English	French	Notes	Complete/Exclude
Sorry!			
Alerts are not yet available in windows.			
Very Sorry!			
See 'Menu Templates' options for more information.			
The Option File has been changed. This template will no longer work.			
' should be deleated and/or rebuilt.			
Sorry, the option '			
is no longer available to you.			
Because of changes to the Option File an option is no longer available.			
Option '			
is out of order.  The message is: 			
is locked.  You don't own the key.			
is not permitted to run right now.  Sorry.			
is restricted to run only only certain terminals.  You're not on one.  Sorry.			
Chose by number from: 			
 or '^' to quit: 			
Again? Y// 			
Please type 'Y' or 'N', '^' to quit, or '??' for help.			
XQUIT encountered at option 			
 halted by this encounter.  Sorry.			
Executing: 			
Choose one of the 			
Do you want some brief instructions? [Y/N] N// 			
Answer 'Y' if you want some instructions, 'N' if you don't.			
CREATING A MENU TEMPLATE			
Choose an option, type RETURN to back up one level,			
'+' to store the completed template, or '^' to quit.			
Sorry, no jumping.			
Enter an option, '+' to store the template,			
'??' for more help, or '^' to forget the whole thing.			
)  This one? [Y/N] Y// 			
Entry Action			
Exit Action			
A menu template that contains only your log-on menu?  Sorry, that's not			
allowed.  Use '^^' to return to your log-on menu instead.			
You can't back up any further!			
Press return to continue....			
You have chosen the following options in this order:			
Are we in agreement so far? [Y/N] Y// 			
OK, lets take it from the top....			
Fine.  Since all menu-type options will be processed in the background			
  you will only be asked to respond to the following:			
Are these the functions you want when you invoke this template? [Y/N] Y// 			
Enter a name (6 characters or less in UPPER CASE)			
for this template or '^' to quit: 			
A menu template name may not contain the '^' character.			
Are you telling me you want to quit? [Y/N] N// 			
Six (6) characters or less, please.			
A six character (or less) name like 'LAB', or 'E1',			
 something you will remember.			
' it is.  In the future you will start this template by typing '[			
After you have finished using '			
' will you want it to repeat? [Y/N] N// 			
You already have a template called 			
.  Do you want to replace it? N// 			
Are We In Agreement			
 doesn't have any Templates stored in the New Person File.			
The menu templates of 			
Template name: 			
1st option: 			
*** Missing Option ***			
2nd option: 			
Etc.			
Which template? ('^' to quit) ^// 			
  Enter the name of one of your templates, 'ALL' to list them all,			
or '??' to get a list of all your templates.			
Are saying you want to print out all your templates? (Y/N) Y// 			
Please answer 'Y' or 'N' to this question.			
Show Entry and Exit Actions? (Y/N) N// 			
'Y' means you'll see the MUMPS code (if any) executed			
before and after the option is run.  'N' means you won't			
Menu Template 			
*** Fatal Error *** Option missing from Option File ***			
This template will not run.  Delete and/or rebuild it.			
Hit RETURN to continue, '^' to quit: 			
Which template should be deleted ? 			
Enter a template name, '??' to get a list of your templates			
  or '^' to quit.			
I will remove the Menu Template 			
Please answer 'Y' or 'N' or '^' to quit.			
Rename which template? 			
==> Your menu structure has changed.  Sorry,			
you will have to recreate this template.			
You were last executing the '			
' menu option.			
Do you wish to resume			
If you wish to continue at the last option you were executing, enter 'Y',			
Great^OK^All right^Well certainly^Fine			
See you later.^I'll be ready when you are.^Hurry back!^Have a nice lunch.			
  **> Sorry, access to your primary menu has been denied by the application.			
An XQUIT was encountered in the Entry Action code.			
Please see your computer person.			
  **> Sorry, access to this option has been denied by the application.			
The variable XQUIT was encountered at the option			
You are being returned to:			
Enter '^' to escape, <CR> to view Mailman user info: 			
==>  No User stack in ^XUTL.			
Hit RETURN or ENTER to continue or 			
 to halt: 			
 has no synonyms defined.			
**> END OF MESSAGE			
RETURN to continue, 			
 to halt, 			
 to backup, or 			
 for more options: 			
Hit the 			
 Key to Continue			
Enter the number base you want converted			
BASE 			
Enter the number to convert			
 Invalid digit in number			
DECIMAL  			
ENTER A HOST FILE: 			
Enter the filename and/or path, ie, $1$DISK:[MYDIRECTORY]MYFILE.TXT			
<your hfs device>			
COULD NOT LOAD FILE!			
<Load Successful>			
G.CMP@your isc			
S.XUCM SERVER			
BRTL HOST FILE 			
No data found in ^TMP			
NO DATA TO LOAD!			
HOST FILE 			
DIWE$			
TPU 			
ZSYSTEM 			
DEL 			
In response to the DATE prompt you can enter:			
Which date? > 			
Errors have been logged on: 			
Which error? >  			
Error not on File.			
  Last error logged is 			
Incorrect response - enter '?' for more information			
'^' to return to the last question			
'^Q'  or  '^'  or <RETURN> to quit			
Date as 'DD' or 'MM/DD' or 'MM/DD/YY' or 'T'  or 'T-1'			
(note: 'T' as in Today)			
??? to list all errors with $ZE, $I, $J, and Time			
Number of error desired			
$ to get a display of the $ system variables			
Leading character(s) of symbol(s) you wish to examine			
'S' to specify text to be matched in error or routine name			
?? to list only those errors which are NOT SCREENED with $ZE, $I, $J,			
?L to obtain a list of error screens that are in place			
 logged on 			
Use SYSLOG in the %SYS namespace			
Do you want to check the OPERATING SYSTEM ERROR TRAP too			
Enter '^' to quit listing, <RETURN> to continue...			
Last Global Ref: 			
Which symbol? > 			
No such symbol			
***  WARNING: this value was NOT recorded due to an ERROR WITHIN the TRAP ***			
Process ID:  			
Username\Process Name\UCI/VOL\\$ZA\$ZB\Current $IO\Current $ZIO\CPU time\Page Faults\Direct I/O\Buffered I/O			
An error also occurred while logging this error -- This MAY CAUSE SOME			
LOCAL VARIABLES TO BE LOST.     This error was			
Enter any comments to precede the error listing:			
XTER1A-PRINT OF ERROR			
     Enter '^' to quit listing, <RETURN> to continue...			
 screened error			
UCI,VOL			
Ending Date:   			
ENDING DATE can not be BEFORE start date			
List first N occurrences, where N = 			
XTERTRP PRINT ERRS			
THIS JOB WAS INTERACTIVE -- IT WAS ***NOT*** A QUEUED JOB			
IO(0)			
MUST BE IN SAME UCI TO RESTORE PROGRAM --- VARIABLES RESTORED			
VARIABLES RESTORED			
Enter part of error or routine to be matched: 			
 not found in error log			
ErrNum			
UCI/VOL			
To Remove ALL entries except the last N days, simply enter the number N at the			
prompt.    OTHERWISE, enter return at the first prompt, and a DATE at the			
second prompt.  If no ending date is entered at the third prompt, then only			
the date specified will be deleted.  If an ending date is entered that range			
of dates INCLUSIVE will be deleted from the error log.			
Number of days to leave in error trap: 			
Enter a number (zero or greater) of days to be left in the Error Log.			
A RETURN will result in a request for dates			
Starting Date to DELETE ERRORS from: 			
Ending Date to DELETE ERRORS to: 			
 ??  CAN NOT BE EARLIER			
ERROR STRING TO LOOK FOR: 			
ENAD 			
DO   			
-- START OF ARGLESS DO 			
-- END OF ARGUMENTLESS DO 			
GOTO 			
PROC 			
LOCK 			
MERGE 			
ESTART 			
ESTOP 			
ETRIGGER 			
JOB  			
JOB 			
BREAK 			
CLOSE 			
USE 			
HALT 			
HANG 			
READ 			
READ--- 			
WRITE--- 			
Xecute 			
( QUIT FOR 			
IF   			
FOR  			
ELSE 			
Select ROUTINE or LABEL^ROUTINE: 			
The following labels are present in routine 			
 and can be			
selected for expansion.			
Select LABEL by number (1 to 			
 not found in routine 			
The following references may be selected for expansion...			
Select LINE^ROUTINE to expand (1 to 			
Press RETURN to continue, '^' to halt: 			
FLOW CHART GENERATOR FOR MUMPS ROUTINES			
< COND >  = CONDITIONAL, if 'COND' is true code to the left is performed			
[ LINE^ROU ]   = DO or SUBROUTINE call to location LINE of routine ROU,			
                 control returns to commands following this in sequence			
{ LINE^ROU } = GO TO, control is transferred to the location LINE in			
               routine ROU.			
QUEUE to run WHEN:			
Flow Chart Routine			
TASK QUEUED			
Will now install the VAX/Alpha Performance Monitor (VPM)			
XUCM MAIN			
XTCM MAIN			
Will now install the MSM 486 Performance Monitor (MPM)			
XUCS MANAGER MENU			
XU-INSTALL-DONE			
TO PROTECT THE SECURITY OF DHCP SYSTEMS, DISTRIBUTION OF THIS			
SOFTWARE FOR USE ON ANY OTHER COMPUTER SYSTEM IS PROHIBITED.			
ALL REQUESTS FOR COPIES OF THE KERNEL FOR NON-DHCP USE SHOULD			
BE REFERRED TO YOUR LOCAL ISC.			
>> You must have programmer access (DUZ(0)=@) to run this init.			
I'm checking to see if it is OK to install Toolkit v			
 in this account.			
Everything looks OK, Lets continue.			
DHCP Software Tools			
It looks like you currently have version 			
 of KERNEL installed.			
You must first install KERNEL V7.1 before this version can be installed.			
Now start a KERMIT receive on your system.			
Starting [REMOTE] KERMIT send.			
Starting a [LOCAL] KERMIT send.			
Done with 			
 send, File transfer 			
was successful.			
Bytes: 			
8 Error packet			
7 Aborting send operation			
Now start a KERMIT send from your system.			
Starting [REMOTE] KERMIT receive.			
Starting a [LOCAL] KERMIT receive.			
 receive, File transfer 			
was successful.  (			
6 Unknown packet type			
5 Aborting receive operation			
DIZ(8980,			
KERMIT File Name: 			
1 SOH in record			
3 Size error			
4 Bad checksum			
2 Receiver timeout			
KERMIT FILE TO SEND:			
If you enter 'XXX' for the file name it will be replaced by the name sent.			
RECIEVE TO KERMIT FILE:			
Aborting File Transfer!			
Send from the Host, Receive to the Host			
Not running on a VAX. Not a valid routine to run.			
This routine will build new LT_LOAD.COM, LT_PTR.DAT, TSC_LOAD.COM files			
Want to proceed			
Do not use unless you are in the startup account			
where the correct VMS files are present!			
See option description			
$! This version made on 			
The following files have been updated:			
To update the VMS configuration, the following COM			
procedures must be run on your cluster:			
SYS$MANAGER:LT_LOAD.COM			
SYS$MANAGER:SYSPRINT.COM			
Want to run them now			
SYS$MANAGER:LT_EXECUTE.COM			
$! Run LT_LOAD and SYSPRINT on the cluster			
MCR SYSMAN			
SET E/C			
DO @SYS$MANAGER:LT_LOAD.COM			
DO @SYS$MANAGER:SYSPRINT.COM			
Execute command: 			
ZSYSTEM CMD			
create port 			
set port 			
' is not in the 'Local Lookup Files' file. Unable to use lookup.			
Attempting FILEMAN lookup...			
Which code in the 			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
