English	French	Notes	Complete/Exclude
 is not the same			
 **** VALUE IS GREATER THAN 255 CHARACTERS (SEE SUBNODES FOR DATA) *** 			
%ZTER caused an error: 			
%DSM-E-ET, Error occurred in %ZTER, 			
GLOBAL SEARCH			
Global reference: 			
Non-existing global.			
Bad Routine			
Bad Date/Time			
Bad Option			
No Description (%ZTLOAD)			
Restricted Device			
QUEUE INFORMATION MISSING - NOT QUEUED			
Queueing not allowed to device -- NOT QUEUED			
Sorry--that time is restricted!			
Output is never allowed from this option!			
No Description (REQ~%ZTLOAD)			
Inactive: Interrupted			
Taskman Waiting			
Logons Inhibited			
No Signons Allowed			
Required link to 			
 is down.			
Waiting to balance the load.			
Main Loop			
Taskman Job Limit Reached			
Placed on JOB List			
Placed on C List			
Startup			
Interrupted While Running			
Startup Hang			
TM-DELAY			
Startup jobs			
Restart			
Setup			
The following required ^%ZOSF nodes are undefined: 			
Taskman 			
 is the wrong type in taskman site parameters.			
Inspected			
INVALID OUTPUT DEVICE			
Task's volume set not listed in index.			
Task's volume set not listed in file.			
Task's volume set can't accept tasks.			
Task's volume set has no link access.			
Task has no destination UCI listed.			
Task's UCI does not exist here.			
Task's entry routine does not exist here.			
Task's destination UCI failed check.			
Put On The IO List			
Your task #			
 rejected because: 			
XQA*			
Too many hops			
Ready to Move			
 as task number 			
BAD DESTINATION UCI			
Link Wait			
NO LINK ACCESS TO VOLUME SET			
Stopped while waiting for Link			
Link Error			
Caused by the manager.			
 is the wrong type of volume set for TaskMan.			
ZTLEFT=			
Taskman NOT Started			
Don't start TaskMan with the SHARE privilege			
access not authorized			
You lack the system privilege to start TaskMan.			
duplicate name			
The following error has prevented TaskMan from starting:			
TaskMan 			
SUBMIT/NOPRINT/NOLOG/USER=TASKMAN/QUEUE=TM$			
NOTE THAT THE SYSTEM IS IN A 'SIGNOFF' STATE,			
WHICH PROBABLY EXPLAINS WHY TASKS ARE NOT RUNNING!!			
TASKMAN IS ALREADY RUNNING			
YESyes^NOno			
ARE YOU SURE YOU WANT TO RESTART 			
TASKMAN? NO//			
Restarting...			
Taskman NOT Restared			
Answer YES to restart 			
TaskMan.			
TaskMan must be running in each library uci on the system for tasks to run.			
One TaskMan per library uci should be enough for all but the busiest sites.			
The System Status option and the Monitor TaskMan option can help determine			
whether a TaskMan is running on this volume set.			
If you are still uncertain how to respond, answer NO and consult your			
documentation or your support ISC.			
TaskMan restarted!			
Checking Task Manager's Environment.			
Checking Taskman's globals...			
Checking the ^%ZOSF nodes required by Taskman...			
') is missing!			
All ^%ZOSF nodes required by Taskman are defined!			
Checking the links to the required volume sets...			
The link to volume set 			
 is present!			
There are no volume sets whose links are required!			
Checks completed...Taskman's environment is okay!			
Here is the information that Taskman has:			
Operating System:  			
Volume Set:  			
Cpu-volume Pair:  			
TaskMan Files UCI and Volume Set:  			
Log Tasks?  			
Default Task Priority: 			
Task Partition Size: 			
Submanager Retention Time: 			
Min Submanager Count: 			
Taskman Hang Between New Jobs: 			
TaskMan running as a type: 			
TaskMan is using VAX DSM enviroment: 			
TaskMan is using '			
 for load balancing			
Logons Inhibited?:  			
Taskman Job Limit:  			
Max sign-ons: 			
Current number of active jobs: 			
 appears to be down!			
SUBMIT/NOPRINT/NOKEEP/QUEUE=TM$			
SUBMIT/NOPRINT/NOLOG/QUEUE=TM$			
ZTMGRSET Version 			
HELLO! I exist to assist you in correctly initializing the current account.			
 I think it is 			
. Should I continue anyway? N//			
Can't determine the OS type. Exiting ZTMGRSET.			
Need a Patch number to load.			
Patch number to load: 			
I will now rename a group of routines specific to your operating system.			
Which MUMPS system should I install?			
NOT A VALID CHOICE			
Now to load routines common to all systems.			
Installing ^%Z editor			
Setting ^%ZIS('C')			
Want to rename the FileMan routines: No//			
- Use autostart to do ZTMB don't resave as STUSER.			
ZL @FROM ZS @TO			
Now, I will check your % globals.			
TASK'S^14.4^			
FAILED ACCESS ATTEMPTS LOG^3.05^^			
PROGRAMMER MODE LOG^3.07^^			
MGR_SUB_			
NO-OPTION			
TaskMan now in 'WAIT STATE'			
Are you sure you want to stop TaskMan? NO// 			
Answer YES to shut down all Task Managers on current the volume set.			
TaskMan NOT shut down.			
Shutting down TaskMan.			
SMAN(NODE)			
Should active submanagers shut down after finishing their current tasks? NO// 			
YESyesNOno			
Please answer YES or NO.			
SSUB(NODE)			
Okay!			
LAST UPDATED			
Live :			
Checking Taskman.			
Current $H=			
RUN NODE=			
Taskman is 			
late by 			
 shutting down			
 not running.			
Checking the Status List:			
  Node      weight  status			
The Status List is 			
Checking the Schedule List:			
Taskman has 			
 of them 			
  First task is 			
 seconds late.			
Checking the IO Lists:			
  Last TM scan: 			
Last Dev: 			
There are no tasks waiting for devices.			
 is not available,			
 is allocated,			
 is AVAILABLE,			
one task			
Checking the Job List:			
are no tasks			
 waiting for 			
Not responding			
Out Of Service			
Checking the Task List:			
 currently running.			
Sub-Managers told to Wait.			
On node 			
are no			
 free Sub-Manager(s).			
BWait			
SUB-MANAGERS ARE NOT STARTING.			
Enter monitor action: UPDATE// 			
Mode set to 			
Enter <RETURN> to update the monitor screen.			
Enter ^ to exit the monitor.			
Enter E to inspect the TaskMan Error file.			
Enter P to see taskman parameters.			
Enter R to see busy Resource slots.			
Enter S to see a system status listing.			
Enter ? to see this message.			
Enter ?? to inspect the tasks in the monitor's lists.			
In the wrong account.			
Resource 			
Slot: 			
This will move the complete text of the routines selected to			
the MGR account of the system being moved to.			
If you send a large number of routines you may run out of disk space			
on the target system.			
 send what routines!			
You're in 			
Then...			
Starting to send!			
as task # 			
in UCI: 			
To which Volume Set (2-7 letters or * for all) to send routines? 			
THIS IS THE SAME SYSTEM!!			
Auto-load or Manual: Manual//			
Enter UCI to unload into: 			
>>ROUTINES WILL NOW BE SENT TO 			
 AS TASK # 			
  accessed by uci,volume: 			
REMEMBER YOU MUST LOAD THE ROUTINES IN MANUALLY AT THE OTHER CPU			
WITH 'D IN^%ZTMOVE'			
F I=1:1 S R=$O(^UTILITY($J,R)) Q:R'?1AP.ANP  ZL @R W $J(R,10) S ^[MGR,SYSM]%ZTSK(ZTSK,I,0)=R F J=1:1 S T=$T(+J) Q:T=			
 transfered from 			
>>ROUTINES WILL NOW BE SENT TO THIS MACHINE AS TASK # 			
ZTMOVE of routines to 			
CANNOT SEND TO '			
Error exit			
Delete Task After Loading? 			
No such task number exists.			
Not a 'ZTMOVE' task!			
READY TO BE LOADED INTO '			
F J=1:1:N ZR  S R=^%ZTSK(ZTSK,J,0) X ZTL ZS @R			
ZR  X ZTL ZS @R			
D ERROR^%ZTMS HALT			
Sub 			
$ETRP ZTMS$			
 stopped because of an error			
Stopped because of an error			
Caused by the submanager while trapping an error.			
an unknown task.			
Caused by the submanager.			
Caused by the submanager while preparing 			
Caused by submanager after 			
Caused by 			
Stopped by User			
No Lock C			
No Lock JOBQ			
No Lock IO			
IO TIME			
No routine at destination 			
rescheduled for busy device			
BTask 			
Started Running			
1 General error			
Job asked to stop			
No Lock 			
Discarded Because Incomplete			
Got 			
PRINTS FIRST LINES			
(A)lpha, (D)ate ,(P)atched, OR (S)ize ORDER: A//			
Include line 2? 			
FIRST LINES PRINT			
    FIRST LINE LIST:			
    SIZE RANKING:			
Enter Return to continue			
    REVERSE DATE ORDER:			
    Patched routines			
Routine Print:			
Want to start each routine on a new page: Yes// 			
Enter Yes to start each routine on a new page.			
No for the old way.			
Want line numbers: No//			
Enter Yes to have line numbers, O for offset numbers, No for no line numbers.			
YyNnOo			
NO routines selected.			
ROUTINE LIST			
Display Patches for Selected Routines			
No routines were selected.			
Installed Patch Listing			
Processing routines...			
Total Patches = 			
  Total Routines = 			
Enter RETURN to 			
continue or '^' to exit: 			
Installed Patches for Selected Routines 			
Patch #			
ROUTINE DELETE			
 routines to DELETE, OK: NO// 			
List of routines to DELETE			
** TROUBLE ** - ** CALL IRM NOW! **			
RECORDING THAT AN ERROR OCCURRED ---			
Sorry 'bout that			
--Interrupt Acknowledged			
NOPEN>^XUS			
RECORDING THAT AN ERROR OCCURED ---			
Waiting 			
--Interupt Acknowledged			
This routine will rename the correct routine to ZU for you.			
Don't know what to do.			
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
####################	####################	####################	
