/EOT			
NTE|100			
QRY1 QRY message never received for query #			
QRY2 EOT received with no terminator while waiting for QRY message			
QRY3 EOT received while waiting for QRY message			
QRY5 Unexpected character received: 			
) while waiting for QRY message			
QRY6 Timeout Timer D reading QRY message			
QRY7 QRY message longer than 240 characters			
QRY8 QRY message did not end with ETX			
QRY9 QRY was null			
QRY10 Timeout reading QRY checksum			
QRY11 QRY checksum contained an invalid hex digit (			
QRY12 QRY checksum does not match			
QRY13 Message #			
 was rejected by OMCS			
QRY14 ENQ received with no terminator			
QRY15 MSA message ID did not match PSXQRYID # expected			
QRY16 Block count greater than 7.			
QRY17 Wrong Block count received.			
QRY18 Maximum retries reached for receiving message.			
QRY19 Maximum Rxs received, query terminated.			
QRY20 No activity on line continuing to monitor.			
The interface must be stopped in order to prioritize the queue!!			
********** Queue is empty. *********			
CMOP TRANSMISSION QUEUE			
Accept Sequence			
Yes - Download in FIFO sequence. No - Set a priority to download to the vendor.			
RECEIVED DATE			
ORDERS/RXS			
Press RETURN to start interface, 			
Reset to Original Sequence			
Enter priority			
Accept			
ENTER BEGINNING TRANSMISSION DATE 			
ENTER ENDING TRANSMISSION DATE 			
Ending date must follow beginning date!			
DIVNM(			
DIVDA(			
CMOP Activity Report			
Report Queued to Print!!			
                              Grand Total Summary			
FILLED IN 			
CMOP ACTIVITY REPORT			
names of divisions			
iens of divisions			
SELECTION OF DIVISION(S)			
Is this corrrect ? 			
There is a transmission in progress, try again later.			
Please wait, checking for data to send.			
CMOP TRAN			
A transmission build is in process, try again later			
 Transmission Recovery			
CMOP Recovery Message 			
CMOP Managers			
The last CMOP transmission did not complete properly. The data for this			
transmission will be sent to the CMOP during the next transmission for			
that division.			
If you have scheduled auto transmissions for CMOP, please check to see			
that they are still scheduled for the correct time.			
This message is just a notification that problems were detected with the last			
transmission and that the data will be sent to the CMOP facility for processing.			
Otherwise there is not anything that you need to do.			
Transmission:       			
Division:           			
CMOP Host:          			
Type:               			
Date/Time:          			
The prescriptions have been reset into CMOP suspense			
and this transmission has been closed			
Recovery			
CMOP Controlled Substances Transmission			
CS TRANSMISSION			
NTE|1|			
ORC|NW			
ORD#     PATIENT          RX#          FILL          DRUG NAME			
CMOP Review # 			
ENTER BEGINNING DATE:  			
ENTER ENDING DATE:  			
CMOP Rejected Messages Report			
There were no rejected messages for the date range selected: 			
CMOP Rejected Messages for Transmission # 			
Printed : 			
  REJECTED REASON:   			
This option will only release/complete Rx's which have labels printed manually.			
Enter 'R' to release a prescription that has been filled.			
Enter 'C' to mark a prescription as not filled.			
Enter Cancel Reason			
PREVIOUSLY RELEASED ON 			
 not dispensed.			
the number printed below the barcode.			
You have chosen 			
 CMOP to receive your transmissions.			
There is no Mailmain Domain entry for 			
. Please add this domain to   your system and re-run the CMOP installation. Discontinuing installation....			
CMOPH 2.0T5			
CMOP Prescription Resubmission Utility			
Enter the Rx # to resubmit			
Enter the prescription number you want to send back to the CMOP to be dispensed.			
 either does not exist or is an invalid #.			
There have been no CMOP transmissions for this Rx.  You can not Resubmit it!			
This Rx cannot be resubmitted.  A later fill has already been entered.			
This prescription has expired. You cannot resubmit it.			
This Rx has already been resubmitted the maximum allowable times. You cannot resubmit it.			
This Rx is not eligible for resubmission.			
The last fill must have a status of 'NOT DISPENSED'.			
The last fill has been returned as a duplicate.			
This RX is not eligible for resubmission.			
The fill # 			
 appears to have been canceled.			
You have chosen Rx # 			
 to be resubmitted to the CMOP.			
Enter Y if you want to send the selected prescription to the CMOP.			
This is not a CMOP Rx.  Make sure the last fill has a Mail routing, the drug is marked for CMOP, etc...			
  - Initiate CMOP Transmission will gather data for the selected date range and			
transmit to the CMOP.  The sender receives a 			
Transmission Confirmation			
via Mailman when the data transmission is completed.			
  - Print CMOP Labels from Suspense will gather data for the selected date range			
and print the labels.  NO DATA will TRANSMIT to the CMOP.  Drugs or items for			
all labels printed should be filled locally.			
5 - Standard Print from Suspense will print all labels for Rx's NOT 'Queued to			
Send' for the selected date range.  All usual outpatient prompts will be displayed.			
1 - Reset and Transmit to CMOP will reset entries which have 'printed but not			
transmitted for the selected date range and automatically transmit data			
to the CMOP.  			
2 - Reset and Print CMOP Labels will reset entries which have 'printed but not			
transmitted' for the selected date range and print labels.  There will be			
NO DATA TRANSMITTED to the CMOP.   The Rx's for the labels printed must be			
filled locally.			
3 - Standard Reset and Print Again will reset and print all outpatient labels not			
'Queued to Send' and usual outpatient prompts will be displayed.			
WARNING:  There are Rx's currently suspended for CMOP.			
If you inactivate CMOP processing:			
1)  These Rx's will not transmit to the CMOP, but will remain			
    in the RX SUSPENSE file.  These Rx's cannot be accessed by			
    Outpatient Pharmacy options.  Ideally, these Rx's should			
    be transmitted or printed before inactivation takes place.			
    If CMOP processing is activated, these prescriptions can			
    be transmitted.			
Before inactivating, please have all pharmacy users sign			
    off until inactivation is complete.  CMOP Rx's input by			
    users who do not sign off the system will be suspended for			
    CMOP transmission.			
  These Rx's can not be accessed by			
    Outpatient Pharmacy options.  If CMOP processing is			
    activated these prescriptions can be transmitted.			
Your current auto transmission schedule will be			
    cancelled on inactivation.			
Prescriptions 			
will be processed into			
are in			
 CMOP suspense and			
held until either:			
1. CMOP transmissions are activated.			
2. Outpatient menues are used to pull prescriptions from			
CMOP suspense.			
PRINTER 'LABEL' DEVICE:  			
You must select a printer!			
CMOP Suspense Label 			
Reprinted			
CMOP Suspense Label Printed			
PSXERR 			
CMOP Error 			
CS CMOP Print Local encountered the following error. Please investigate			
Division:         			
Type/Batch        			
Error:            			
This batch has been set to closed.			
Call NVS to investigate which prescriptions have been printed and which are yet to print.			
A copy of file 550.1 can be found in ^XTMP(			
Select (1, 2, 3):  			
  1 - Reset CMOP Batches for Transmission			
  2 - Reprint CMOP Batches			
  3 - Standard Reprint Batches from Suspense			
No - Exits.			
Yes - Transmits data to the CMOP.			
Yes - Prints labels.			
There is another job in process, please try again later.			
RESET and TRANSMIT CMOP DATA			
RESET and REPRINT CMOP LABELS			
**** Date Selection ****			
   BEGIN DATE:  			
   ENDING DATE:  			
Begin Date must be before Ending Date!			
Nothing to Transmit.			
Nothing to Reprint.			
DO YOU WISH TO TRANSMIT TO THE CMOP NOW			
No - Exits the option.			
Yes - Transmits to the CMOP.			
DO YOU WISH REPRINT CMOP LABELS NOW			
Yes - Reprints CMOP labels.			
TRANSMISSIONS 			
CMOP Transmission Report Summary			
Enter Begin Date for Report:  			
Enter End Date for Report:  			
Beginning date must be before ending date.			
NO DEVICE SELECTED			
Another report			
No data for the report.			
S - Provides a report of all transmissions received for the date range entered.			
Q - Provides a report of all transmissions that are queued to download to the			
vendor for the date range entered.			
P - Provides a report of all transmissions that are processed for the date range			
C - Provides a report of all transmissions that are closed for the date range			
H - Provides a report of all transmissions that are on hold status for the date range entered.			
L - Provides a report of all transmissions that were printed for the date range entered.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
