English	French	Notes	Complete/Exclude
  Enter 'Y' to convert the Names in the New Person file			
  to standard form, and to store the component parts of			
  the Names in the new Name Components file.			
It appears that the conversion has already been performed through			
 in the New Person file.			
Do you want to continue the conversion from after this point			
or convert the entries from the beginning of the file.			
;S:Start again from the beginning of the file			
  Enter 'C' to start the conversion and parsing process from the			
  after record #			
  Enter 'B' to start the conversion and parsing process from the			
  the beginning of the New Person file.			
  NOTE: There is no harm in running the conversion again from the			
  beginning. However, if the conversion routine previously parsed a name			
  into its component parts incorrectly, and you corrected those problems			
  by manually editing the name components, your corrections will be lost			
  if you run the conversion again.			
in the New person file.			
Do you want to run the conversion again			
  Enter 'Y' if you wish to run the New Person Name conversion again.			
  conversion routine previously parsed a name into its component parts			
  incorrectly, and you corrected those problems by manually editing the			
  name components, your corrections will be lost if you run the conversion			
Created by CONVERT~XLFNAME			
  Enter 'Y' to store information in ^XTMP about changes that			
  will take place when the CONVERT^XLFNAME entry point is run.			
It appears that the conversion of New Person Names (routine CONVERT^XLFNAME)			
has already been run. If you continue, the information already stored in			
  Enter 'Y' if you wish to replace the information already in ^XTMP.			
Created by GENERATE~XLFNAME			
NAME COMPONENTS			
This patch brings in a new NAME COMPONENTS file (#20),			
but file #20, 			
, already exists on this system.			
Note that the Big Bang patch A4A7*1.01*11, released 17-Dec-1998,			
deletes the DD for file #20, but step 5 of that patch, 			
may not have been performed in this account.			
Old Name: 			
New Name: 			
** Unable to file new name **			
     There is no corresponding entry in the Name Components file.			
NEW PERSON NAMES FIXED BY FIX^XLFNP176			
HOW FIX^XLFNP176 WOULD FIX NEW PERSON NAMES			
Fix names or just print a Report (F/R)? 			
Answer 'R' to print a report of names with a potential problems.			
Answer 'F' to fix the names.			
Names in New Person file with spaces within a suffix.			
Routine XLFNP176 was released with patch XU*8*176.			
This entry point (FIX^XLFNP176) loops through all the entries in the New			
Person file (#200) and looks for names that may have been standardized and			
parsed incorrectly by the Name Standardization Patch XU*8*134. If a name			
in the New Person file prior to the installation of Patch XU*8*134			
contained periods within its suffix, the Post-Install Conversion of that			
patch converted those periods to spaces, and didn't recognize the name			
component as a suffix. This entry point prints a report of names that may			
have the problem, and optionally corrects them.			
NOTE: This routine should be run only after Patches XU*8*134 and XU*8*152			
have been installed.			
XU*8.0*134			
XU*8.0*152			
  It appears that the above two patches have NOT been installed on			
  your system. Exiting ...			
  It appears that those two patches HAVE been installed in this acccount			
Each New Person file Name will be checked to determine whether any			
following strings occur at the end of the Name:			
Do you wish to use a different list			
  Enter 'YES' to exit and modify line tag LIST^XLFNP162.			
  Enter 'NO' to accept the above list and continue.			
  Edit the list at line tag LIST^XLFNP176.			
Enter a IP address to lookup: www.va.gov//			
Looking up 			
Call server: 			
Got connection, Send message			
Wait for reply			
Returned question: 			
Time-out			
Return msg length: 			
Bad Response			
Opcode			
RI(			
Test Account DNS address not installed.			
XLF(			
DNS address installed.			
DUZ NAME			
LAST USE			
 no banner.			
NEW MSGS			
POSTMASTER has X baskets.			
IORVON;IORVOFF;IOBON;IOBOFF			
MailMan Option^1N^			
TO PROMPT			
SHARE BSKT			
SHARE DATE			
Name cannot be 			
LESS THAN 7			
GREATER THAN 30			
Name must not contain punctuation other than a '.' and a maximum of two '.'s.			
Please try again, Some one else is enterring a mail name.			
  >> Already in use			
  >> This name is not unique -- it is a partial match to another name			
The string '			
' identifies someone else.			
Mail names are used as return addresses when you send a message to someone			
whose mail box is in a different mail environment.  It could be different			
machines in the same facility, an entirely separate facility or simply a			
different configuration (or UCI) on the same machine.			
The valid format for a mail name is one that is acceptable to all			
mail systems.  It is therefore between 7 and 30 characters long, and			
contains no punction other than periods.  It may contain up to two (2)			
periods each of which must be preceeded and succeeded with at least			
one alpha or numeric character.			
Imaging is not installed here.  You can not send multimedia messages.			
Do you want to attach 			
 patient's image to this message?  N// 			
You did not add any 'Other Body Parts' (files) to this message.			
Do you wish to deliver just the text ? N// 			
  <<< Please answer 'YES' or 'NO'			
You may add or remove a BLOB from the message.  To add a BLOB			
enter the name of the BLOB you wish to add to the message.  This			
BLOB must already be in the * file.  To remove on, preceed the			
name of the BLOB with a '-'.  Example:  To add the BLOB named			
ZZTEMP, enter 'ZZTEMP'.  To remove it enter '-ZZTEMP'.			
The following BLOBs have already been added to this message:			
This message has non-textual body-parts: 			
 has no recipients.			
E2 No message text !			
E4 No message text !			
E1 No subject !			
E3 Subject too long or short !			
FORUM.MED.VA.GOV			
*** Stopping prematurely per user request ***			
do not purge			
Unref Msg			
XMTYPE(			
XMPARM*			
XM DATE PURGE WARNING			
Sorry...this option only works for VAX DSM			
In process...it will take a little time to complete the transmission.			
Process Aborted !!!			
$! FTP COM procedure for fetching file from server and sending it			
$ assign/user nla0: sys$output			
$ assign/user sys$input sys$command			
SCR HINT			
XM TOO MANY MESSAGES			
There are non-textual parts (BLOBs) included on this message			
Object Name			
Pick a BLOB you wish to display from the above list (1-			
Choose the index number of the BLOB you wish to display or accept the default.			
Please choose a listed item by typing in its index number.			
Execute Other Message Part (			
There are non-textual body parts (BLOBs) attached to this			
message.  You may not execute them (display...) because you			
are not using the proper terminal.			
Query the message to see the list of BLOBs attached.			
Queued mail report from 			
SET XMDUZ			
CHG XMDUZ			
SET XMV			
XMYBLOB(			
XMATTACH(			
FIRST SCRIPT			
<MailMan Bulletin API>			
BLOB NOT SENT			
The Bulletin '			
was sent without non-textual body parts (BLOBS).			
The error returned from the imaging API was: 			
Members have been added to the 			
 Mail Group.			
E907 No members specified to add to Mail Group 			
 is not a user to use as an organizer of a mail group.			
E910 Mail Group 			
 could not be found !			
 is not valid -- it is shorter than 3 characters			
 is not valid -- it is longer than 30 characters			
 (not valid, must be 0 or 1).			
Mail Group (			
) creation failed!			
Mail Group 			
 File could not be locked - Did not add members.			
E908 Invalid member (			
) - NOT pointer to ^VA(200			
 File could not be locked - Did not delete members.			
E909 Member delete attempted with no members specified.			
There was a call to the Mail Group Applications Programmer			
Interface (API) that required notification to the user:			
MAIL GROUP API			
SCR IEN			
SCR REC			
HELO RECV			
HELO SEND			
SHOW TRAN			
ER=			
Script command: 			
you entered			
This domain is not yet christened. It cannot christen others			
until initialized and christened by a parent domain.			
This process will create a new subordinate domain to this domain			
and update network relationships both there and here, as well as			
inform this domain's parent.			
Do you really want to do this? NO// 			
Enter the name of the subordinate domain which you wish to christen			
ON LINE			
NO-IP			
TASK-IN			
This tests the modem autodialer by allowing you to enter a phone number			
which this program will then dial on the selected modem.			
This device has no modem defined for it.			
 is the defined modem for device 			
Checking status...			
No dialer logic specified for this modem type			
No hangup logic specified for this modem type			
Enter the phone number to dial			
Call failed: 			
Successful.  Now hanging up ...			
Hang up unsuccessful			
Hang up successful.			
This procedure will test the Simple Mail Transfer Protocol,			
allowing you to interactively enter each of the SMTP commands.			
The messages will not actually be delivered to the named recipients.			
That which you type will be preceded with an 'S: '.			
The SMTP responses will be preceded with an 'R: '			
Terminate the session with a QUIT command			
This will test a link by executing the script, then sending 20 lines			
in echo test mode.  It will report the number of recoverable and 			
unrecoverable errors, as well as the transmission efficiency.			
XMSECURE(			
TCP/IP Tester			
Enter the TCP/IP address of remote site			
Trying Connection...			
TCP/IP link not open			
Connection OPEN, Testing...			
No answer from mailer at 			
XMPARM(			
WORKING...			
Transmission time in seconds:  			
   Enter a non-zero number of seconds, please.			
First message to compare: 			
Second message to compare: 			
You don't have a DUZ.			
YOU MUST CHOOSE ANOTHER DEVICE			
<<<< You are now talking through device 			
===== Enter <control>A to stop. =====			
S:STOP capture			
 <Continue in TalkMan Mode >			
 <No Kermit use yet. The correct Kernel tools version is not installed !>			
 DIALOG CAPTURE 			
End of Talkman session.			
You are back at your starting place.			
TalkMan dialog capture being delivered now.			
Do you want help			
XMTALK-USER			
Attempting to connect....			
Could not connect to 			
You are back at 			
IP TRIED			
SHARED,MAIL			
Error = No message text			
Error = No message subject			
Error = Message subject too long or too short			
Error = 			
Error = No recipients.			
  User ID needed (DUZ) !!			
FWD BY			
<<< This task seems to be running already !			
(It cannot be run multiple times concurrently.) >>>			
Killing off old AUTOMATIC entries for this code (			
Starting load			
Task Completed			
Remote Directories summary:			
 Wang system records processed.			
 NOAVA system records processed.			
REMOTE DIRECTORY AUTOMATIC UPDATE			
You are about to load a file containing a list of names and			
addresses into you Remote User Directory (file 4.2997).  This			
file originated either from a NOAVA system or a WANG system.			
Choose the correct file.  We will check it some for format.			
Enter either HFS-WANG-DIR or HFS-NOAVA-DIR: 			
HFS-NOAVA-DIR			
Do you want your job queued? (Answer YES or NO)  NO// 			
Before the update occurs entries older than 90 days in the directory			
are deleted if they were automatically filed by this procedure.			
Manually entered entries are deleted if they haven't been used			
for at least 2 years.			
Users are informed that an update is occuring if they are using			
MailLink help options.  But are allowed to continue.			
Are you sure you want to do this (Answer 'YES/NO'): NO//			
Convert MailLink list			
Answer 'YES' if you mean 'YES'.  All other response mean 'NO'.			
The first file to be processed is for the 			
Enter '^' to skip this portion of the process.			
The following string was read from the first line of 			
Is this correct ? NO// 			
Already on file - not filed 			
PHONE/E			
PHONE/X			
Normal error reported here			
should be end of File.			
Done processing 			
The error: 			
Request directories from all domains			
Enter YES to request directories from all domains.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
