English	French	Notes	Complete/Exclude
1) Setup active primary care team(s)			
2) Setup active PC Practitioner position(s)			
3) Setup any necessary preceptor/preceptee relationships			
4) Assign practitioner to position(s)			
A patient can only have one PC team and one			
PC Position assignment on a given day.  The patient must be			
assigned to a position's team to be assigned to the position.			
Note: You must the use the PCMM GUI if the patient was:			
o unassigned from PC assignment today or in the future			
o assigned to a future PC assignment.			
Checking PC Team and Position Status...			
No current PC Team/PC Practitioner Assignments			
Press enter to continue.			
This patient has future assignments for Primary Care			
Team and/or Practitioner			
You must use PCMM's Graphical User Interface to change			
This patient has NO active Primary Care Team, but does have			
an active PC Position Assignment			
No position defined			
About to Unassign 			
Position Unassignment 			
NOT made.			
 is associated with the 			
Patient has restricted consults due to team assignment(s):			
This patient may only be enrolled in clinics via			
Edit Clinic Enrollment Data option			
Do you wish to enroll the patient from this clinic on 			
Clinic Enrollment			
NOT made			
 is enrolled in the associated 			
Do you wish to discharge the patient from this clinic on 			
AND from 			
PC assignment unassigned.			
Future/Current Patient-Position Assignment exists			
Team Unassignment 			
Checking for other position assignments to team...			
Unassignment date already exists or unassignment after assignment date			
- Correct via PCMM GUI			
 current/future position assignment(s)			
About to unassign the above patient-position assignments			
Problem with unassignment, correct via PCMM GUI			
About to Assign 			
 to a primary care team			
********** This patient is 50 percent or greater service-connected ************			
This assignment will reach or exceeded the maximum set for this team.			
Maximum set for team: 			
Team Assignment 			
 to PC Position Assignment			
POSITION's Current PRACTITIONER: 			
POSITION's Name: 			
Maximum set for position: 			
Position Assignment 			
Do you wish to continue with the assignment (Yes/No)?			
Are you sure (Yes/No)			
Choose way to select PC POSITION Assignment: 			
Unassignment			
TODAY-1			
Service Connected %: 			
Are you seeking Primary Care panel assignment			
 for your service connected disability			
Do you wish to place the patient on the wait list (Yes/No)?			
Patient Placed on Wait List			
 points to an INSTITUTION that is not NATIONAL.			
Team Selection			
Position Selection			
Positons: 			
This report is formatted for standard letter size output			
Teams: 			
Do you want a page break as the 			
TEAM PROFILE REPORT			
SCTEAMS(			
NO POSITIONS			
NO STANDARD ROLE			
Team Name: 			
Team Telephone: 			
Provides     Patients			
Standard Role			
Allowed			
Team Settings:			
Maximum Patients: 			
This team can provide primary care.			
This is not a primary care team			
This team is closed to further patients.			
This team is still accepting patients.			
Team Description:			
No Information for the Team Profile report			
Primary Care Management Team Profile Report			
 Patient-Team Assignment Message			
 PATIENT-TEAM ASSIGNMENT for Patient (			
Current Patient Team Data:			
Previous Patient Team Data:			
Fields: 			
Previous Data:             Current Patient Data:			
Multiple PATIENT-TEAM ASSIGNMENT for 			
Sending Multiple Patient-Team Assignment Message			
Team:                  			
Effective Date:        			
There has been a new team assignment for the following patients:			
There has been NO new team assignment for the following patients:			
IF $D(^SCTM(404.57,			
Activation must be defined before Discharge			
Team Not Active			
Already an activation for patient/team on this date			
Existing active patient/team assignment already			
Activation must be before discharge			
Existing future activation before this inactivation			
SCMC ENCOUNTER CONVERSION EVENTS			
 Patient-Position Assignment Message			
 PATIENT-POSITION ASSIGNMENT for Patient (			
Previous Data:           Current Patient Data:			
Multiple PATIENT-POSITION ASSIGNMENT for 			
Sending Multiple Patient-Position Assignment Message			
Position:              			
There has been a new position assignment for the following patients:			
There has been NO new position assignment for the following patients:			
Duplicate Criteria Not Allowed for Same Report			
Duplicate SORT BY TEXT Not Allowed for Same Report			
Duplicate Team Positions Not Allowed			
Bad input data			
Inactivation date is after this date			
Position Not active on this date			
No active Patient Team Assignment on this date			
No activation date in Pt Team Assignment			
Activation date is after this date			
Inactivation date must be when position is active			
Team Position Must be from Team in Pt Team Assignment			
Undefined Patient Team Data			
PC Roles only allowed if Pt Team Assignment is for Primary Care			
 Position Assignment			
    This task will send a MailMan message to you containing			
    the results of the position assignment review.			
Patient Team Position Assignment Review			
SCTMLST(			
SCTP DANGLERS			
>>> Press RETURN to continue: 			
  In order to correct the following active positions with discharged team			
assignments, please refer to the documentation for the Patient Team			
Position Assignment Review option found in the Stand-alone Options			
Section of the PCMM User Guide.			
Diagnostic Only			
Fix			
   Teams Reviewed: 			
   Patient Team Position Assignments Reviewed: 			
   Number of Assignments with Problems       : 			
           Error: Position Assigned Date is BEFORE Team Assigned Date			
                    Position Assigned Date: 			
                        Team Assigned Date: 			
           Error: Position Unassigned Date is AFTER Team Unassigned Date			
                         Team Unassigned Date: 			
                     Position Unassigned Date: 			
Deleting Traditional ASTAT CROSS REFERENCE from FILE 404.43			
SD*5.3*264			
Removing Patients with Date of Death from Team/Position Assignments			
Starting with Dates of Death in 			
Setting up GUI to VistA mapping			
SD*5.3*278			
PCMM CLIENT LIST			
-1^not a valid server name			
-1^Server variable not defined.			
-1^This server is not in the PCMM SERVER PATCH file.			
-1^This server is not active.			
-1^No clients found for this Server.			
-1^Client variable not defined.			
-1^Client not defined in PCMM CLIENT PATCH file.			
PCMM ACTIVE SERVERS			
SC1(1)			
SC2(1)			
Wait list entry deleted			
3;ON WAITLIST TEAM: 			
RESIDENT (PHYSICIAN)			
SCPATIENT LIST			
SCTMP LIST			
SC*			
Multiple PATIENT-TEAM REASSIGNMENT FAILURES for 			
Sending Multiple Patient-Team Reassignment Failures Message			
There has been NO new team reassignment for the following patients:			
PCMM Reassignment			
Multiple PATIENT-POSITION REASSIGNMENT FAILURES for 			
Total Processed:       			
From Team:             			
From Position:         			
There has been NO new position reassignment for the following patients:			
The following position reassignments did not complete processing:			
Updating of all clinics contained in the HOSPITAL LOCATION			
file (#44) to require provider and diagnosis for checkout			
completed on 			
HOSPITAL LOCATION UPDATE COMPLETED			
>>> Setting parameters contained in SCHEDULING PARAMETER file (#404.91)			
   *** Unable to create/find entry in Scheduling Parameter file			
   *** Unable to store parameters relating to Ambulatory Care			
    Parameters relating to Ambulatory Care have been stored			
>>> Attaching mail group to Ambulatory Care transmission summary bulletin			
    ** MAS PARAMETER file (#43) does not have a value for			
       the OPC GENERATE MAIL GROUP field (#216)			
    ** Unable to attach mail group to the SCDX AMBCARE			
       TO NPCDB SUMMARY bulletin			
    ** Mail group must be added to bulletin manually			
    ** Unable to find entry for SCDX AMBCARE TO NPCDB			
       SUMMARY in BULLETIN file (#3.6)			
    ** Bulletin must be manually entered			
    Mail group contained in the OPC GENERATE MAIL GROUP			
    field (#216) of the MAS PARAMETER file (#43) has			
    been attached to the SCDX AMBCARE TO NPCDB SUMMARY bulletin			
>>> Installing correct version of routine SDM			
SD*5.3*41			
    PCMM has NOT been installed.  Will install a version			
    of routine SDM that DOES NOT have the PCMM changes			
    applied to it.			
    MSM sites must copy the SDM routine to all appropriate UCIs			
    ********** PLEASE NOTE THE FOLLOWING ***********			
    * After installing PCMM, call the routine      *			
    * SCMSP at theline tag SDM (i.e. D SDM^SCMSP)  *			
    * in order to install a version of routine SDM *			
    * with the ACRP & PCMM changes applied to it.  *			
    * MSM sites will then need to copy the updated *			
    * SDM routine to all appropriate UCIs.         *			
    PCMM has been installed.  Will install a version			
    of routine SDM that has the PCMM changes applied			
    to it			
>>> Creating entry for Z00 in HL7 EVENT TYPE CODE file (#779.001)			
2///Ambulatory Care transmission to/from NPCDB			
    Existing entry found - support of HL7 v2.2 will be added/verified			
    Entry created - support of HL7 v2.2 will be added			
    ** Unable to create entry for Z00			
    Support for HL7 v2.2 			
    ** Unable to add support for HL7 v2.2			
    ** Support for HL7 v2.2 must be added manually			
>>> Creating entries in HL APPLICATION file (#771)			
AMBCARE-DHCP			
    ** Entries for AMBCARE-DHCP and NPCD-AAC in the HL			
       APPLICATION file (#771) can not be created			
     Creating entry for sending application (AMBCARE-DHCP)			
       Entry for AMBCARE-DHCP successfully created			
      Existing entry for AMBCARE-DHCP found - current values not overwritten			
       ** Unable to create entry for AMBCARE-DHCP			
       ** Sending application must be added manually			
NPCD-AAC			
     Creating entry for receiving application (NPCD-AAC)			
       Entry for NPCD-AAC successfully created			
      Existing entry for NPCD-AAC found - current values not overwritten			
       ** Unable to create entry for NPCD-AAC			
       ** Receiving application must be added manually			
>>> Creating entry in MAIL GROUP file (#3.8)			
SCDX AMBCARE TO NPCDB			
Mail Group used by the Ambulatory Care Reporting Project to			
transmit data to the National Patient Care Database via HL7			
    Entry for SCDX AMBCARE TO NPCDB successfully created			
    ** Unable to create entry for SCDX AMBCARE TO NPCDB			
    Adding National Patient Care Database (NPCDB) to Mail Group			
XXX@Q-ACS.MED.VA.GOV			
    XXX@Q-ACS.MED.VA.GOV successfully added as REMOTE MEMBER			
    ** Unable to add XXX@Q-ACS.MED.VA.GOV as REMOTE MEMBER			
    ** Remote member must be added manually			
>>> Creating entry in HL LOWER LEVEL PROTOCOL PARAMETER file (#869.2)			
.02///MAILMAN;100.01///SCDX AMBCARE TO NPCDB			
    Entry for AMB-CARE created			
    Entry for AMB-CARE found			
    Existing information will not be overwritten			
    ** Unable to create entry for AMB-CARE			
>>> Creating entry in HL LOGICAL LINK file (#870)			
>>> Enabling Ambulatory Care event handler			
SCDX AMBCARE EVENT			
    ** Unable to find SCDX AMBCARE EVENT in PROTOCOL file (#101)			
    ** Entry must be manually created			
>>> Correcting entry in PROTOCOL file (#101) for server protocol			
    ** Unable to find SCDX AMBCARE SEND SERVER FOR ADT-Z00			
       in PROTOCOL file (#101)			
    ** Unable to find AMBCARE-DHCP in HL7 APPLICATION file (#771)			
    ** Entry must be manually created and attached to			
       the SCDX AMBCARE SEND SERVER FOR ADT-Z00 protocol			
SCDX AMBCARE SEND CLIENT FOR ADT-Z00			
    ** Unable to find SCDX AMBCARE SEND CLIENT FOR ADT-Z00			
    ** Unable to find NPCD-AAC in HL7 APPLICATION file (#771)			
       the SCDX AMBCARE SEND CLIENT FOR ADT-Z00 protocol			
    ** Unable to find AMB-CARE in HL LOGICAL LINK file (#870)			
Background job to activate AMBCARE validation checker at			
Check-Out for all clinics will be queued for 			
*** Unable to queue task ***			
Queued as task number 			
Removing AMBCARE event handler from Scheduling event driver item list.			
Adding AMBCARE event handler to the exit action of SDAM APPOINTMENT EVENTS			
Re-indexing the four new cross references in the Transmitted Outpatient Encounter Error file.			
Re-indexing completed!			
file (#44) to run the AMBCARE validator at Check-Out was			
Removal of SCDX AMBCARE EVENT protocol from the Scheduling Event driver			
was not completed.  Please review the installation instructions of this patch.			
was completed.			
The protocol 'SDAM APPOINTMENT EVENTS' could not be found.			
Please review the installation instructions for this patch.			
The AMBCARE event handler call exists in the Scheduling event driver exit action!			
SCMS(			
Updating of 'SDAM APPOINTMENT EVENTS' exit action complete!			
The exit action for 'SDAM APPOINTMENT EVENTS' on your system was:			
An attempt was made to replace it, but failed.			
It has been replaced with D EN^SCDXHLDR			
You will need to edit this protocol's exit action to restore your changes.			
  Checking for installation of PCE version 1.0 ...			
    Installation of Ambulatory Care requires that PCE version			
    1.0 be installed - you have version 			
XU*8.0*27			
    XU*8.0*27 be installed.  Install will be aborted at end of			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
