English	French	Notes	Complete/Exclude
You cannot run a canceled template!			
An error has occurred (			
This CST already has a valid task 			
This CST has completed converting the data in its date range.			
The event must be 'RE-CONVERT' in order to run this CST again.			
You are about to request a RE-CONVERT event 'again' using this CST.			
Are you sure you want to do this?: 			
This CST has already completed an ESTIMATE event.			
Re-running the ESTIMATE will delete the totals previously stored.			
Requested Event      : 			
Last Event Status    : 			
Last Requested Action: 			
Request Action: 			
RE-START			
You are requesting to STOP the running of this CST.			
This ACTION is the same(or similar) as the previous action on this CST.			
All fields must be answered. Nothing has been scheduled.			
You cannot edit a canceled template!			
This template has completed its 			
Do you want to request a			
 'RE-CONVERT' to be run for this CST?: 			
Do you want to schedule this 			
 event to run?: 			
The CST must have a completed ESTIMATE event to re-generate the bulletin.			
Estimate bulletin 			
has been sent to 			
was not generated due to an error - try agin later			
This template has 			
completed successfully and does not need to be canceled			
already been canceled			
This CST has started, but has not successfully completed running.			
Are you sure you want to cancel this CST? 			
Conversion is complete - this function is invalid!			
TYPE OF ENTRY TO 			
CONVERT: 			
Select the type of entry you want to 			
convert from the list			
ENTER THE 			
SCHEDULING VISIT ENTRY #			
ENCOUNTER ENTRY #			
DISPOSITION DATE/TIME			
APPOINTMENT DATE/TIME			
, IF KNOWN: 			
internal entry number			
convert, if you know it			
Date may be entered in internal or external format			
Must be a valid 			
 for the patient			
, on or before 			
If not known, Press RETURN to review the 			
s on a specific date			
Enter a valid date or date and time of the patient's 			
 The date must be on or before 			
If you enter only a date, all the patient's 			
s on that date will be			
 presented one at a time.  If the entry displayed is the correct one,			
 you may request it be 			
converted or if not the correct one, reject it.			
NO ENTRY SELECTED			
APMapm			
UNKNOWN ERROR			
CONVERSION ENCOUNTERED THE FOLLOWING ERROR(S): 			
CONVERSION WAS SUCCESSFUL			
No valid 			
 was found for 			
INVALID SELECTION: 			
ese errors			
is error			
 may apply to one or more of the ADD/EDIT's entries)			
IS THIS THE CORRECT ENTRY?: 			
If you say YES here, this entry will be converted			
Converting^Reconverting			
SCDATA(			
This action allows PERMANENT DELETION of old Scheduling files!			
If you are at all uncertain about this option, DO NOT delete any files.			
SCCV CONV DELETE FILE MENU			
SCCV.DELETE			
SCCV.DELETE.DX			
Data and DD Deleted			
DD Deleted Only			
Deletion Not Allowed			
It appears that no conversion was completed at your site.			
If you choose to continue, all data in the old Scheduling files could be lost.			
This action will PERMANENTLY DELETE any selected files!			
Are you absolutely sure you want to do this?: 			
Deleting File # 			
 is not allowed.			
You did not convert back to '			
DD and templates for File # 			
have already been deleted!			
You have one or more gaps in conversion dates from your earliest			
date to convert (			
You must finish converting before you can delete any of these files.			
No file deletes can be performed until a date has been			
recorded in the conversion site parameters indicating			
that the conversion is complete.			
I am about to PERMANENTLY DELETE file #			
Does your site have a backup/archive of this file? 			
Cannot delete data dictionary and templates for file!			
Data Dictionary and Template Deletion of			
 is in process...			
Data Dictionary and Templates for File # 			
have been deleted.			
have NOT been deleted.			
NOTE:  Only the data dictionary and templates have been			
       In order to delete the data, execute the following action:			
                  Data Global Deletion			
       However, you must first determine if KILLing at the global			
       root level is allowed for this global '			
' on your			
       Unfortunately, there is no programmer API to check this			
       global characteristic using Kernel tools.			
       If you need help checking and setting this global parameter,			
       please contact National VistA Support (NVS).			
OPC ERRORS			
SCHEDULING VISITS			
OUTPATIENT DIAGNOSIS			
OUTPATIENT PROVIDER			
Invalid file number '			
Data global '			
' cannot be KILLed. ^DIC(			
) still exists.			
' cannot be KILLed. ^DD(			
' does not exist. Global does not need to be KILLed.			
Cannot kill data global!			
' successfully KILLed.			
Data gloabl '			
' was not KILLed.			
Are you sure you want to KILL the '			
Are you sure global root KILL protection is turned off? 			
>>> Protection error has occurred. Global has not been KILLed.			
    You must removed root-level protection on global.			
SCCV.			
    No Templates On File			
You cannot select a canceled template!			
FYI: There are 			
 lines in the error list			
 LOG PRINT]			
S FOUND FOR THIS 			
CST Log #			
SCCV RESOURCE			
SCCV-VIS-			
SCCV-BOTH-			
SD TO PCE DB CONV			
AE-1			
Outpatient encounter			
SCCV-ERR-			
NO-VIS			
AE-			
APPT-3			
APPT-			
CREDIT-			
CREDIT-4			
DIS-5			
DIS-			
Scheduling Conversion Global Growth for 			
SCHEDULING CONVERSION GLOBAL ESTIMATOR			
SCLINES(			
Total # new entries expected:			
Total # encounters to convert:			
  Credit Stops: 			
ESTIMATED GLOBAL BLOCK GROWTH			
 The estimate algorithm factors in global			
 pointer data and data requirements (including			
 cross references) at a 70% efficiency level.			
 Each block represents 			
 SCE Example: 			
Include CST Detail? 			
SCCV CONV ESTIMATE SUMMARY			
Global Block Growth			
 Total Blocks			
 (Grand Total:  			
New Entries			
 Total Entries			
Modified Entries			
Global Block Estimates per Entry			
 New Entries			
 Updated Entries			
 Note: Estimates are assuming the following:			
                  Block Size: 			
           Global Efficiency: 70%			
SCCV GESTIMATE			
 as task #			
Template canceled by user #: 			
ERROR #: 			
Calling			
ERROR MESSAGE FROM DATA2PCE^PXAPI			
   Enctr Dt: 			
appointment^add/edit^disposition^credit stop			
Scheduling Conversion Template #			
SCTXT(			
The conversion event has been '			
                Conversion Event: 			
                      End   Date: 			
                 - not converted: 			
    Total # of errors logged    : 			
 encountered during this conversion run.			
For details, review the 'Error Log' in the 'View Template' action.			
SCCV CONV PARAM MENU			
SCCV.PARAM			
SCCV.PARAM.DX			
Earliest encounter date to be converted: 			
Limit CST date range to 1 year or less?: 			
             Default Disposition Clinic: 			
                 Maximum Errors Allowed: 			
            Display Cancelled Templates: 			
Date Conversion Completed: 			
* UNEDITABLE - CST entry(s) missing or incomplete *			
Date Deletion   Completed: 			
Do you want to delete the old scheduling files now? 			
DATE CONVERSION COMPLETED must be entered before you can enter this date			
Entering this date indicates that your site is finished			
deleting any old encounter files that can be deleted.			
You must complete or cancel each CST before you may enter this date			
At least one CST was found to be missing or incomplete			
Entering this date prevents you from converting any more data from the old			
 Scheduling files to the PCE V-files			
PXK-SD			
SCPCE..			
) WAS NOT CONVERTED			
PXKERROR(			
  PROVIDER ERROR 			
Post-Install Started...			
Post-Install Finished.			
   >>> SCCV RESOURCE device setup...			
Scheduling Conversion Resource Device			
         ...Device already exists.			
         ...Resource device successfully created.			
         ...Unable to create resource device!			
   >>> Queuing task to transfer log data from Scheduling Visits file			
         o  Data already has been transferred.			
            (No task queued.)			
Transferring log data from Scheduling Visits file			
  >>>  Task Started: 			
   >>> Task stopped by user. <<<			
   >>> Task Completed.			
 Records processed.			
Transfer of Scheduling Visits Log Data - Task Information			
SDTEXT(			
an encounter which occurred prior			
Conversion functionality is disabled.			
>>> The estimated global growth profile for this template is the following:			
Blocks			
[Block Size: 			
>>> Please verify that enough global disk space and journal space			
    are available for these anticipated increases.			
>>> Also, please verify that system backup is not scheduled to			
    run within the start and stop times of this conversion job.			
AMB-CARE			
-1^Did not pass pointer to encounter			
-1^Did not pass valid pointer to encounter			
-1^Encounter Date is prior to 10/1/96			
-1^Unable to create entry in Transmitted Outpatient Encounter file			
-1^No Pointer			
-1^Did not pass date/time Outpatient Encounter occurred			
-1^Did not pass valid pointer to patient			
-1^Unable to create entry in Deleted Outpatient Encounter file			
-1^Did not pass valid pointer to Transmitted Outpatient Encounter			
-1^Did not pass valid error code			
-1^Did not pass valid pointer to TRANSMITTED OUTPATIENT ENCOUNTER file			
-1^Did not pass HL7 Message Control ID given to the transmitted encounter			
-1^Did not pass HL7 Batch Control ID given to the transmitted encounter			
-1^Unable to determine encounter date/time			
-1^Unable to determine patient			
-1^Unable to determine encounter's clinic			
-1^Unable to determine encounter's division			
-1^Unable to determine encounter's Unique Visit ID			
-1^Unable to create entry in ACRP TRANSMISSION HISTORY file			
Performing Ambulatory Care Validation Checks.			
No validation errors found!			
Do you wish to correct the validation errors			
IORVON;IORVOFF;IOIL;IOSTBM;IOSC;IORC;IOEDEOP;IOINHI;IOINORM;IOUON;IOUOFF;IOBON;IOBOFF;IOSGR0			
IORVON;IORVOFF;IOSC;IORC;IOEDEOP;IOINHI;IOINORM;IOUON;IOUOFF;IOBON;IOBOFF;IOSGR0			
SCDX-XMIT-BLD			
SCDX AMBCARE SEND SERVER FOR ADT-Z00			
Unable to initialize HL7 variables - protocol not found			
Unable to create batch HL7 message			
REQUIRE PROVIDER AND DIAGNOSIS FOR CHECKOUT FROM CLINICS			
-1^Entry in Transmitted Outpatient Encounter file does not reference an encounter			
Outpatient Encounter did not refer to a patient			
-1^Unable to create MSH segment			
SCDX SEGMENTS			
Transmission of data to the National Patient Care Database has completed.			
 Outpatient Encounters were sent.			
 Outpatient Encounters were not sent.			
Please review the IEMM Error listing for further detail.			
Transmission of data to NPCDB completed			
SCDX AMBCARE TO NPCDB SUMMARY			
** TRANSMISSION OF DATA TO NPCDB NOT COMPLETED **			
Creation/Editting of encounter			
Deletion of encounter			
Retransmission of encounter			
ACRP NIGHTLY TRANSMISSION BUILDER			
The following activity occurred 			
after the National Patient Care			
Database was closed			
 for yearly workload credit but will be sent			
to the NPCD for historical accuracy of the database.			
 for monthly workload credit but will be sent			
to the NPCD to be included in the fiscal year totals.			
20 or more days after the encounter			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
