English	French	Notes	Complete/Exclude
     DEPENDENT ENTRY COUNT ---FOR ENCOUNTER 			
Press any key to return to the menu			
This routine can only be run buy someone who is			
AUTHORIZED to be in progammer mode. If you run			
the routine, 'D ^PXQGRLT' ,it will error out when			
the mazimum length is reached.			
Look at a BROKER POINTER to a visit? (Y/N): N// 			
Enter Visit IEN: 			
Select a Display			
** NO CROSS-REFERENCE IN FILE#2 ON SSN FIELD FOR UPDATING FILE#9000001**			
** CROSS-REFERENCE COMES WITH PATIENT/IHS SUBSET PACKAGE**			
Compare of #2 and # 9000001 Patient files			
      Zero Nodes MATCH			
      Zero Nodes DO NOT Match			
Patients in file #2 but not in #9000001			
 DFN         NAME                  SSN			
**There are more that 100 of these so I'll quit with 100**			
Patients in file #9000001 but not in #2			
SSN'S in #2 not equal to #9000001			
 DFN        NAME                   #2        #9000001			
PATIENT file #2 and PATIENT/IHS file #9000001 are in sync.			
Compare of #4 and # 9999999.06 location files			
Locations in file #4 but not in #9999999.06			
 IEN         NAME			
Locations in file #9999999.06 but not in #4			
INSTITUTION file #4 and LOCATION file #9999999.06 are in sync.			
 NO VISIT IEN TO FOLLOW 			
Enter '^' to exit			
Select by (P)atient or (I)en			
Look at a Possible BROKER POINTER to a visit? (Y/N): N// 			
To Customize your display use VA Fileman to add entries in file			
PCE CUSTOMIZE REPORT, with your NAME, FILE/SUBFILE#s, and FIELD#s			
that you want to have included in the report.			
Enter '^^' to exit option			
Format of Print out			
         The Following is the VISIT file entry and			
          ALL records pointing back to this entry.			
               VISIT RECORD    --- #			
       The Following is the OUTPATIENT ENCOUNTER entry and			
            most of the records pointing back to it.			
             OUTPATIENT ENCOUNTER --- #			
       The Following is the SCHEDULING VISITS file.			
      This is where Scheduling stores the CPT codes.			
ENTER to continue			
      END OF DISPLAY			
Enter VISIT (UNIQUE ID or `1239)			
Enter ENCOUNTER (`2344)			
CREATED :  			
EDITED  :  			
USER    :  			
OPTION  :  			
PROTOCOL:  			
PACKAGE :  			
SOURCE  :  			
STOP CODE 			
THERE ARE PROCEDURES IN PCE BUT NO RECORD IN SCHEDULING **			
FILE = 			
(word-processing field)			
(not displayable-look up entry)			
PXQUTL2-START			
Enter Starting Date (eg. T-4) : 			
PXQUTL2-END			
Enter Ending Date : 			
Starting Date cannot be before Ending date			
                  NOTES CONCERNING THIS OPTION			
   These options will check for broken cross-references in all of			
           the PCE visit files. It is interactive.			
 'S' will go through ONLY the 'B' X-REF of each file looking for problems.			
         To EXIT the program, you can enter an '^' at any prompt.			
  At about 1 minute intervals a message will come up telling you			
               how much work has already been done.			
Which file do you need to fix 			
Checking the V PROVIDER FILE #9000010.06			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVPRV(			
Checking the V POV FILE #9000010.07 (PROCEDURES)			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVPOV(			
Checking the V CPT FILE #9000010.18 (PROCEDURES)			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVCPT(			
Should I fix this one by removing the reference ??  			
KILL 			
By saying YES to this prompt, you will eliminate being asked			
over and over again, 'Should I fix this one by removing the reference ??'			
Eliminate Prompting for Confirmation?  			
The 'OTHER' 6 V-files are:			
V IMMUNIZATION   file#9000010.11			
V SKIN TEST      file#9000010.12			
V EXAM           file#9000010.13			
V TREATMENT      file#9000010.15			
V PATIENT ED     file#9000010.16			
V HEALTH FACTOR  file#9000010.23			
Checking the VISIT FILE #9000010 (VISITS)			
Checking the ^AUPNVSIT(			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVSIT(			
Screening the V provider file			
Screening the V POV file (IDAGNOSIS)			
Screening the V CPT file (PROCEDURES)			
Screening the VISIT file			
Select a VISIT Cross-reference: 			
Checking the V IMMUNIZATION FILE #9000010.11 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVIMM(			
Checking the V SKIN TEST FILE #9000010.12 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVSK(			
Checking the V EXAM FILE #9000010.13 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVXAM(			
V SKIN TEST			
V PATIENT ED			
V HEALTH FACTOR			
Rebuilding 'AA' Cross-References on the V PATIENT EDUCATION File.			
This might take a few minutes!			
Checking the V TREATMENT FILE #9000010.15 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVTRT(			
Checking the V PATIENT ED FILE #9000010.16 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVPED(			
Checking the V HEALTH FACTOR FILE #9000010.23 			
 IS NOT THERE! BAD REFERENCE IS ^AUPNVHF(			
PCE DEBUGGING UTILITIES DEPENDENT ENTRY COUNTS			
Task number is 			
PCE DEBUGGING UTILITIES EXPANDED DEPENDENT ENTRY COUNTS			
PCE DEBUGGING UTILITIES INTERNAL VIEW OF VISITS			
PCE DEBUGGING UTILITIES SOURCE OF THE PCE DATA			
PCE DEBUGGING UTILITIES VISIT IEN-DEPENDENT ENTRIES			
PCE DEBUGGING UTILITIES VISIT IEN-EXPANDED			
PCE DEBUGGING UTILITIES VISIT IEN-SOURCE			
PCE DEBUGGING UTILITIES VISIT IEN-ALL			
PCE DEBUGGING UTILITIES ENCOUNTER IEN-DEPENDENT ENTRIES			
PCE DEBUGGING UTILITIES ENCOUNTER IEN-EXPANDED			
PCE DEBUGGING UTILITIES ENCOUNTER IEN-SOURCE			
PCE DEBUGGING UTILITIES ENOCUNTER IEN-ALL			
PCE DEBUGGING UTILITIES PCE/VISIT PARAMETERS SETUP			
PCE DEBUGGING UTILITIES PATIENT FILES			
PCE DEBUGGING UTILITIES LOCATION FILES			
PCE DEBUGGING UTILITIES USER VISIT REVIEW			
VREC(			
PXS,$J,SKIN,InvDt,IFN,0) = SKIN TEST [E;.01]			
PXE,$J,EXAM,InvDt,IFN,0) = EXAM [E;.01]			
PXT,$J,InvDt,TREAT,IFN,0) = TREATMENT [E;.01]			
PXF,$J,HFC,HF,InvDt,IFN,0) = Health Factor [E;.01]			
NO REMINDER			
ITEM 			
 IS NOT A VALID REMINDER ITEM			
The reminder 			
 was inactivated 			
NO PAT			
 IS NOT A VALID PATIENT			
NO LOCK			
Patient is the wrong sex!			
EXPANDED TAXONOMY			
NO LOCK for ien 			
PATIENT AGE			
REMINDER NAME			
 for ages 			
 and older			
 and younger			
 for all ages			
 - Not Indicated			
AGE OVERLAP			
Could not get lock for expanded taxonomy 			
 try again later.			
Reminder Categories			
REMINDER CATEGORY NAME:			
Category Description:			
Sub-category:			
Further levels			
Sequence: 			
PXRMD(811.4,			
 Computed Finding: 			
CF 			
Only those with programmer's access can perform this function.			
Select Reminder Computed Finding: 			
VA-			
Sub-category: 			
REMINDER CATEGORY LIST			
  Sequence number already used 			
The high code must be equal to or higher than the low code			
Did you mean 			
PLEASE ENTER A UNIQUE NAME			
 is not a unique name!			
Do you want to edit it now			
The original 			
 has been copied into 			
Select the reminder item to copy: 			
Select the taxonomy item to copy: 			
reminder term			
Select the reminder term to copy: 			
New entry not created due to invalid name!			
EDIT HISTORY			
WP(1,1)			
Copied from 			
Finding Inactive Codes in Dialog file			
Select Codes or All of the codes or 			
This option is use to evaluate the various codes			
used in the reminder dialogs as Finding Items and			
Additonal Finding Items. It will report by mail message			
which codes are now inactive or are set to become			
in the future.			
Select a code set to be evaluated			
Check Mail for results.....			
Reminder Dialog 			
ICD9 AND CPT			
 Code changes			
    Found in: 			
CPT and/or ICD9			
Review of inactive codes as of 			
There was a 			
 code set update on 			
     Used by: 			
Clinical Reminders CPT code set update			
Clinical Reminders ICD code set update			
Selectable ICD9 code 			
 is inactive.			
 will be inactive within 180 days.			
Selectable CPT code 			
 will be inactive with 180 days.			
Adjacent 			
 codes have changed for the range defined by:			
 Low code  			
 High code 			
  Old adjacent lower code 			
  New adjacent lower code 			
  No change in adjacent lower code			
  Old adjacent higher code 			
  New adjacent higher code 			
  No change in adjacent higher code			
an ICD			
There was 			
This could affect adjacent codes and/or taxonomy expansions.			
Please review the affected taxonomies and take appropriate action.			
You can get the full details of a taxonomy using the taxonomy inquiry option.			
TAX 			
 has file 			
Clinical Reminder taxonomy updates, new 			
 global installation.			
The following are new 			
 codes in the expansion for this taxonomy:			
Taxonomy: 			
Future			
Past			
Incomplete reminder definition see the Clinical Reminder coordinator.			
No reminder frequency - cannot compute due date!			
Warning no do in advance time			
DUE SOON			
NO DAY			
Encounter date missing day, using the first for the date due calculation.			
NO MONTH			
Encounter date missing month, using January for the date due calculation.			
Building dialog  - 			
PXRMD(811.5,			
Finding item dialog 			
POV 			
Dialog build complete			
Unable to update dialog file : 			
Error in UPDATE^DIE, needs further investigation			
Autogenerated			
PXRM 			
 RESULT GROUP			
 (Mental Health Instrument)			
Dialog Elements			
Reminder Dialog			
WPTXT(			
DISABLED AT AUTO GENERATE			
GENERATE DIALOG AUTOMATICALLY: 			
Enter Y or N. For detailed help type ??			
SELECT REMINDER TO GENERATE DIALOG FROM: 			
You must select a reminder!			
ENTER A UNIQUE DIALOG NAME			
Select a unique name for the generated dialog.			
 name cannot contain quotes!			
Associated Dialogs:			
ENABLE DIALOG: 			
LINK DIALOG TO REMINDER: 			
OVERWRITE EXISTING REMINDER DIALOG 			
REPLACE ANY EXISTING DIALOG ELEMENTS			
Enter Yes to generate reminder dialog automatically for a			
selected reminder. Enter No to create a reminder dialog			
using the standard fileman edit.			
Enter Yes to replace the existing reminder dialog.			
Enter No to return and enter an alternative dialog name.			
For each FINDING ITEM on the reminder a dialog element			
will be created. A separate DIALOG ELEMENT is created for			
each enabled RESOLUTION STATUS in the FINDING TYPE			
PARAMETERS for this finding type. The dialog element is			
unique for finding type, finding item name and resolution			
status name.			
e.g. VM WEIGHT DONE will be generated for the finding item			
     vitals measurement/weight.			
Enter Yes to rebuild all dialog elements used by this			
reminder overwriting any existing modifications.			
Enter No to use existing dialog elements if they exist.			
New dialog elements will be created if they don't already			
Enter Yes to create a dialog enabled for use in CPRS.			
Enter No to create a dialog disabled for CPRS.			
If the source reminder is not linked to any other dialog			
enter Yes to link the reminder to the generated dialog.			
Enter No if no link should be made.			
Enter the name of the dialog. The default is the reminder			
name. If the name of an existing dialog is specified the			
option to override the existing dialog will be given.			
Select the dialog to copy: 			
Change the new prompt into a forced value :			
ENTER A UNIQUE NAME			
 name cannot begin with PXRM!			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
