English	French	Notes	Complete/Exclude
Contacts 			
by Division Spreadsheet Report			
Issues 			
Site is not multi-divisional for Patient Representative - no report created.			
Service/Discipline 			
Patient Rep Service Report			
This option will allow the user to open, close, or delete			
a Patient Representative Contact record			
Reports of Contact cannot be resolved without Issue Code(s).			
for each Issue Code.			
SURE YOU WANT TO DELETE THE ENTIRE *			
* CONSUMER CONTACT			
Code not found. Try again			
     Must be on or after the contact date: 			
     and not later than: 			
Select ALL Divisions? 			
Enter Division: 			
QAM 			
Enter the fields you wish to sort on. 			
Maximum of two sort fields reached!!			
Select next field to sort on. 			
Maximum two sort fields allowed.			
* indicates already selected.			
Sort selection #			
Exiting without a report.			
Enter the fields you wish to print.			
Maximum of four print fields reached!!			
Select next field to print on. 			
Maximum four print fields allowed. 			
Print selection # 			
Select DATA ELEMENT: 			
QAM ELEMENT			
You have previously chosen `			
' to print. 			
' to sort on. 			
Enter a number between 1 - 			
You have not selected any sort or print data.			
Do you wish to exit the program			
 for Yes, 			
 for No 			
Enter the beginning and ending values for PATIENT NAME.			
Start with: First// 			
Names must start in uppercase, with or without a comma. Between 1-30 characters long.			
End with: Last// 			
The beginning name must fall before the ending name in the alphabet.			
QAM PAT			
Monitors must start in alphanumerics. Between 1-30 characters long.			
The beginning Monitor must fall before the ending Monitor.			
QAM MON			
Enter the special report header, if desired (maximum 55 characters): 			
Exceeds 55 characters!! 			
Enter the special report header. 			
AD HOC FALL OUT REPORT			
Generate Fall-Out reports.			
Request queued!			
Request cancelled!			
QAM DATE			
QAM DLMNT			
HEAD(0)			
PARRY(			
PARRAY(			
SARRY(			
SARRAY(			
QAM IEN			
QAM SUB			
Monitor:      			
Event Date:   			
Creation Date: 			
QAM TEMP			
The 'Start with' date must fall before the 'End with' date.			
The 'Start with' number must fall before the 'End with' number.			
The 'Start with' value must fall before the 'End with' value in the alphabet.			
Clinical Monitoring System			
Monitor Code			
Monitor Title			
Standard of Care			
Clinical Indicator			
Rationale			
Explain Rationale			
Auto Enroll Monitor			
Monitor Status			
On/Off Switch			
Condition			
Time Frame			
Min Samp/Alert Lev			
Threshold			
Hi/Lo Percent			
Daily Fall Out List			
Threshold Met Bulletin			
End Of Time Frame Bulletin			
Min Samp/Alert Lev Met Bulletin			
Bulletin Mail Group			
Mail Group Desc			
Mail Group Menber			
Allow Duplicate Fall Outs			
Other Data To Capture			
*  This option DELETES selected data from the Monitor History file  *			
*       Once the data has been deleted it CANNOT BE RECOVERED       *			
*     This option DELETES selected data from the Fall Out file     *			
*      Once the data has been deleted it CANNOT BE RECOVERED       *			
*          Once the data has been deleted it CANNOT BE RECOVERED          *			
Ready to DELETE, are you sure			
Enter Y(es) to delete the selected data, or			
Enter N(o) to exit without deleting the data			
Select the monitors to delete.			
QAM MONITOR			
Select the date range to delete.			
QAM*			
QAQ*			
Purge the 			
MONITOR HISTORY			
FALL OUT			
AUTO ENROLL RUN DATES			
QAM CONDITION			
QAM FALL OUT			
QAM SAMPLE			
QAM SERVICE			
QAM MONITOR TOOL 1			
QAM MONITOR TOOL 2			
CLINICAL MONITORING SYSTEM			
Division by zero!			
AUTO ENROLLED FALL OUT			
Zero fall outs for the 			
Total number of Fall Outs is: 			
Fall Out sample size is: 			
Percent Fall Out: 			
DAILY FALL OUT REPORT			
*** Monitor data not found ***			
CODE: 			
*    Auto enroll has found important site parameters to be missing    *			
*  Use the 'Site Parameters Edit' option to enter the necessary data  *			
Want to run auto enroll for specific monitors			
*** No monitors selected ***			
Want to run auto enroll for specific services			
*** No services selected ***			
Enter the date range you want auto enroll to scan			
*** Start and end dates must be T-1 or earlier ***			
Queue auto enroll to run at: 			
Queueing time must be between 			
Queueing auto enroll, please wait			
Want a report of the dates when auto enroll will run			
Rerun auto enroll for a given date range			
Manually queued auto enroll run dates report			
MANUALLY QUEUED AUTO ENROLL RUN DATES			
QUEUED TO RUN			
TASK NUMBER			
LOWER AGE LIMIT			
UPPER AGE LIMIT			
LOOK BACK DAYS			
Enter the number of days the condition should 'look back'.			
While trying to find a fall out for this monitor.			
Press 'RETURN' for ALL ward locations.			
Enter a GROUP name that contains MAS ward locations.			
ENTER THE TYPE OF DATE			
   0     AUTO ENROLL DATE			
   1     DISCHARGE DATE			
Enter the date you wish to be			
associated with this condition.			
Enter a 'RETURN' for the AUTO ENROLL DATE.			
TREATING SPECIALTY GROUP: 			
Press 'RETURN' for ALL treating specialties.			
Enter a GROUP name that contains a MAS treating specialty.			
0   AUTO ENROLL DATE			
MOVEMENT TYPE GROUP: 			
Press 'RETURN' for ALL MAS movement types.			
Enter a GROUP name that contains MAS movement type.			
DAYS BETWEEN DISCHARGE AND ADMISSION			
Enter the number of QAMDAYS between the patient's last discharge			
and current admission.			
Enter a GROUP name that contains MAS treating specialties,			
or press 'RETURN' for all treating specialties.			
or press 'RETURN' for all ward locations.			
  2  APPLICATION WITHOUT EXAM			
Choose any or all that you wish to monitor, e.g. 0,1 or 0-2, etc.			
Press RETURN for all status types.			
  3  OUTPATIENT MEDICAL			
  4  OUTPATIENT DENTAL			
  5  NURSING HOME CARE			
Press RETURN for all benefit types.			
TYPE OF CARE APPLIED FOR			
  2  PLASTIC SURGERY			
  5  ALL OTHER			
Press RETURN for all care types.			
DISPOSITION GROUP: 			
Enter a GROUP name that contains MAS disposition types.			
press 'RETURN' for all disposition types.			
CLINIC GROUP: 			
Enter a GROUP name that contains MAS clinics.			
Press 'RETURN' for all clinics.			
  2  C    CANCELLED BY CLINIC			
  3  NA   NO-SHOW & AUTO RE-BOOK			
  4  CA   CANCELLED BY CLINIC & AUTO RE-BOOK			
  5  I    INPATIENT APPOINTMENT			
  6  PC   CANCELLED BY PATIENT			
  7  PCA  CANCELLED BY PATIENT & AUTO RE-BOOK			
  3  SCHEDULED VISIT			
  4  UNSCHEDULED VISIT			
Press RETURN for all purpose of visit types.			
APPOINTMENT TYPE GROUP: 			
Enter a GROUP name that contains MAS appointment types.			
Press 'RETURN' for all appointment types.			
while trying to find a fall out for this monitor.			
COUNT SAMPLE SIZE BY			
Choose one or more of the following:			
   2  Transfers to (interward)			
   4  # in-house at beginning of time frame			
   5  # in-house at ending of time frame			
Enter your selections separated by commas, e.g., 1,4			
   3  # in-house at ending of time frame			
Select one of the codes listed.			
PATIENT TYPE LIST			
  3  ALL PATIENTS			
WARNING: NUMBER 3 WILL SELECT EVERY PATIENT IN DHCP !!			
Press RETURN for INPATIENTS and OUTPATIENTS.			
SERVICE/SECTION GROUP: 			
Enter a GROUP name that contains MAS service/sections,			
or press 'RETURN' for all service/sections.			
QAMLRDAT=			
LAB TEST: 			
Enter the name of an individual lab test whose result you want to monitor.			
STARTING VALUE 			
ENDING VALUE 			
*** Ending value must be greater than or equal to the starting value ***			
ICD DIAGNOSIS GROUP: 			
Enter a GROUP name that contains ICD diagnoses.			
press 'RETURN' for all ICD diagnoses.			
ICD PROCEDURE GROUP: 			
Enter a GROUP name that contains ICD procedures.			
press 'RETURN' for all ICD procedures.			
HOSPITAL LOCATION GROUP: 			
Enter a GROUP name that contains MAS hospital locations.			
Press 'RETURN' for all hospital locations.			
SECLUSION/RESTRAINT TYPE GROUP: 			
Enter a GROUP name that contains types of seclusion or restraints.			
Press 'RETURN' for all types of seclusion and restraints.			
REASON FOR S/R GROUP: 			
Enter a GROUP name that contains reasons for seclusion/restraint.			
Press 'RETURN' for all reasons.			
MAXIMUM TIME IN S/R (HOURS)			
Enter the maximum number of hours the patient may be held			
in seclusion/restraint.  Patients in S/R for more than			
this amount of time will be captured.			
Enter a number from 1 to 96.			
DRUG CLASS GROUP: 			
Enter the DRUG CLASS group you wish to monitor.  All 'TODAY-1'			
fills will be scanned for duplicate fills for this group.			
PATIENT GROUP: 			
Enter the PATIENT GROUP you wish to monitor.			
LAST DIGIT(S) OF SSN			
MAS MOVEMENT TRANSACTION TYPE: 			
Enter the MAS transaction type of interest.			
 TYPE GROUP: 			
Enter a GROUP name that contains MAS 			
 movement types			
Enter a MAS 			
 movement type GROUP, or			
press 'RETURN' for all 			
Enter the LOS from the date of the patient's admission.			
Enter the length of stay from 1-365 days.			
a treating specialty.			
Enter the treating specialty length of stay from 1-365 days.			
press 'RETURN' for all treating specialties.			
Enter the ward length of stay from 1-365 days.			
press 'RETURN' for all ward locations.			
FALL OUT MONITOR: 			
Enter the monitor you want this condition to scan.			
   1     FALL OUT DATE			
Select MONITOR TO COPY: 			
Copy of 			
' already exists! ***			
Are you sure you want to copy this monitor			
Answering Y(es) produces a duplicate copy of the selected monitor			
which you may then edit.  Answering N(o) takes you back to the			
previous prompt.			
Copying monitor, please wait...			
;7///UNDER CONSTRUCTION;54///OFF			
You may now edit the copy of the monitor, please change the CODE and TITLE.			
You may enter '?CONDITION' (e.g., ?AGE) at the 'Select CONDITION:'			
prompt to see a description of a condition or range of conditions.			
Enter '?*' to see the descriptions for all conditions.			
7//UNDER CONSTRUCTION			
Select RATIONALE: 			
Select TIME FRAME: 			
*** THIS MONITOR IS STILL UNDER CONSTRUCTION, CANNOT CONTINUE ***			
*** THIS MONITOR'S ON/OFF SWITCH IS TURNED OFF, CANNOT CONTINUE ***			
*** NO TIME FRAME FOUND FOR THIS MONITOR, CANNOT CONTINUE ***			
Date for SAMPLE SIZE data: 			
*** OUTSIDE START/END DATE RANGE OF MONITOR ***			
*** START DATE: 			
    END DATE: 			
*** NO START/END DATE FOR TIME FRAME, CANNOT CONTINUE ***			
SAMPLE SIZE data was last edited: 			
Current FALL OUTS:   			
Current SAMPLE SIZE: 			
Add/Subtract SAMPLE SIZE  (-1000000 -> 1000000): 			
Enter the number you wish to add to or			
subtract from the current SAMPLE SIZE.			
New SAMPLE SIZE:     			
EVENT DATE: 			
Searching FALL OUT file for this patient/monitor...			
No fall outs found for this patient/monitor.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
